Buffer Buffer Amplifiers 1,006

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Unity Gain Bandwidth	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Minimum Common Mode Reject Ratio	Technology	Nominal Common Mode Reject Ratio	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Slew Rate	Sub-Category	Nominal Slow Rate	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Output Current	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
CLC231A8C	Texas Instruments	Buffer																								Buffer Amplifiers
CLC5612IM	Texas Instruments	Buffer		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-7 V		17 uA	Yes	2		Bipolar		4 mA	-5 V		5 V		Small Outline	SOP8,.25	200 V/us	Buffer Amplifiers	290 V/us	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	17 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.753 mm)	0.154 in (3.899 mm)		50 mA	49 MHz				0.193 in (4.902 mm)
BUF04701AIDGSRG4	Texas Instruments	Buffer	Automotive	Gull Wing	10	TSSOP	Square	Plastic/Epoxy		-6.6 V	7 mV	10 pA	Yes	4		CMOS		1.5 mA	-5 V		5 V	3.5/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20		Buffer Amplifiers	10 V/us	6.6 V	0.02 in (0.5 mm)	125 °C (257 °F)	10 pA	-40 °C (-40 °F)		Dual	S-PDSO-G10	2	0.043 in (1.1 mm)	0.118 in (3 mm)	No		8 MHz		30 s	260 °C (500 °F)	0.118 in (3 mm)
LMC6009MTX	Texas Instruments	Buffer		Gull Wing	48	TSSOP	Rectangular	Plastic/Epoxy				1.5 μA	Yes	9		CMOS		6 mA		Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP48,.3,20		Buffer Amplifiers		6.5 V	0.02 in (0.5 mm)	75 °C (167 °F)	1.5 uA	-20 °C (-4 °F)		Dual	R-PDSO-G28		0.043 in (1.1 mm)	0.24 in (6.1 mm)							0.492 in (12.5 mm)
CLC115ALC	Texas Instruments	Buffer		No Lead		DIE				-7 V		20 uA	Yes	4		Bipolar		61 mA	-5 V		5 V		Uncased Chip	DIE OR CHIP	2200 V/us	Buffer Amplifiers	2700 V/us	7 V		85 °C (185 °F)	20 uA	-40 °C (-40 °F)		Upper	X-XUUC-N					48 mA	700 MHz
LMH6559MAX	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	25 mV	14 uA	Yes	1					-5 V		5 V		Small Outline			Buffer Amplifiers	4580 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	50 mA	1050 MHz	e0	20 s	235 °C (455 °F)	0.193 in (4.902 mm)
OPA832ID	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	80 MHz	-6.5 V	7 mV	13 uA	Yes	1	72 dB	Bipolar	72 dB	4.7 mA	-5 V	Tube	5 V		Small Outline			Buffer Amplifiers	350 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	55 A		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
BUF07702PWP	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			15 mV	200 pA	Yes	1							10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		0 °C (32 °F)		Dual	R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.256 in (6.5 mm)
LM310JGP4	Texas Instruments	Buffer	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic					No	1					-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-XDIP-T8
LMH6321MR	Texas Instruments	Buffer	Automotive	Gull Wing	8	HLSOP	Rectangular	Plastic/Epoxy		-18 V	52 mV	17 uA	Yes	1				20.5 mA	-15 V		15 V	±5/±15 V	Small Outline, Heat Sink/Slug, Low Profile	SOP8,.25		Buffer Amplifiers	2900 V/us	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	17 uA	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	3	0.066 in (1.68 mm)	0.155 in (3.94 mm)	No	300 mA	110 MHz	e0		260 °C (500 °F)	0.194 in (4.93 mm)
CLC109ALC	Texas Instruments	Buffer	Military	No Lead	4	DIE				-7 V	5 mV	4 uA	Yes	1		Bipolar		4 mA	-5 V		5 V		Uncased Chip		250 V/us		350 V/us	7 V		125 °C (257 °F)		-55 °C (-67 °F)		Upper	X-XUUC-N4				No	40 mA	270 MHz
BUF04701AIPWRG4	Texas Instruments	Buffer	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		-6.6 V	7 mV	10 pA	Yes	4		CMOS		6.8 mA	-5 V		5 V	3.5/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers	10 V/us	6.6 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		8 MHz	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
BUF600AU	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6 V	30 mV	5 uA	Yes	1		Bipolar			-5 V		5 V		Small Outline			Buffer Amplifiers	3400 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		320 MHz				0.193 in (4.9 mm)
OPA3692IDG4	Texas Instruments	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		-6.5 V	2.5 mV	56 uA	Yes	3		Bipolar		15.3 mA	-5 V	Tube	5 V		Small Outline			Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G16	2	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	-10 A	140 MHz	e4	30 s	260 °C (500 °F)	0.39 in (9.9 mm)
