All Microelectronic Parts & Components

Active Filters 6,775

• Active Filters

MAX291ESA+T

Analog Devices

MAX291ESA+T by Analog Devices is an active filter with a switched capacitor design. It operates on +-5V power supplies, with 8 poles and zeros for precise filtering. Ideal for industrial applications requiring lowpass Butterworth response at temperatures ranging from -40 to 85°C.

MAX274AENG+

Analog Devices

MAX274AENG+ by Analog Devices is an active filter with 24 terminals and a rectangular package. It operates at temperatures from -40 to 85°C, with a supply current of 30mA. Ideal for industrial applications requiring precise signal filtering and processing.

MAX7409EUA+

Analog Devices

Analog Devices' MAX7409EUA+ is a CMOS active filter with 1.5 mA Isup, operating b/w -40 to 85°C. It features a lowpass BESSEL response type, 5 poles and zeros, and a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for industrial applications requiring precise signal filtering in compact spaces.

MAX7409EUA+T

Analog Devices

Analog Devices' MAX7409EUA+T is a CMOS active filter with 5 poles and zeros, operating b/w -40 to 85°C. It has a lowpass Bessel response type with a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for industrial applications requiring switched capacitor filters in compact SOT-23 packages.

HMC892ALP5E

Analog Devices

Analog Devices' HMC892ALP5E is a 32-terminal switched capacitor active filter in a square chip carrier package. With response type as band pass, it operates b/w -40 to 85°C and has a peak reflow temperature of 260°C. Ideal for industrial applications requiring precise filtering in compact spaces.

Amplifiers 153,077

• Buffer Amplifiers

• Comparators

• Instrumentation Amplifiers

• Isolation Amplifiers

• Operational Amplifiers (Op Amps)

• Other Function Amplifiers

• Sample & Hold ICs

MAX40001ANT12+T

Analog Devices

MAX40001ANT12+T by Analog Devices is a BICMOS COMPARATOR with 14000uV Max Input Offset Voltage, 0.005uA Max Average Bias Current, and 3.3V Nominal Voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and OPEN-DRAIN output type.

BU7295HFV-TR

ROHM

ROHM's BU7295HFV-TR is a CMOS operational amplifier with 6000uV max input offset voltage, 60dB common mode reject ratio, and 1000kHz unity gain bandwidth. Ideal for industrial applications requiring low-bias micropower amplification in compact designs.

LM2901Q4T

STMicroelectronics

LM2901Q4T by STMicroelectronics is a quad comparator with 4 functions, operating at -40 to 125 °C. It has a max supply voltage of 36V and bias current of 0.25uA @25C. Ideal for automotive applications due to its bipolar technology and open-collector output type.

AD8646ARZ-REEL7

Analog Devices

AD8646ARZ-REEL7 by Analog Devices is an Operational Amplifier with a Max Input Offset Voltage of 3200uV, Nominal Voltage of 5V, and Nominal Unity Gain Bandwidth of 24000kHz. It is used in automotive applications due to its low-bias feature and operates within a temperature range of -40 to 125°C.

LMV761MFX/NOPB

Texas Instruments

LMV761MFX/NOPB by Texas Instruments is a comparator with 1000uV max input offset voltage, 0.00005uA max average bias current, and 120ns nominal response time. Ideal for automotive applications due to AEC-Q100 screening level, it operates b/w -40 to 125 °C with a supply voltage range of 2.7-5V.

ACPL-C784-000E

Broadcom

Broadcom's ACPL-C784-000E is an Isolation Amplifier with 5V supply, 100MHz bandwidth, and 5000V isolation voltage. Ideal for industrial applications requiring high common mode voltage tolerance and small outline package design.

MAX9028EBT+T

Analog Devices

Analog Devices' MAX9028EBT+T is a BICMOS technology comparator with 10000uV max input offset voltage, 0.002uA max average bias current, and 5V nominal voltage. Ideal for industrial applications requiring open-drain output type in a compact grid array package.

MCP609-I/SL

Microchip Technology

MCP609-I/SL by Microchip Technology is a CMOS Operational Amplifier with low-offset and low-bias features. It offers a high min voltage gain of 100,000 and nominal unity gain bandwidth of 155 kHz. Ideal for industrial applications requiring micropower amplification in compact designs.

LTC6244IMS8#PBF

Analog Devices

LTC6244IMS8#PBF by Analog Devices is a CMOS Operational Amplifier with 300uV Max Input Offset Voltage, 105dB Nominal CMRR, and 50000kHz Unity Gain Bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package with dual terminals and low power consumption.

SM3008

Api Technologies

Other Amplifiers;

OP462GSZ-REEL7

Analog Devices

Analog Devices' OP462GSZ-REEL7 is a voltage-feedback operational amplifier with 4 functions, offering a max input offset voltage of 800uV and a nominal unity gain bandwidth of 15MHz. Ideal for automotive applications, it operates at temperatures ranging from -40 to 125°C and has a small outline package style.

TL084ACDT

STMicroelectronics

TL084ACDT by STMicroelectronics is a quad operational amplifier with 4 functions. It has a max input offset voltage of 7000 uV and a min slew rate of 8 V/us. Ideal for applications requiring low-bias current, such as precision signal processing in commercial-grade electronics.

LMC7221BIMX

Texas Instruments

LMC7221BIMX by Texas Instruments is a CMOS comparator with 18000 uV max input offset voltage and 0.00000004 uA max average bias current. It operates in industrial temperature range, suitable for applications requiring open-drain output type and small outline package style.

LF356M/NOPB

Texas Instruments

LF356M/NOPB by Texas Instruments is an operational amplifier with 13000uV max input offset voltage, 100dB common mode reject ratio, and 7.5V/us min slew rate. Ideal for applications requiring precise signal amplification in commercial temperature environments.

LTC2051IDD#PBF

Analog Devices

LTC2051IDD#PBF by Analog Devices is a CMOS operational amplifier with 130 dB CMRR, 3 uV max input offset voltage, and 3000 kHz unity gain bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package with dual terminals and low power consumption.

AD8219BRMZ-RL

Analog Devices

AD8219BRMZ-RL by Analog Devices is an operational amplifier with a small outline, thin profile package. It features 8 terminals in a rectangular shape with matte tin finish and dual terminal position. Ideal for automotive applications due to its compact size and high temperature grade of 260°C peak reflow temperature.

ADL5569BCPZ-R7

Analog Devices

ADL5569BCPZ-R7 by Analog Devices is a dual operational amplifier with 47 dB CMRR, 5V supply voltage, and 0.024 V/us slew rate. Ideal for industrial applications requiring precise signal amplification in a compact chip carrier package with quad terminals.

LT6015IS5#TRMPBF

Analog Devices

LT6015IS5#TRMPBF by Analog Devices is a small outline operational amplifier with a max input offset voltage of 250 uV, a nominal common mode reject ratio of 126 dB, and a unity gain bandwidth of 3300 kHz. It is commonly used in industrial applications requiring low bias current and high precision amplification.

LT1354CS8#TRPBF

Analog Devices

LT1354CS8#TRPBF by Analog Devices is an operational amplifier with 800uV max input offset voltage, 0.3uA max average bias current, and 80dB nominal CMRR. Ideal for industrial applications requiring a small outline package style and bipolar technology with a unity gain bandwidth of 12MHz.

TLC372CPW

Texas Instruments

TLC372CPW by Texas Instruments is a CMOS comparator with 2 functions, 6500 uV max input offset voltage, and 0.0006 uA max average bias current. Ideal for applications requiring open-collector output type, it operates b/w 0-70 °C at supply voltages of 5V to 18V in commercial temperature grade environments.

Anti-Static, ESD, Clean Room Products 4,380

• Anti-Static, ESD Bags, Materials

• Anti-Static, ESD Clothing

• Anti-Static, ESD Device Containers

• Anti-Static, ESD Grounding Mats

• Anti-Static, ESD Straps, Grounding Cords

• Anti-Static, ESD, Clean Room Accessories

• Clean Room Swabs and Brushes

• Clean Room Treatments, Cleaners, Wipes

• Ionizer Equipment

• Modular ESD Desks, Workstations

• Monitors, Testers

Batteries 4,054

• Batteries

VL-2020/HFN

Panasonic

Panasonic VL-2020/HFN battery is a 3V secondary type with 0.02 Ah capacity. With dimensions of 20mm diameter and 2mm height, it's ideal for small electronic devices. Operating b/w -20 to 60 °C, its chemical composition includes VANADIUM PENTOXIDE LITHIUM.

NP2-12

Enersys

Enersys NP2-12 is a 12V lead calcium alloy battery with 2Ah capacity. It operates b/w -15 to 50 °C and has approvals from IEC and UL. Ideal for applications requiring a compact, lightweight secondary battery with F1 terminals, such as portable electronics or emergency lighting systems.

BR-2477A/FBN

Panasonic

Panasonic BR-2477A/FBN is a 3V primary battery with 1Ah capacity. With LITHIUM POLY-CARBONMONOFLOURIDE chemistry, it operates b/w -40°C to 125°C. Ideal for low-power devices like sensors, meters, and memory backup due to its compact size of 24.6mm diameter and 7.6mm height.

CR2477N

Renata Sa

Renata Sa's CR2477N battery is a 3V lithium primary cell with 0.95 Ah capacity. With dimensions of 24.5mm diameter and 7.7mm height, it weighs 8.3g and operates b/w -40°C to 85°C. Ideal for devices requiring a reliable power source in various temperatures and conditions.

LS14500

Saft Sa

Saft Sa LS14500 AA battery with 2.6Ah capacity, 3.6V voltage, and LITHIUM-THIONYL CHLORIDE composition. Ideal for low-temp applications (-60°C) requiring a reliable power source with approvals from IEC and UL. Features button(+) and flat(-) terminals, weighing 17g at 50.28mm height and 14.62mm diameter.