THS7314DRG4	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy					Yes	3		CMOS		25 mA			3.3 V	3.3/5 V	Small Outline	SOP8,.25		Buffer Amplifiers		5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		10.6 MHz	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMH6560MA	Texas Instruments	Buffer	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		-6.5 V	25 mV	-14 μA	Yes	4				63 mA	-5 V	Rail	5 V		Small Outline	SOP14,.25		Buffer Amplifiers	3100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	-10 μA	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.753 mm)	0.154 in (3.899 mm)		40 mA					0.34 in (8.6235 mm)
LM6321M	Texas Instruments	Buffer	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		-18 V	100 mV	7 uA	Yes	1					-15 V		15 V		Small Outline			Buffer Amplifiers	800 V/us	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDSO-G14		0.069 in (1.753 mm)	0.154 in (3.899 mm)			50 MHz				0.34 in (8.6235 mm)
OPA3682E/250	Texas Instruments	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	3		Bipolar			-5 V		5 V		Small Outline			Buffer Amplifiers	1200 V/us	6.5 V	0.025 in (0.635 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No						0.193 in (4.9 mm)
LMH6560MT	Texas Instruments	Buffer		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		-6.5 V	25 mV	14 uA	Yes	4				63 mA	-5 V	Rail	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25			3100 V/us	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.043 in (1.1 mm)	0.173 in (4.4 mm)		40 mA					0.197 in (5 mm)
BUF11704AIPWP	Texas Instruments	Buffer	Other	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	10		Bipolar		9 mA		Tube	18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
BUF11702PWPG4	Texas Instruments	Buffer	Commercial	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1							10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	70 °C (158 °F)		0 °C (32 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
OPA2682U/2K5	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	2		Bipolar		13.2 mA	-5 V		5 V	5/±5 V	Small Outline	SOP8,.25	1200 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	55 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	80 mA	330 MHz				0.193 in (4.9 mm)
BUF04701AIPWR	Texas Instruments	Buffer	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		-6.6 V	7 mV	10 pA	Yes	4		CMOS		6.8 mA	-5 V	Tape And Reel	5 V	3.5/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers	10 V/us	6.6 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		8 MHz	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LM310P	Texas Instruments	Buffer	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy					No	1					-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDIP-T8				No
LMH6560MTX	Texas Instruments	Buffer		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		-6.5 V	25 mV	14 uA	Yes	4				63 mA	-5 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25			3100 V/us	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.043 in (1.1 mm)	0.173 in (4.4 mm)		40 mA					0.197 in (5 mm)
BUF05704AIPWPR	Texas Instruments	Buffer	Other	Gull Wing	14	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	4		Bipolar		7.5 mA		Tape And Reel	18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMV115MG	Texas Instruments	Buffer		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy					Yes	1				520 μA		Tape And Reel	2.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08			18 V/us	3.6 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)		50 μA					0.079 in (2 mm)
BUF06704AIPWPRG4	Texas Instruments	Buffer	Other	Gull Wing	16	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6		Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)		Dual	R-PDSO-G16		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.197 in (5 mm)
BUF11705AIPWPRG4	Texas Instruments	Buffer	Other	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV		Yes	10		Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	24 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
LM210JG	Texas Instruments	Buffer	Other	Through-Hole	8	DIP	Rectangular	Ceramic					No	1					-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	85 °C (185 °F)		-25 °C (-13 °F)		Dual	R-XDIP-T8				No
LMH6321TS/NOPB	Texas Instruments	Buffer	Automotive	Gull Wing	7	TO-263	Rectangular	Plastic/Epoxy	110 MHz	-18 V	35 mV	17 uA	Yes	1				14.5 mA	-15 V	Tube	15 V	±5/±15 V	Small Outline	SMSIP7H,.55,50TB		Buffer Amplifiers	1800 V/us	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	15 nA	-40 °C (-40 °F)	Matte Tin	Single	R-PSSO-G7	3	0.189 in (4.79 mm)	0.34 in (8.64 mm)	No	300 mA	110 MHz	e3	30 s	245 °C (473 °F)	0.4 in (10.16 mm)