MS614SE-FL28E

Seiko Instruments Usa

MS614SE-FL28E by Seiko Instruments Usa is a 3V lithium battery with a capacity of 0.0034 Ah. It has a cut-off voltage of 2V, suitable for applications requiring small, lightweight power sources. With dimensions of 6.8mm diameter and 1.4mm height, it is ideal for compact electronic devices like wearables or IoT sensors.

381

Renata Sa

Renata Sa 381 battery is a primary cell with 1.55V voltage and 0.05Ah capacity. With Zn/MnO2 chemistry, it operates b/w -10°C to 60°C, making it ideal for small devices like watches due to its compact size of 11.6mm diameter and 2.05mm height.

CR2450

Panasonic

Panasonic CR2450 battery, with 3V voltage and 0.62 Ah capacity, is a lithium manganese dioxide cell. Measuring 24.5mm in diameter and 5mm in height, it operates b/w -30°C to 85°C. Ideal for applications requiring a primary button-type battery with a flat positive terminal.

LS14250CNA

Saft Sa

LS14250CNA by Saft Sa is a 3.6V LITHIUM-THIONYL CHLORIDE battery with 1.2Ah capacity, ideal for low-power devices. With a cut-off voltage of 2V, it operates b/w -60°C to 85°C temperatures. Measuring at 25.15mm x 14.55mm and weighing 8.9g, it's approved by IEC and UL for various applications.

364

Renata Sa

Renata Sa's 364 battery is a primary button cell with a voltage of 1.55V and capacity of 0.019Ah. With dimensions of 2.15mm x 6.8mm, it weighs 0.3g and operates b/w -10°C to 60°C, making it ideal for small electronic devices requiring reliable power supply.

LS33600

Saft Sa

Saft Sa LS33600 battery, 3.6V, 17Ah capacity, D size. Ideal for industrial applications with -60 to 85 °C operating range. Features Lithium-Thionyl Chloride chemistry and UL approval.

BR1225

Panasonic

Panasonic BR1225 is a 3V lithium battery with 0.048 Ah capacity. With -30 to 85 °C operating range, it's ideal for small devices like watches and calculators. Measuring 12.5mm in diameter and 2.5mm in height, it weighs 0.8g and has a button(-) terminal type.

RRC2040

RRC power solutions

RRC2040 by Rrc Power Solutions is a 10.8V lithium-ion battery with a capacity of 3.35Ah. It has CE, UN, and UL approvals and is suitable for various applications requiring a compact and lightweight power source.

CR2450N

Renata Sa

Renata Sa's CR2450N battery is a LITHIUM primary cell with 3V voltage, 0.54 Ah capacity. With -40 to 85 °C operating range, it suits small devices like watches due to its compact size of 24.5x5 mm and weight of 5.9 g.

LS14250

Saft Sa

LS14250 by Saft Sa is a 3.6V LITHIUM-THIONYL CHLORIDE battery with 1.2 Ah capacity, ideal for low-power devices. It has a cut-off voltage of 2V and operates b/w -60°C to 85°C, making it suitable for industrial sensors and memory backup applications. UL approved, this 1/2AA size battery weighs 8.9g with dimensions of 25.15mm x 14.55mm (H x D).

CR1632.IB

The Swatch Group

CR1632.IB by The Swatch Group is a 3V lithium manganese dioxide battery with 0.125 Ah capacity. Measuring 16mm in diameter and 3.2mm in height, it weighs 1.8g and operates b/w -40°C to 85°C. Ideal for applications requiring a reliable power source in compact devices like watches or small electronics.

Capacitors 165,539,168

• Capacitor Arrays & Networks

• Fixed Capacitors

• Other Function Capacitors

• Special Function Capacitors

• Trimmer & Variable Capacitors

MKT1813-568-255

Vishay Intertechnology

Vishay Intertechnology's MKT1813-568-255 is a 6.8uF film capacitor with 10% tolerance, suitable for temperatures ranging from -55 to 100°C. With a rated DC voltage of 250V, it is designed for through-hole mounting applications in various electronic circuits. The axial package style and polyester dielectric material make it ideal for bulk packaging needs.

CC1206KKX7RCBB472

Yageo

Yageo CC1206KKX7RCBB472 is a ceramic capacitor with 0.0047uF capacitance and 1000V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high voltage handling capabilities.

T495D226K025ATE230

KEMET Corporation

KEMET T495D226K025ATE230 is a 22uF, 25V tantalum capacitor with low Tan Delta of 0.06 and ESR of 230mohm. Ideal for applications requiring high ripple current (323.2mA) and operating temperatures ranging from -55 to 125 °C, in SMT packages.

CL31B106KAHVPNE

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B106KAHVPNE is a 1206 SMT ceramic capacitor with 10uF capacitance and 25V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable capacitance in compact designs.

GCM1885C1H101JA16J

Murata Manufacturing

Murata Manufacturing's GCM1885C1H101JA16J is a ceramic capacitor with capacitance of 0.0001uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.

C0402C103K4RAC7867

KEMET Corporation

KEMET Corporation's C0402C103K4RAC7867 is a ceramic capacitor with 0.01uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and stable performance.

GRM155R61A475MEAAD

Murata Manufacturing

Murata Manufacturing's GRM155R61A475MEAAD is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.

100B820JT500XT

KYOCERA AVX

100B820JT500XT by KYOCERA AVX is a ceramic capacitor with 0.000082 uF capacitance and 500V URdc. It features a porcelain dielectric material, P90 temp characteristics, and 2 terminals for SMT applications. With a compact size of 2.79mm x 2.79mm x 2.59mm, it operates b/w -55 to 125 °C, making it ideal for various electronic circuits requiring high voltage tolerance.

CGA6P3X8R1C106K250AB

TDK

TDK CGA6P3X8R1C106K250AB is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X8R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and -55 to 150°C operating temperature range.

CGA4J1X7R1H475K125AC

TDK

CGA4J1X7R1H475K125AC by TDK is a ceramic capacitor with 4.7uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and AEC-Q200 standard compliance. Ideal for automotive applications requiring compact SMT capacitors with high reliability and low temperature coefficient.

T491A475K016AT

KEMET Corporation

KEMET T491A475K016AT is a 4.7uF, 16V tantalum capacitor with low ESR of 4000mohm and tan delta of 0.06. Ideal for applications requiring high ripple current (55mA) in compact SMT designs with operating temperatures from -55 to 125°C.

GRM158C80G226ME01D

Murata Manufacturing

The Murata Manufacturing GRM158C80G226ME01D is a ceramic capacitor with 22uF capacitance and 4V rated DC voltage. It features a rectangular package, SMT style, and X6S temperature characteristics code. Ideal for surface mount applications in electronics requiring compact components with high capacitance and low voltage requirements.

GRM188R61E106MA73D

Murata Manufacturing

GRM188R61E106MA73D by Murata is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.

06031A8R0CAT2A

KYOCERA AVX

06031A8R0CAT2A by KYOCERA AVX is a CERAMIC CAPACITOR with 0.000008 uF capacitance and 100 V rated DC voltage. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring high precision and stability in a wide temperature range from -55 to 125 °C. The surface mount package with matte tin over nickel finish makes it ideal for compact electronic devices.

GCM1885C1H102JA16J

Murata Manufacturing

Murata Manufacturing's GCM1885C1H102JA16J is a ceramic capacitor with capacitance of 0.001uF, rated DC voltage of 50V, and temperature coefficient of 30ppm/°C. It is ideal for automotive applications due to AEC-Q200 standard compliance and operating temperature range from -55 to 125 °C.

6TPE680MI

Panasonic

Panasonic 6TPE680MI is a Tantalum Capacitor with 680uF capacitance and 6.3V rated DC voltage. It has low ESR of 18mohm, making it suitable for high ripple current applications. With a compact SMT package style, it is ideal for use in electronic devices requiring reliable power supply filtering.

CC0805KRX7R7BB224

Yageo

Yageo CC0805KRX7R7BB224 is a ceramic capacitor with 0.22uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.

108LBB250M2DG

Cornell Dubilier Electronics

108LBB250M2DG by Cornell Dubilier Electronics is a 1000uF aluminum electrolytic capacitor with a rated DC voltage of 250V. It features a tan delta of 0.1, leakage current of 1.5mA, and ripple current of 4280mA, making it ideal for applications requiring high capacitance and voltage stability in industrial electronics.

MAL218297003E3

Vishay Intertechnology

Vishay Intertechnology's MAL218297003E3 is a 47uF, 35V aluminum electrolytic capacitor with solid polymer dielectric material. It features low tan delta of 0.12 and high ripple current of 130mA, suitable for surface mount applications in electronics requiring stable capacitance at temperatures ranging from -55 to 105°C.

C0402X5R100-106MNP

Venkel

Venkel's C0402X5R100-106MNP is a 10uF ceramic capacitor with X5R temp. characteristics, suitable for SMT mounting. It has a capacitance tolerance of ±20%, operates b/w -55°C to 85°C, and features a compact size of 1x0.5x0.85mm. Ideal for applications requiring stable capacitance in a small form factor at low to moderate voltages.

Chip Carrier IC & Component Sockets 967,200

• Chip Carrier IC & Component Sockets

4620

Keystone Electronics

TRANSISTOR SOCKET;

95.05SPA

Finder

RELAY SOCKET; Housing Material: PLASTIC; No. of Contacts: 8;

VCF4-1000

TE Connectivity

IC SOCKET; Contact Finish (Mating): NOT APPLICABLE; Termination Type: SOLDER; Contact Material: NOT APPLICABLE; No. of Contacts: 1;

9-1393809-1

TE Connectivity

IC SOCKET; Housing Material: POLYCARBONATE; Contact Finish (Mating): NOT APPLICABLE; Contact Material: NOT APPLICABLE; Termination Type: SOLDER;

4-1419106-0

TE Connectivity

IC SOCKET; Termination Type: SOLDER; Contact Finish (Mating): NOT APPLICABLE; Contact Material: NOT APPLICABLE;

788-304

Wago

RELAY SOCKET; Contact Material: NOT SPECIFIED; Contact Finish (Termination): NOT APPLICABLE; Contact Finish (Mating): NOT SPECIFIED;

2227MC-08-03-18-F1

Multicomp Pro

IC SOCKET; Device Type Used On: DIP8; Housing Material: POLYBUTYLENE TEREPHTHALATE; No. of Contacts: 8; JESD-609 Code: e4; Additional Features: STANDARD: UL94-0;

93.01.7.024

Finder

RELAY SOCKET; Device Type Used On: RELAY;

P2R-05P

Omron

RELAY SOCKET; Contact Finish (Mating): NOT SPECIFIED; Contact Material: NOT SPECIFIED; No. of Contacts: 5; Contact Finish (Termination): NOT APPLICABLE;

788-312

Wago

RELAY SOCKET; Contact Material: NOT SPECIFIED; Contact Finish (Mating): NOT SPECIFIED; Contact Finish (Termination): NOT APPLICABLE;

214-44-308-01-670800

Mill-max Mfg

214-44-308-01-670800 by Mill-max Mfg is a Chip Carrier IC Socket with NYLON46 housing material and MATTE TIN finish. It is designed for DIP8 devices, featuring 8 contacts in RECTANGLE configuration. Ideal for secure connection of integrated circuits in various electronic applications.

110-93-316-41-001000

Mill-max Mfg

Mill-max Mfg's 110-93-316-41-001000 is a Chip Carrier IC Socket with PCT Polyester housing and Beryllium Copper contacts. It features 16 contacts with Tin/Lead finish, suitable for DIP16 devices. Ideal for applications requiring reliable connections in electronic circuits.

7-1393161-3

TE Connectivity

IC SOCKET; Housing Material: POLYAMIDE; Contact Material: NOT APPLICABLE; Contact Finish (Mating): NOT APPLICABLE; Termination Type: SOLDER;

SR3P-05

Idec

Idec's SR3P-05 chip carrier IC socket has 11 RND PIN-SKT contacts, rated for 10A current. With a temperature range of -5 to 40°C, it is ideal for relay applications requiring secure screw terminations. Measuring 2.165" x 1.654" x 1.122", this RELAY SOCKET offers reliable connectivity in various electronic devices.

8134-HC-6P2

TE Connectivity

TE Connectivity's 8134-HC-6P2 is a Chip Carrier IC Socket with PRESS FIT termination, RND PIN-SKT contact style, and 5A current rating. Ideal for applications requiring a temperature range of -65°C to 125°C, this socket offers reliable performance in various electronic devices.

1050281001

Molex

OTHER SOCKET; Device Type Used On: CAMERA; Housing Material: PLASTIC; Contact Finish (Mating): NOT APPLICABLE; No. of Contacts: 32; Additional Features: STANDARD: UL 94V-0;

95.15.2SMA

Finder

RELAY SOCKET; Contact Finish (Termination): NOT SPECIFIED; Contact Material: NOT SPECIFIED; No. of Contacts: 8; Contact Finish (Mating): NOT SPECIFIED;

Circuit Protection 5,209,102

• Circuit Breaker

• Fuses

3403.0169.24

Schurter Ag

3403.0169.24 fuse by Schurter Ag is a 2A, 250V electric fuse with a time lag blow characteristic and rated breaking capacity of 200A. Measuring at 10.1mm x 3mm x 3mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms.

051412.5MXEP

Littelfuse

ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 500 V; Rated Current: 12.5 A; Terminal Shape: PIN WIRE; Packing Method: BULK;

0326010.MXP

Littelfuse

Littelfuse 0326010.MXP fuse, rated at 10A and 250V, offers a trip time of 5s. With a pre-arcing rating of 137 A2/s, it provides electric circuit protection in various applications like inline mounting for CE, CSA, KC, PSE, and UL standards compliance.

8-1393254-3

TE Connectivity

TE Connectivity 8-1393254-3 is a 50A circuit breaker with 277V AC voltage rating. Featuring a trip time of 2.2s, it has a rated breaking capacity of 5000A. Ideal for panel mounting in applications requiring magnetic circuit protection and series trip functionality.

39214000000

Littelfuse

The Littelfuse 39214000000 fuse has a rated current of 4A and a nominal joule integral of 126.4J, with a trip time of 0.02s. It is designed for circuit protection with a rated AC voltage of 250V, suitable for applications requiring time lag blow characteristic and terminal shape PIN WIRE.

37212500001

Littelfuse

Littelfuse 37212500001 fuse has a rated current of 2.5A and trip time of 0.02s, suitable for circuit protection in applications requiring a 250V AC voltage rating. With a blow characteristic of TIME LAG, it offers a rated breaking capacity of 35A and operates within -40 to 85°C temperature range.

KTK-R-20

Eaton Corporation

Eaton Corporation's KTK-R-20 fuse, rated at 20A and 600V, features fast blow characteristic with a breaking capacity of 200kA. This CC-class fuse, with nickel terminal finish, is ideal for electric circuit protection in applications requiring inline mounting. Compliant with CE, CSA, and UL standards, it comes in a box packing method.

G4A01216C

Therm-o-disc

G4A01216C by Therm-o-disc is a thermal fuse with 250V rated voltage and 10A current. It features a pin wire terminal shape, through-hole mounting, and TR packing method. Ideal for circuit protection in various applications due to its compact body size of 4mm diameter and 14.7mm height.

04351.75KRHF

Littelfuse

ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1.75 A; Terminal Shape: WRAPAROUND; Body Width: .56 inch;

0452007.NRL

Littelfuse

ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 72 V; Rated DC Voltage: 75 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND;

FNQ-R-5

Eaton Corporation

Eaton Corporation's FNQ-R-5 fuse, rated at 5A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm, it is suitable for circuit protection in various applications requiring a high breaking capacity of 200kA. The fuse is designed with nickel-finished end caps for use in inline/holder mounting configurations according to CE, CSA, and UL standards.

FWP-50A14F

Eaton Corporation

Eaton Corporation's FWP-50A14F fuse offers 200J nominal joule integral, 700V AC/DC rated voltage, and 50A current rating. Ideal for electric circuit protection in various applications with its IEC and UL standards compliance.

0473005.MRT1L

Littelfuse

Littelfuse 0473005.MRT1L PICO fuse, rated 5A at 125V AC/DC, offers time delay trip of 0.002s. With a pre-arcing rating of 54.8 A2/s and rated breaking capacity of 50A, it provides circuit protection in various applications like electronics and automotive systems.

0451.062MRL

Littelfuse

0451.062MRL by Littelfuse is a NANO fuse with 0.062A rated current and 125V DC voltage. It has a very fast blow characteristic, suitable for electric circuit protection in applications requiring surface mounting feature.

C308F-50MA-TR

Cooper Industries

C308F-50MA-TR by Cooper Industries is a fast blow electric fuse with 0.05A rated current and 250V AC/DC voltage. It comes in tape and reel packing, suitable for inline mounting applications. With a compact size of 3.05mm x 8.7mm, it offers high breaking capacity of 4000A, meeting EN and UL standards for circuit protection needs.

LPJ-60SP

Eaton Corporation

Eaton Corporation LPJ-60SP fuse, rated 60A at 600V AC/300V DC with J class and time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL compliant applications. Dimensions: 27mm x 60.3mm, terminal shape: end cap, breaking capacity: 300kA.

166.7000.5102

Littelfuse

The Littelfuse 166.7000.5102 is an ATO fuse with dimensions of 19mm x 5mm x 13.2mm, rated for 80V and 10A. It has a nominal joule integral of 86.4 J, suitable for circuit protection in applications requiring a rated breaking capacity of up to 1000A and pre-arcing rating of 86.4 A2/s.

34.6821

Schurter Ag

ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 4 A; Terminal Shape: PIN WIRE;

0315015.MXP

Littelfuse

ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 6.99 mm;

SF-1206SA200W-2

Bourns

Bourns SF-1206SA200W-2 fuse, rated 2A with 110V DC voltage, features slow blow characteristic and 0.88J nominal joule integral. Ideal for electric circuit protection in automotive applications due to AEC-Q200 and UL standards compliance.

Connector Accessories 123,061,978

• Assembly Products

• Electrical Wires & Cables

• Heat Shrinks

• Machinery & Tools

• Mil-Spec Backshells and Connector Accessories

5207719-1

TE Connectivity

TE Connectivity 5207719-1 is a female screwlock hardware for all plastic connectors with integral standoffs. Made of cold rolled steel, it supports wire size up to 0 AWG. Mounting options include #4-40 and screws, ideal for various assembly applications.

97-3057-1007(621)

Amphenol

CIRCULAR CONN ACCESSORY; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Shell Sizes: 12SL, 14, 14S; MIL-Connector Accessory Name: CLAMPING ITEM;

15355128

Aptiv

CONNECTOR ACCESSORY;

56134-9000

Molex

Molex 56134-9000 is a crimp terminal contact with a min wire size of 28 AWG and max wire size of 22 AWG. It is commonly used in the assembly products category, specifically for the 51242, 51382, and 51353 series.