LMV112SD	Texas Instruments	Buffer	Industrial	No Lead	8	HVSON	Square	Plastic/Epoxy					Yes	2							2.7 V		Small Outline, Heat Sink/Slug, Very Thin Profile			Buffer Amplifiers	110 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-N8	1	0.031 in (0.8 mm)	0.118 in (3 mm)	No		40 MHz	e0		260 °C (500 °F)	0.118 in (3 mm)
LM6225N	Texas Instruments	Buffer	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		-18 V	60 mV	7 uA	No	1									In-Line			Buffer Amplifiers	50 V/us	18 V	0.1 in (2.54 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)			50 MHz				0.755 in (19.18 mm)
DS15BA101TSDX	Texas Instruments	Buffer	Industrial	No Lead	8	VSON	Square	Plastic/Epoxy					Yes	1							3.3 V		Small Outline, Very Thin Profile			Buffer Amplifiers		3.6 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	S-PDSO-N8		0.031 in (0.8 mm)	0.118 in (3 mm)	No						0.118 in (3 mm)
TCA4311DGKRG4	Texas Instruments	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy			175 mV		Yes	1							3 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers		7 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	50 mA		e4	30 s	260 °C (500 °F)	0.118 in (3 mm)
BUF11704AIPWPR	Texas Instruments	Buffer	Other	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	10		Bipolar		9 mA		Tape And Reel	18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
BUF11702PWPR	Texas Instruments	Buffer	Commercial	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			15 mV	200 pA	Yes	1							10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDSO-G28		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.382 in (9.7 mm)
LM210P	Texas Instruments	Buffer	Other	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy					No	1					-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	85 °C (185 °F)		-25 °C (-13 °F)		Dual	R-PDIP-T8				No
BUF07702PWPR	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			15 mV	200 pA	Yes	1							10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		0 °C (32 °F)		Dual	R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.256 in (6.5 mm)
BUF07704AIPWP	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6		Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
LMH6718IMAX	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.75 V	15 mV		Yes	2		Bipolar		3.4 mA	-5 V		5 V	±2.5/±6 V	Small Outline	SOP8,.25	250 V/us	Buffer Amplifiers	600 V/us	6.75 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.899 mm)	No		130 MHz				0.193 in (4.902 mm)
OPA3682E/2K5	Texas Instruments	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	3		Bipolar			-5 V		5 V		Small Outline			Buffer Amplifiers	1200 V/us	6.5 V	0.025 in (0.635 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No						0.193 in (4.9 mm)
LM110JG	Texas Instruments	Buffer	Military	Through-Hole	8	DIP	Rectangular	Ceramic					No	1					-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	125 °C (257 °F)		-55 °C (-67 °F)		Dual	R-XDIP-T8				No
BUF06703PWG4	Texas Instruments	Buffer	Commercial Extended	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy					Yes	1									Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers			0.026 in (0.65 mm)					Dual	R-PDSO-G16		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No						0.197 in (5 mm)
BUF07704AIPWPG4	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6		Bipolar					18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
OPA682N-3K	Texas Instruments	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	1		Bipolar		6.6 mA	-5 V		5 V	±5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	80 mA	220 MHz	e0			0.114 in (2.9 mm)
CLC417AJE	Texas Instruments	Buffer		Gull Wing	8		Rectangular	Plastic/Epoxy		-7 V	8 mV		Yes	2				9.8 mA	-5 V		5 V				250 V/us	Buffer Amplifiers	400 V/us	7 V		85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8					20 mA	52 MHz
DS15BA101SDX/NOPB	Texas Instruments	Buffer	Industrial	No Lead	8	HVSON	Square	Plastic/Epoxy					Yes	1				49 mA		Tape And Reel	3.3 V		Small Outline, Heat Sink/Slug, Very Thin Profile			Buffer Amplifiers		3.6 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N8	3	0.031 in (0.8 mm)	0.118 in (3 mm)				e3	30 s	260 °C (500 °F)	0.118 in (3 mm)

Buffer Amplifiers

Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.

The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.

By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.

Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.