CTA-0166

TE Connectivity

TE Connectivity's CTA-0166 is a CRIMP terminal with STRAIGHT contact design for 20-26 AWG wires. Ideal for SIGNAL applications, it features COPPER ALLOY material and ROUND PIN-SOCKET style, with 0.5 mm2 cross section area and 0.195 inch length.

9501060U1000

Belden

Belden 9501060U1000 is a UL-approved electrical wire with stranded construction and PVC jacket. Featuring tinned copper conductor, it has a rated voltage of 300V and can operate b/w -30 to 80°C. Ideal for applications requiring flexible cord and fixture wire with 2 conductors, AWG 24 gauge, and max current of 2.2A.

660-008B14S5-106

Glenair

CONNECTOR ACCESSORY; MIL Conformity: YES; Additional Features: USED WITH: PLUG; Shell Sizes: 14; Associated Military - Specifications: MIL-C-26482; MIL-Connector Accessory Name: COVER ITEM;

206-1204

Wago

TOOL AND MACHINERY;

PE3956-36

Pasternack Enterprises

CABLE ASSEMBLY;

08-50-0113

Molex

Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.

175266-2

TE Connectivity

TE Connectivity's 175266-2 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 to 18 AWG, with 0.043" to 0.083" cable entry. Ideal for power applications, operating b/w -30°C to 105°C.

16020082

Molex

CONNECTOR ACCESSORY;

CA121003-7

ITT Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Material: METAL; IEC Conformity: NO; Shell Sizes: 20; Associated Military - Specifications: MIL-C-5015;

1-66360-2

TE Connectivity

TE Connectivity 1-66360-2 is a CRIMP terminal for CPC/G and M SERIES connectors. It has a finish thickness of 100, supports wire gauge up to 14 AWG, and rated current of 13 A. Ideal for power and signal applications with female contact gender, made of brass material.

350967-2

TE Connectivity

350967-2 by TE Connectivity is a CRIMP terminal with 29.92 finish thickness, rated for 250V and 9A. Ideal for power and signal applications, it has stamped contact design, supports wire gauge from 26 to 18 AWG, and operates b/w -55°C to 85°C temperatures.

VERSAFIT-1/16-0-SP

TE Connectivity

HEAT SHRINK TUBE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 135 Cel; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL;

1316SB0101000

Belden

Wires and Cables;

PE3154-36

Pasternack Enterprises

CABLE ASSEMBLY; Connector Side-1: SMA MALE; Connector Side-2: TNC MALE; Shielding: NO;

10-497643-015

Amphenol

CONNECTOR ACCESSORY; Contact Gender: FEMALE; Terminal Type: SOLDER; MIL Conformity: YES; IEC Conformity: NO; Associated Military - Specifications: MIL-DTL-38999;

3435-0

3m Electronic Products Division

CONNECTOR ACCESSORY; Material: PBT-POLYESTER; Assembly Item Name: KEYING PLUG;

Connectors 93,766,116

5002

Keystone Electronics

INTERCONNECTION DEVICE; Termination Contact Finish: Silver (Ag); Additional Features: NYLON46, 94V-0; JESD-609 Code: e4;

51021-0400

Molex

The Molex 51021-0400 is a board connector with 4 contacts, 0.049" pitch, and 353VAC voltage rating. Ideal for commercial applications, it features a polarization key, POLYBUTYLENE TEREPHTHALATE insulator, and operates b/w -40 to 105°C.

781715007

Molex

BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;

52465-1471

Molex

Molex 52465-1471 is a 2-row board connector with 14 contacts, 0.8mm terminal pitch, and -40 to 105°C operating temperature range. Ideal for surface mount applications in electronics requiring high UL flammability rating of 94V-0.

B4B-PH-K-S(LF)(SN)

J S T Mfg

B4B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator material and BRASS contact material. Ideal for applications requiring a male SQ PIN-SKT contact style on a RECTANGULAR PCB pattern.

51021-0300

Molex

The Molex 51021-0300 is a board connector with 3 contacts, 0.049" pitch, and insulation resistance of 100M ohm. It has a temperature range of -40 to 85°C, ideal for commercial applications requiring reliable female crimp connectors in cable assemblies with locking mounting option.

FTSH-105-01-L-DV-K-P-TR

Samtec

Samtec's FTSH-105-01-L-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.

382811-2

TE Connectivity

TE Connectivity 382811-2 is a 0.1" pitch interconnection device with GLASS FILLED POLYESTER insulator, rated for 3A signal current. Ideal for board mounting applications, it features a female SQ PIN-SKT contact style and operates b/w -65 to 105 °C.

MMCX-P-P-H-ST-TH1

Samtec

Samtec's MMCX-P-P-H-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold contact finish, and 6 GHz operating frequency. Ideal for commercial applications, it features a 0.138" body diameter, -65 to 125 °C temperature range, and 700VAC dielectric voltage.

2SN-BK-G

Samtec

INTERCONNECTION DEVICE; JESD-609 Code: e4; Insulator Material: GLASS FILLED POLYESTER; Termination Contact Finish: GOLD OVER NICKEL; Maximum Operating Temperature (Cel): 125; Minimum Operating Temperature: -55 Cel;

22057055

Molex

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Mixed Contacts: NO; Termination Type: SOLDER;

1609222

Phoenix Contact

INTERCONNECTION DEVICE;

44432-0401

Molex

The Molex 44432-0401 is a rectangular power connector with 4 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and UL certification.

46992-0210

Molex

The Molex 46992-0210 is a power connector with 0.213" x 0.42" x 0.42" dimensions. Made of POLYAMIDE, it has 2 contacts, UL94V-2 flammability rating, and SQ PIN-SKT contact style. Ideal for cable mounting applications requiring female connectors meeting UL standards.

5-146280-1

TE Connectivity

TE Connectivity 5-146280-1 is a board connector with 0.1" mating pitch, -65 to 105°C operating temp, and 3A signal current rating. It features matte tin finish, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and solder termination for male contacts. Ideal for commercial applications requiring high reliability and UL94V-0 flammability rating.

5015

Keystone Electronics

INTERCONNECTION DEVICE; JESD-609 Code: e4; Termination Contact Finish: Silver (Ag);

5001

Keystone Electronics

INTERCONNECTION DEVICE; Termination Contact Finish: Silver (Ag); JESD-609 Code: e4; Additional Features: NYLON46, 94V-0;

S2B-EH(LF)(SN)

J S T Mfg

S2B-EH(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.098" pitch, 0.295" body length, and 0.165" body width. It features bright tin finish, POLYAMIDE66 insulator, and solder termination for right-angle mounting applications. Ideal for electronics requiring compact connectors with high reliability in tight spaces.

5046181012

Molex

BOARD STACKING CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

2337019-1

TE Connectivity

TE Connectivity 2337019-1 RF Connector features snap coupling, polyethylene insulator, and gold flash shell finish. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting applications in electronic devices. Operating temperature ranges from -40 to 85°C make it suitable for various environments.

Converters 318,051

• Analog Special Purpose Converters

• Analog-to-Digital Converters

• Data Acquisition ADCs & DACs

• Digital Potentiometers (DigiPOT)

• Digital-to-Analog Converters

• Other Function Converters

AD5254BRUZ50-RL7

Analog Devices

AD5254BRUZ50-RL7 by Analog Devices is a 4-function digital potentiometer with 50000 ohm total resistance, 256 positions, and linear resistance law. It operates b/w -40 to 105 °C for industrial applications, offering precise increment/decrement control via CMOS technology at a bandwidth of 0.08 kHz.

LTC1595BCS8#TRPBF

Analog Devices

LTC1595BCS8#TRPBF by Analog Devices is a 16-bit D/A converter with max output voltage of ±10 V, linearity error of 0.0031%, and settling time of 1 µs. It is used in applications requiring precise analog signal generation, such as industrial automation and test equipment.

AD7934BRUZ

Analog Devices

AD7934BRUZ by Analog Devices is a 12-bit ADC with 4 analog input channels, operating at a sample rate of 1.5 MHz. It features a max linearity error of 0.0244% and supports industrial temperature grades. This converter is ideal for applications requiring precise analog-to-digital conversion in compact spaces.

AD5662BRMZ-1REEL7

Analog Devices

AD5662BRMZ-1REEL7 by Analog Devices is a 16-bit DAC with max output voltage of 5.5V, settling time of 10us, and linearity error of 0.0244%. Ideal for automotive applications due to its CMOS technology, serial input format, and low supply current of 0.25mA.

CAT5221WI-00

Catalyst Semiconductor

CAT5221WI-00 by Catalyst Semiconductor is a 2-function Digital Potentiometer with 100kΩ total resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It operates at -40 to 85°C, has a 2-wire serial control interface, and is ideal for industrial applications requiring precise resistance adjustments in compact designs.

LTC1966IMS8#PBF

Analog Devices

LTC1966IMS8#PBF by Analog Devices is an 8-terminal RMS to DC converter with 0.15% linearity error, operating b/w -40°C to 85°C. It has a supply voltage range of 2.7V to 5.5V and can handle input voltages from -5.5V to 5.5V, making it ideal for industrial applications requiring precise signal conversion in a compact square package.

MAX147BCAP+

Analog Devices

MAX147BCAP+ by Analog Devices is a 12-bit ADC with 8 analog in channels, 0.0244% EL, and 0-70°C temp range. Ideal for applications requiring high precision data conversion like industrial automation and sensor interfacing. Features include small outline package, 1.25V max analog input voltage, and 0.133 MHz sample rate.

MAX1291AEEI+

Analog Devices

Analog Devices' MAX1291AEEI+ is a 12-bit ADC with 8 analog in channels, 0.0122% EL, and 3/3.3V supplies. Ideal for industrial applications, it offers a sample rate of 0.25 MHz and operates b/w -40 to 85 °C.

AD7730LBRZ

Analog Devices

AD7730LBRZ by Analog Devices is a 24-bit ADC with 0.0022% linearity error, ideal for industrial applications. It features 2 analog input channels, operates at temperatures from -40 to 85 °C, and has a supply voltage of 5V. This CMOS converter in a small outline package is suitable for precision measurement systems.

LTC1608CG#PBF

Analog Devices

LTC1608CG#PBF by Analog Devices is a 16-bit ADC with 0.0061% linearity error, 0.5 MHz sample rate, and 1.8 us conversion time. Ideal for applications requiring precise analog-to-digital conversion in commercial temperature environments.

AD7705BRUZ-REEL7

Analog Devices

AD7705BRUZ-REEL7 by Analog Devices is a 16-bit ADC with 2 analog input channels, operating at a sample rate of 0.0192 MHz. It features a max linearity error of 0.003% and supports binary and offset binary output bit codes. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package with dual terminal position.

ADS7823EB/250

Texas Instruments

ADS7823EB/250 by Texas Instruments is a 12-bit ADC with 1 analog input channel. It operates at a sample rate of 0.05 MHz and has a max linearity error of 0.0244%. This converter is commonly used in industrial applications requiring precise analog-to-digital conversion.

AD5421BREZ-REEL7

Analog Devices

AD5421BREZ-REEL7 by Analog Devices is a 16-bit D/A converter with 0.012% EL, settling time of 50 us, and operates at -40 to 105 °C. Ideal for industrial applications requiring precise analog signal generation in compact spaces.

ADS62P25IRGCT

Texas Instruments

Texas Instruments ADS62P25IRGCT is a 12-bit ADC with 2 analog in channels, operating at 125 MHz sample rate. It has a max linearity error of 0.0488% and supports input voltages from -2V to +2V. Ideal for industrial applications requiring high-speed and accurate analog-to-digital conversion in a compact chip carrier package.

DS1267BS-100+

Analog Devices

DS1267BS-100+ by Analog Devices is a 3-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 256 positions, and 750 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in compact designs.

DS1803Z-050+T&R

Analog Devices

Analog Devices' DS1803Z-050+T&R is a 2-function digital potentiometer with 50k ohm total resistance, 750 ppm/°C temp coefficient, and 256 positions. It features a 2-wire serial control interface and operates in industrial temperature range. Ideal for applications requiring precise resistance adjustments in compact designs.

AD9788BSVZ

Analog Devices

AD9788BSVZ by Analog Devices is a 16-bit DAC with 0.005% linearity error, 1 V max analog output voltage, and 0.02 us settling time. Ideal for applications requiring precise digital-to-analog conversion in a compact package with quad terminals and serial input format.

AD7866ARUZ-REEL7

Analog Devices

AD7866ARUZ-REEL7 by Analog Devices is a 12-bit ADC with 4 analog input channels, operating at a sample rate of 1 MHz. It features a max linearity error of 0.0366%, suitable for automotive applications due to its temperature grade and low power supply requirements of 3V/5V.

ADS1015IDGST

Texas Instruments

The Texas Instruments ADS1015IDGST is a 12-bit ADC with 4 analog in channels, operating at a sample rate of 0.0033 MHz. With a max linearity error of 0.0122%, it's ideal for automotive applications due to its small outline package and wide temperature range (-40 to 125 °C).

MAX1300AEUG+

Analog Devices

MAX1300AEUG+ by Analog Devices is a 16-bit ADC with 8 analog in channels, 0.0031% EL, and 0.115 MHz sample rate. Ideal for industrial applications, it features a small outline package with dual terminals and operates b/w -40 to 85 °C.

Crystals & Resonators 29,449,651

• Ceramic Resonators

• Crystal Oscillators

• Dielectric Resonators

• SAW Resonators

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

ABS05W-32.768KHZ-D-2-T

Abracon

Abracon's ABS05W-32.768KHZ-D-2-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or IoT devices.

ECS-110.5-20-5PX-TR

Ecs International

ECS-110.5-20-5PX-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 11.05 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -10°C to 70°C makes it versatile for various environments.

ECS-80-18-7SX-TR

Ecs International

ECS-80-18-7SX-TR by Ecs International is an 8 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring a parallel-fundamental crystal resonator, it operates b/w -10°C to 70°C and features a load capacitance of 18 pF.

ABS25-32.768KHZ-6-T

Abracon

Abracon's ABS25-32.768KHZ-6-T crystal oscillator offers 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing at 32.768 MHz frequency, such as IoT devices and wearables.

ABM8G-14.7456MHZ-4-Y-T3

Abracon

ABM8G-14.7456MHZ-4-Y-T3 by Abracon is a crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing at 14.7456 MHz, such as telecommunications equipment or industrial automation systems. Features include 80 ohm series resistance, GOLD OVER NICKEL finish, and surface mounting feature.

CS325S24000000ABJT

Citizen Finedevice

CS325S24000000ABJT by Citizen Finedevice is a 24 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -10 to 60 °C, with low aging at 5 PPM/year.

XRCGB38M400F1S2GR0

Murata Manufacturing

Murata Manufacturing's XRCGB38M400F1S2GR0 crystal oscillator offers 10 ppm frequency tolerance, 20% stability, and 60 ohm series resistance. Ideal for applications requiring a nominal operating frequency of 38.4 MHz, such as telecommunications equipment and consumer electronics.

ABM8G-24.000MHZ-18-D-2-Y-T

Abracon

ABM8G-24.000MHZ-18-D-2-Y-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications equipment and industrial automation systems.

ABM7-25.000MHZ-D-2-Y-T

Abracon

ABM7-25.000MHZ-D-2-Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

ABS07-120-32.768KHZ-T

Abracon

Abracon's ABS07-120-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 162% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in a compact surface-mount package.

ABM3B-27.120MHZ-10-D-1-G-T

Abracon

ABM3B-27.120MHZ-10-D-1-G-T by Abracon is a 27.12 MHz crystal oscillator with 10 ppm frequency tolerance and 15% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, featuring nickel/gold terminal finish and parallel-fundamental type.

FC-13532.7680KA-A5

Seiko Epson

FC-13532.7680KA-A5 by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with GOLD OVER NICKEL terminal finish.

ABM8G-12.000MHZ-18-D-2-Y-T

Abracon

ABM8G-12.000MHZ-18-D-2-Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems. Operating temperature range from -40 to 85 °C with surface mount feature for easy installation.

ABM3B-8.000MHZ-B-2-T

Abracon

ABM3B-8.000MHZ-B-2-T by Abracon is a 8 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, it operates b/w -20 to 70 °C, featuring nickel/gold terminal finish and parallel-fundamental type.

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

LFXTAL003000REEL

Iqd Frequency Products

LFXTAL003000REEL by IQD Frequency Products is a 32.768 MHz crystal oscillator with 20 ppm frequency tolerance and 5 PPM/YEAR aging. Ideal for applications requiring precise timing, it features a parallel-fundamental crystal type and operates b/w -40 to 85 °C temperatures.

ABS06-32.768KHZ-9-1-T

Abracon

Abracon ABS06-32.768KHZ-9-1-T crystal oscillator offers 10 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and wearables due to its compact surface mount design.

FC-13532.7680KA-A3

Seiko Epson

Seiko Epson's FC-13532.7680KA-A3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with gold over nickel terminal finish for reliable performance.

ABM11-32.000MHZ-D2X-T3

Abracon

ABM11-32.000MHZ-D2X-T3 by Abracon is a 32 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85°C, such as telecommunications equipment and industrial automation systems.

Diodes 2,622,077

• Bridge Rectifier Diodes

• Current Regulator Diodes

• Diodes & Rectifiers

• Microwave Mixer & Detector Diodes

• Other Function Diodes

• PIN Diodes

• Special Microwave Diodes

• Stabistor Diodes

• Step Recovery Diodes (SRD)

• Transient Suppression Devices

• Varactor Diodes

• Voltage Multipliers

• Zener Diodes

BAW101E6327

Infineon Technologies

Infineon's BAW101E6327 is a rectifier diode with 1us reverse recovery time, 50uA reverse current, and 1.3V forward voltage. It is used in applications requiring a max output current of 0.25A, such as power supplies and battery chargers.

BAT54LP-7

Diodes Incorporated

BAT54LP-7 by Diodes Inc. is a Schottky rectifier diode with 30V max reverse voltage and 0.2A output current. With 0.005us reverse recovery time, it's ideal for applications requiring fast switching like power supplies and signal demodulation in temperature range of -65 to 125°C.

SMF30A-HE3-08

Vishay Intertechnology

Vishay Intertechnology's SMF30A-HE3-08 is a unidirectional Trans Voltage Suppressor Diode with 1000W peak power dissipation, 35.1V breakdown voltage, and 2.5V max forward voltage. Ideal for transient suppression in automotive electronics, industrial equipment, and consumer electronics due to its AEC-Q101 and IEC-61000-4-5 compliance.

M1609NC260

Littelfuse

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

BZX84-C4V7,215

NXP Semiconductors

NXP Semiconductors' BZX84-C4V7,215 Zener Diode has a 4.7V nominal reference voltage with a max reverse current of 3uA. It operates in temperatures ranging from -65 to 150 °C and has a max power dissipation of 0.25W. Ideal for applications requiring precise voltage regulation in compact electronic devices.

SMDJ28A

Yageo

Yageo's SMDJ28A is a single unidirectional transient suppression device with 3000W peak power dissipation and 32.75V breakdown voltage. Ideal for protecting electronic circuits from voltage spikes in applications requiring high reliability, such as industrial automation systems or telecommunications equipment.

BZT52C4V7-13-F

Diodes Incorporated

BZT52C4V7-13-F by Diodes Inc. is a Zener diode with 4.7V nominal voltage, 5mA test current, and 3uA reverse current. Ideal for voltage regulation in electronic circuits due to its small outline package and unidirectional polarity. Operating temperature range from -65°C to 150°C makes it suitable for various applications requiring precise voltage control.

PZU16BL,315

NXP Semiconductors

The NXP Semiconductors PZU16BL,315 is a Zener diode with a 16V nominal reference voltage and 5% max voltage tolerance. It operates at a max temperature of 150°C, has a dynamic impedance of 20 ohm, and can handle up to 0.5W power dissipation. Ideal for applications requiring precise voltage regulation in compact electronic devices.

PKC136-RL

STMicroelectronics

PKC136-RL by STMicroelectronics is a single transient suppression device with a breakdown voltage of 160V. It features an avalanche diode type, unidirectional polarity, and max power dissipation of 1.5W. Ideal for applications requiring protection against voltage transients in electronic circuits.

US1J-13-F

Diodes Incorporated

US1J-13-F by Diodes Inc. is a single rectifier diode with a max reverse recovery time of 0.075 us and a max output current of 1 A. It is designed for efficiency applications, operates b/w -65 to 150 °C, and has a peak reflow temperature of 260 C.

1N4148T50A

National Semiconductor

1N4148T50A by National Semiconductor is a RECTIFIER DIODE with a Max Reverse Recovery Time of 0.004 us and Max Repetitive Peak Reverse Voltage of 100 V. Its GLASS package makes it suitable for high-speed switching applications in electronics. With a low forward voltage of 1 V, it is ideal for circuit protection and signal rectification.

BZX84-C2V4,235

NXP Semiconductors

NXP Semiconductors' BZX84-C2V4,235 Zener Diode has a working test current of 5 mA and max reverse current of 50 uA. It is a unidirectional diode with a nominal reference voltage of 2.4 V, ideal for applications requiring precise voltage regulation in small outline packages.

BZV55-C18

Vishay Intertechnology

Vishay Intertechnology's BZV55-C18 Zener Diode has a nominal reference voltage of 18 V, max power dissipation of 0.4 W, and reverse test voltage of 13 V. Ideal for applications requiring precise voltage regulation in electronic circuits with a working test current of 5 mA and max operating temperature of 200°C.

BAW56W/ZLX

Nexperia

RECTIFIER DIODE; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: TIN;

B320-13-F

Diodes Incorporated

B320-13-F by Diodes Inc. is a Schottky rectifier diode with max forward voltage of 0.5V and output current of 3A, ideal for efficiency applications. Operating temp ranges from -55°C to 150°C, with peak reflow temp at 260°C. Its small outline package makes it suitable for surface mount designs.

SN65220DBVR

Texas Instruments

SN65220DBVR by Texas Instruments is a Transient Suppression Device with a max non-repetitive peak reverse power dissipation of 60W and a max reverse current of 1uA. It is commonly used for voltage suppression in electronic circuits.

BAV21WSR9G

Taiwan Semiconductor

BAV21WSR9G by Taiwan Semiconductor is a single rectifier diode with a max reverse recovery time of 0.05 us and max forward voltage of 1.25 V. It is designed for efficiency applications, operating b/w -65 to 150 °C, with a peak reflow temperature of 260°C.

BZV55-C27,115

NXP Semiconductors

ZENER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

SMAJ12A-13-F

Diodes Incorporated

The Diodes Inc. SMAJ12A-13-F is a unidirectional Trans Voltage Suppressor diode with 14V breakdown voltage, ideal for transient suppression applications. It features a 400W peak reverse power dissipation and 19.9V clamping voltage, suitable for protecting sensitive electronics from voltage spikes in a compact SMD package. Operating temperature range of -55 to 150°C ensures reliable performance in various environments.

BZV49-C13,115

NXP Semiconductors

ZENER DIODE; Terminal Position: SINGLE; Terminal Form: FLAT; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Electronic Components 119,645

• CPU Accelerators/ System Cache Controllers

• Computer Processors

• Graphics Computing Systems

• Motherboards

Fiber Optics 2,921,955

• Fiber Optics - Add Drop Multiplexer Demultiplexer

• Fiber Optics - Amplifiers

• Fiber Optics - Attenuators

• Fiber Optics - Circulator & Isolators

• Fiber Optics - Detectors

• Fiber Optics - Emitters

• Fiber Optics - Filters

• Fiber Optics - Modulators

• Fiber Optics - Other Function

• Fiber Optics - Receivers

• Fiber Optics - Splitter & Couplers

• Fiber Optics - Switches

• Fiber Optics - Transceivers

• Fiber Optics - Transmitters

• Fiber Optics - Wavelength Division Mux & Demux

AFBR-1624Z

Broadcom

Broadcom's AFBR-1624Z is a POF LED transmitter with 0.63mW optical power output, operating at 658nm wavelength. It supports RS-232 and RS-485 communication standards, suitable for digital transmission applications in fiber optics. With a max supply voltage of 3.465V and operating temperature range from -40 to 85°C, it offers reliable performance in various environments.

SFH551/1-1V

Infineon Technologies

SFH551/1-1V by Infineon Technologies is a POF photodiode detector with a 660nm nominal operating wavelength. It has a max supply voltage of 5.25V and built-in amplifier feature. Ideal for digital transmission applications, it can operate in temperatures ranging from -40 to 85°C.

AFBR-710ISMZ

Broadcom

Broadcom AFBR-710ISMZ is a VCSEL transceiver for MMF fiber with LC connector. It operates at 3.3V, -40 to 85°C, supporting GBE communication standard. Ideal for panel mount applications in data centers and networking equipment.

HFBR-1524Z

Broadcom

Broadcom's HFBR-1524Z is a POF LED transmitter with 660nm wavelength, 0.076mW optical power output, and 1Mbps data rate. Ideal for digital transmission applications, it operates b/w -40 to 85°C temperature range using a supply voltage of 1.45-2.02V.

HFBR-2522Z

Broadcom

Broadcom's HFBR-2522Z is a POF fiber optic receiver with 660nm wavelength, 1 Mbps data rate, and DIP package style. Ideal for digital reception applications, it operates b/w 0-70°C temperature range with supply voltage of 4.75-5.25V.

AFBR-1528CZ

Broadcom

TRANSMITTER; Terminal Finish: Tin (Sn); JESD-609 Code: e3;

AFBR-59E4APZ

Broadcom

AFBR-59E4APZ by Broadcom is a Fiber Optics Transceiver with LED and PIN PHOTODIODE. It supports 50/125, 62.5/125 MMF fiber types, operates at 1308 nm wavelength, and has a max supply voltage of 3.6 V. Ideal for applications requiring reliable optical power output in data communication systems.

SFH551/1-1

Infineon Technologies

SFH551/1-1 by Infineon Technologies is a POF photodiode detector with 660nm nominal wavelength, 5V supply voltage, and 85°C max operating temp. Ideal for digital transmission applications, it features a built-in amplifier and through-hole mounting for efficient fiber optics detection.

SP000063814

Broadcom

Broadcom SP000063814 is a Fiber Optics Transmitter with LED emitter, POF fiber type, and 660nm wavelength. It operates b/w -40 to 85 °C and outputs 0.2mW optical power. Ideal for digital transmission applications with through hole mounting feature.

AFBR-5972Z

Broadcom

Broadcom AFBR-5972Z is a 100 Mbps fiber optic transceiver with LED and PIN photodiode. It operates at 650 nm wavelength, suitable for POF fiber type. With a compact body size of 21.45x15.9x11.9 mm, it's ideal for panel mount applications in temperature range -40 to 85 °C.

AFBR-57M5APZ

Broadcom

Broadcom AFBR-57M5APZ is a VCSEL transceiver for MMF fiber with LC connector. It operates at 3.3V, supports GBE communication standard, and has a temperature range of -10 to 85 °C. Ideal for panel mount applications in data centers and networking equipment.

HFBR-1414TZ

Broadcom

Broadcom's HFBR-1414TZ is a LED transmitter for 62.5/125 MMF fiber, with a max supply voltage of 5.25V and nominal optical power output of 0.063mW. Ideal for applications requiring an emitter in the 820nm wavelength range, it features ST connector connection type and operates b/w -40 to 85°C temperatures.

HFBR-1522ETZ

Broadcom

Broadcom's HFBR-1522ETZ is a POF LED transmitter with 660nm wavelength, 0.15mW optical power output, and 1Mbps data rate. Ideal for digital transmission applications, it operates b/w -40 to 85°C temperatures with a supply voltage range of 4.75V to 5.25V.

SP000063858

Broadcom

Broadcom SP000063858 is a LED transmitter for 980/1000 POF fiber, with 0.2398 mW optical power output at 650 nm wavelength. It operates on 5V supply voltage and -40 to 85°C temperature range. Ideal for digital transmission applications requiring reliable fiber optic communication.

FCLF8522P2BTL

Ii-vi

FCLF8522P2BTL by Ii-vi is a Fiber Optics Transceiver with Rx/Tx Data Rate of 1250 Mbps, SFP Connector, and 3.47V Max Supply Voltage. Ideal for high-speed data transmission in networking applications with operating temperatures from -40 to 85°C.

HFBR-1521Z

Broadcom

Broadcom's HFBR-1521Z is a POF LED transmitter with 660nm wavelength, 5 Mbps data rate, and DIP package style. Ideal for digital transmission applications, it operates b/w -40 to 85°C temperatures and requires a supply voltage of 1.45-2.02V.

HFBR-1412Z

Broadcom

Broadcom's HFBR-1412Z is a LED transmitter for fiber optics, operating at 820nm wavelength with 0.2mW optical power output. It supports digital transmission at 5Mbps data rate and can handle up to 5.25V supply voltage. Ideal for applications requiring reliable fiber optic communication in industrial settings.

SFH250V

Infineon Technologies

SFH250V by Infineon Technologies is a POF photodiode detector with 1nA dark current. Operating at 400-1100nm, it supports data rates up to 1100Mbps. Ideal for fiber optics applications, this component has a compact body measuring 2.55mm x 5.5mm x 9mm and can be mounted through holes.

FTLF8524E2GNL

Ii-vi

FTLF8524E2GNL by Ii-vi is a fiber optic transceiver with 4250 Mbps Rx/Tx data rates, LASER emitter, and LC connector. It operates at 845 nm wavelength, suitable for MMF fiber types. Ideal for high-speed data transmission in networking applications.

HFBR-1528Z

Broadcom

Broadcom's HFBR-1528Z is a POF LED transmitter with 650nm wavelength, 10 Mbps data rate, and 0.059 mW optical power output. Ideal for digital transmission applications in fiber optics, it operates at temperatures from -40 to 85 °C and has built-in amplifier features.

Filters 417,945

• Cavity Filters

• Ceramic Filters

• Crystal Filters

• Data Line Filters

• Duplexers

• EMI Mains Filters

• General Purpose Electronic Filters

• Passive Filters

• SAW Filters

• Telecom Filters

• Tubular Filters

• Tunable Filters

HZ1206C202R-10

Laird Technologies

Laird Technologies' HZ1206C202R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 2000 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.5 ohm and rated current of 0.3 A.

BLM31PG601SN1L

Murata Manufacturing

BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.

DLP11TB800UL2L

Murata Manufacturing

Murata Manufacturing's DLP11TB800UL2L is a Data Line Filter with 2 functions, rated at 5V. It offers a max operating temperature of 85°C and min insulation resistance of 100 Mohm. Ideal for applications requiring filtering in data lines with dimensions of L1.25xB1.0xH0.3mm.

1206USB-113MLC

Coilcraft

Coilcraft's 1206USB-113MLC is a data line filter with 2 functions and 4 terminals. It offers attenuation up to 31 dB at 500 MHz, with inductance of 0.623 uH. Ideal for applications requiring high-frequency noise suppression in compact spaces.

BLM18AG102SN1D

Murata Manufacturing

Murata Manufacturing's BLM18AG102SN1D is a chip bead data line filter with 2 terminals, rated for 0.4A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 1000Ω at frequencies up to 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

7427927112

Wurth Elektronik

Wurth Elektronik 7427927112 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.35A. It operates b/w -55 to 125°C, has a DC resistance of 0.35 ohm, and an output impedance of 120Ω. Ideal for surface mount applications in electronics to reduce electromagnetic interference.

ACM1211-102-2PL-TL01

TDK

ACM1211-102-2PL-TL01 by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and insulation resistance of 10 Mohm. It operates b/w -40 to 85 °C and has a DC resistance of 14 ohm. Ideal for applications requiring high output impedance and surface mounting type.

BLM03HG601SN1D

Murata Manufacturing

BLM03HG601SN1D by Murata is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. It offers a DC resistance of 1.6 ohm, output impedance of 600 ohm, and rated current of 0.15 A. Ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.

IP4340CX15/P,135

NXP Semiconductors

NXP Semiconductors' IP4340CX15/P,135 is a 15-terminal data line filter with max operating temp of 85°C and min of -30°C. It is a surface mount device made of plastic, ideal for applications requiring effective filtering in data lines.

DLW43MH201XK2L

Murata Manufacturing

Murata Manufacturing's DLW43MH201XK2L is a data line filter with 200uH inductance and 4.5ohm max DC resistance. It has 2 functions, rated for 20V, and operates b/w -40 to 105°C. Ideal for automotive applications due to AEC-Q200 screening level compliance.

744272471

Wurth Elektronik

Wurth Elektronik 744272471 is a Data Line Filter with UL approval, rated at 80V and inductance of 470uH. It has 2 functions, operates b/w -40 to 125 °C, and offers a max DC resistance of 0.065 ohm. This filter is ideal for applications requiring noise suppression in data lines with a rated current of 1.6A.

BLM18PG471SN1J

Murata Manufacturing

Murata Manufacturing's BLM18PG471SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.2 ohm, and output impedance of 470 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies up to 100 MHz.

0603USB-222MLC

Coilcraft

0603USB-222MLC by Coilcraft is a data line filter with 2 functions and 4 terminals. It offers attenuation of 9.14 dB at min frequency of 100 MHz and 16.53 dB at max frequency of 500 MHz. Ideal for applications requiring surface mount filters in compact dimensions.

4209-053LF

Cts

FEED THROUGH CAPACITOR; Rated Current: 10 A; Additional Features: PI-TYPE CIRCUIT; SILVER PLATED HEX NUT AND INTERNAL TOOTH LOCK WASHER; Rated Voltage: 100 V; Mounting Type: PANEL MOUNT; Capacitance: 5500 uF;

0805USBF-421MRC

Coilcraft

0805USBF-421MRC by Coilcraft is a DATA LINE FILTER with inductance of 0.028uH and max DC resistance of 0.11ohm. AEC-Q200 screened, it operates b/w -40 to 125°C, ideal for automotive applications requiring noise suppression on data lines.

ACM2520-102-2P-T002

TDK

The TDK ACM2520-102-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.2A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers high insulation resistance for data line filtering applications in electronics, operating b/w -40 to 85 °C.

63AYC10B

TE Connectivity

THREE PHASE EMI FILTER; Rated Current: 63 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;

BNX022-01L

Murata Manufacturing

BNX022-01L by Murata Manufacturing is a data line filter with a rated voltage of 50V and attenuation of 35dB at max frequency. It has a compact size of L12.1XB9.1XH3.1 (mm) and is suitable for surface mount applications in various electronic devices.

DFT7160-513BLC

Coilcraft

DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Packing Method: EMBOSSED,PLASTIC, TR, 7 INCH; No. of Functions: 2; Height: 4.9 mm; Length: 7.5 mm;

ACT45B-110-2P-TL003

TDK

The TDK ACT45B-110-2P-TL003 is a FERRITE CHIP filter with 2 functions, rated for 50V and 0.25A. With dimensions of L4.5XB3.2XH2.8 (mm), it offers high insulation resistance suitable for data line applications at temperatures ranging from -40 to 150 °C.

Flash Devices 7,185

• Flash Memory Duplicators

• FlashCard Readers

• SIM Card Readers

• Smart Card Readers

General Purpose ICs 77,282

• Audio & Video Amplifiers

• Audio Control ICs

• Clock ICs

• Color Signal Converters

• Music & Sound Synthesizer ICs

• Noise Reduction ICs

• Other Function Consumer ICs

• Receiver ICs

• Remote Control ICs

• Signal Separator ICs

• Silicon Tuner ICs

• Superimposer Video ICs

• Teletext ICs

• Vertical Deflection ICs

PTN3363BSMP

NXP Semiconductors

PTN3363BSMP by NXP Semiconductors is a 32-terminal consumer IC with operating temperatures from -40 to 105°C. It features a plastic/epoxy body, nickel palladium gold finish, and quad terminal position. Ideal for industrial applications requiring a supply voltage range of 2.8V to 3.6V and peak reflow temperature of 260°C.

MAX9736BETJ+T

Analog Devices

CLASS D AUDIO AMPLIFIER; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;

MICRF113YM6-TR

Microchip Technology

MICRF113YM6-TR by Microchip Technology is a small outline IC with 6 terminals. It operates b/w -40 to 85°C, suitable for industrial applications. With a supply voltage range of 1.8V to 3.6V, it is ideal for consumer circuits requiring compact design and surface mount capability.

FMS6141S5X

Onsemi

FMS6141S5X by Onsemi is a consumer IC with 5V power supply, suitable for industrial applications. It features a small outline package with dual terminals and operates b/w -40 to 85°C. With surface mount capability and nickel palladium gold finish, it offers reliable performance in various electronic circuits.

LA4450L-E

Onsemi

LA4450L-E by Onsemi is an audio amplifier IC with 14 terminals and a power supply of 26.4V. Operating temperature ranges from -35°C to 80°C, making it suitable for commercial extended applications. With a max supply current of 140mA, this bipolar technology chip is ideal for audio and video amplification needs.

MICRF220AYQS

Microchip Technology

MICRF220AYQS by Microchip Technology is a small outline, shrink pitch IC with 16 terminals. It operates in industrial temperature range from -40 to 105°C and requires a supply voltage of 3-3.6V. Ideal for consumer circuits, this rectangular package is surface mountable and has a dual terminal position.

MAX1473EUI+T

Analog Devices

MAX1473EUI+T by Analog Devices is a consumer IC with 28 terminals, operating b/w -40 to 85°C. It has a small outline package style and requires a supply voltage of 3-3.6V. Ideal for industrial applications requiring CMOS technology in compact designs.

TLV320AIC23BRHDR

Texas Instruments

TLV320AIC23BRHDR by Texas Instruments is a consumer IC with 28 terminals in a square package. It operates b/w 0-70°C, with supply voltages of 1.5-3.6V and max current of 26mA. Ideal for applications requiring low power consumption and compact design in consumer electronics.

LM49101TM/NOPB

Texas Instruments

LM49101TM/NOPB by Texas Instruments is a 25-terminal audio control IC with 3 functions. It offers 72 dB channel separation and operates b/w -40 to 85°C. Ideal for volume control circuits in industrial applications, it supports supply voltages of 2.7-5.5V and has a max current draw of 8.35 mA.

ADAU1451WBCPZ

Analog Devices

Analog Devices ADAU1451WBCPZ is a 72-terminal consumer IC with operating temp range -40 to 105°C. It features a supply voltage range of 2.97-3.63V and peak reflow temp of 260°C, suitable for industrial applications requiring high-performance audio processing in compact form factors.

TDA7718NTR

STMicroelectronics

TDA7718NTR by STMicroelectronics is a consumer circuit IC with 28 terminals, operating at -40 to 85°C. It requires power supply of 7.5-10V and has a small outline package suitable for industrial applications like audio systems.

NCS2211DR2G

Onsemi

NCS2211DR2G by Onsemi is an audio amplifier IC with 8 terminals and a small outline package. It operates b/w -40 to 85°C, with a supply voltage range of 2.7V to 5.5V, making it suitable for industrial applications in audio and video amplification systems.

LA72715NV-TLM-E

Onsemi

LA72715NV-TLM-E by Onsemi is a 24-terminal IC with 5V power supply, operating from -20 to 80 °C. Its GULL WING terminals are Tin/Bismuth finished, suitable for consumer circuits in commercial applications. The small outline package is surface mountable and moisture sensitive at MSL level 3.

TAS5424ATDKDQ1

Texas Instruments

TAS5424ATDKDQ1 by Texas Instruments is an audio amplifier IC with 4 channels, 116W output power, and 32dB gain. It operates in industrial temperature range (-40 to 105°C) and supports supply voltage from 8V to 22V. Suitable for automotive applications due to AEC-Q100 screening level and compact package design (15.9mm x 11mm x 3.6mm).

SRC4190IDBR

Texas Instruments

SRC4190IDBR by Texas Instruments is a 28-terminal IC with 3.3V power supply, operating from -40 to 85°C. It features a small outline package suitable for consumer circuits and industrial applications requiring a max supply voltage of 3.6V.

USB3803C-1-GL-TR

Microchip Technology

USB3803C-1-GL-TR by Microchip Technology is a consumer IC with 25 terminals in a square package. It has a very thin profile, fine pitch grid array style and operates b/w 0 to 70°C. Suitable for applications requiring a supply voltage range of 2.9V to 5.5V, such as consumer electronic circuits.

AD9945KCPZRL7

Analog Devices

AD9945KCPZRL7 by Analog Devices is a consumer IC with 32 terminals in a square chip carrier package. It operates b/w -20°C to 85°C, with supply voltage ranging from 2.7V to 3.6V. This IC is suitable for applications requiring very thin profile and heat dissipation, such as consumer electronic circuits.

MAX86141ENP+T

Analog Devices

CONSUMER CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: TIN SILVER COPPER NICKEL; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e2;

MAX98306ETD+T

Analog Devices

Analog Devices' MAX98306ETD+T is a Class D audio amplifier with 2 channels, offering 3.7W nominal output power and 18dB gain. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications in audio and video amplification. The small outline package with a very thin profile and surface mount capability enhances its versatility.

STK415-120-E

Onsemi

STK415-120-E by Onsemi is a 80W, 2-channel audio amplifier with 0.8% harmonic distortion. It has a nominal bandwidth of 0.02 kHz and comes in a rectangular package style for flange mount applications. Ideal for audio and video amplification needs.

I/O & Storage Controllers 9,510

• Hard Drive Adapters

• Management Adapters

• Multiport Serial Adapters

• SCSI/RAID Controllers

• Serial/Parallel Adapters

• Serial/Ultra ATA Controllers

• USB/Firewire Adapters

Inductors 1,317,530

• Fixed Inductors

• Variable Inductors

LPS4018-334MRC

Coilcraft

Coilcraft's LPS4018-334MRC is a shielded, dual-ended fixed inductor with 330uH nominal inductance. Ideal for power applications, it has a max rated current of 0.23A and operates b/w -40 to 125°C. With a compact SMT package size of 3.9x3.9x1.7mm, it features matte tin terminal finish and ferrite core material for general purpose use.

0402HP-47NXJRW

Coilcraft

0402HP-47NXJRW by Coilcraft is a fixed inductor with 0.047uH nominal inductance, 2400MHz self-resonance frequency, and 5% tolerance. Ideal for RF applications due to its dual-ended terminal placement and rectangular package design.

XAL4030-472MEC

Coilcraft

Coilcraft XAL4030-472MEC is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 36MHz.

SRP6060FA-150M

Bourns

Bourns SRP6060FA-150M is a shielded SMT inductor with 15uH nominal inductance, 6A max current, and 155°C max operating temp. Ideal for power applications due to its general purpose design and AEC-Q200 reference standard compliance.

0402DC-39NXGRW

Coilcraft

0402DC-39NXGRW by Coilcraft is a fixed inductor with 0.039 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and DC resistance of 0.375 ohm. This general purpose inductor is surface mountable and features dual-ended terminals.

IHLP5050FDERR47M01

Vishay Dale

GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Tolerance: 20 %;

SRN6045-101M

Bourns

Bourns SRN6045-101M is a shielded, surface mount fixed inductor with 100uH nominal inductance. Ideal for power applications, it has a max rated current of 0.7A and operates b/w -40 to 125°C. With a self-resonance frequency of 5MHz and DC resistance of 0.494 ohm, this general purpose inductor is constructed using ferrite material in a rectangular package measuring 6x6x4.5mm.

XFL3010-333MEC

Coilcraft

Coilcraft XFL3010-333MEC is a shielded, surface mount inductor with 33uH nominal inductance and 1.2 ohm DC resistance. Ideal for power applications, it has a max rated current of 0.56A and operates b/w -40 to 125°C temperatures.

XAL4040-153MEC

Coilcraft

Coilcraft XAL4040-153MEC is a shielded, surface mount fixed inductor with 15uH nominal inductance and 2.8A max rated current. Ideal for power applications, it has a self-resonance frequency of 20MHz and operates b/w -40°C to 125°C.

DR127-150-R

Eaton Corporation

Eaton Corporation's DR127-150-R is a shielded, surface mount fixed inductor with 15uH nominal inductance. It has a max rated current of 5.03A and operates b/w -40 to 125°C, making it ideal for power applications requiring general purpose inductors.

104CDMCCDS-470MC

Sumida

104CDMCCDS-470MC by Sumida is a shielded, surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 47uH and can handle a max rated current of 3.2A. Ideal for power applications, this general purpose inductor operates b/w -55°C to 125°C.

0402HPH-R15XJRW

Coilcraft

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;

1008PS-103KLC

Coilcraft

1008PS-103KLC by Coilcraft is a shielded, dual-ended fixed inductor with 10uH nominal inductance and 0.59A max rated current. Ideal for power applications, this SMT inductor has a Q measured at 1MHz and operates b/w -40 to 105°C.

XAL5030-801MEC

Coilcraft

Coilcraft XAL5030-801MEC is a shielded, surface mount inductor with 0.8uH nominal inductance and 13A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring low DC resistance of 0.00565 ohm and self-resonance frequency of 63MHz.

0402DC-10NXGRW

Coilcraft

0402DC-10NXGRW by Coilcraft is a fixed inductor with 0.01uH nominal inductance, 7390MHz self-resonance frequency, and 1.5A max rated current. Ideal for RF applications due to its rectangular package and dual-ended terminal placement. Suitable for SMT mounting with matte tin finish and AEC-Q200 reference standard compliance.

MLZ2012A3R3WT000

TDK

MLZ2012A3R3WT000 by TDK is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 0.45A max rated current. Ideal for general purpose applications, it operates b/w -55 to 125 °C and features a ferrite core material.

0402HP-1N0XJRW

Coilcraft

0402HP-1N0XJRW by Coilcraft is a fixed inductor with 0.001uH nominal inductance, 2.3A max current, and 16000MHz self-resonance freq. Ideal for RF applications due to its rectangular shape, SMT package style, and dual-ended terminals. Operating temp range -40 to 125 °C with ceramic core material.

0402CS-4N7XGRW

Coilcraft

0402CS-4N7XGRW by Coilcraft is a fixed inductor with 0.0047 uH nominal inductance, suitable for RF applications. With a max rated current of 0.64 A and self-resonance frequency of 4770 MHz, it is ideal for high-frequency circuits. This dual-ended, SMT inductor has a compact 0402 size and operates b/w -40 to 125 °C.

74437324047

Wurth Elektronik

Wurth Elektronik 74437324047 is a shielded fixed inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 2.2A and operates b/w -40 to 125°C. With a self-resonance frequency of 31MHz, it is ideal for general purpose use in SMT packages.

1008CS-102XGRC

Coilcraft

1008CS-102XGRC by Coilcraft is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 1uH, max operating temperature of 125°C, and self-resonance frequency of 290MHz. Ideal for RF applications due to its high quality factor and AEC-Q200 reference standard compliance.

Interface ICs 156,552

• Data Bus Terminators

• Drive Electronics

• Graphics Display Drivers

• Line Drivers & Receivers

• MOSFET Gate Drivers

• Other Function Interface ICs

• Peripheral Drivers

• Voltage Level Translators

MAX232ACSE+

Analog Devices

MAX232ACSE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial temperature grade applications.

PCF85176H/1,518

NXP Semiconductors

PCF85176H/1,518 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It operates at 1.8-5.5V, suitable for industrial applications. With 64 terminals and small outline package style, it offers multiplexed display capability for liquid crystal displays.

LTC2862IS8-2#PBF

Analog Devices

LTC2862IS8-2#PBF by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates b/w -40 to 85 °C, has 8 terminals, and offers differential output. Ideal for industrial applications requiring reliable communication over short distances with low power consumption.

SP330EEY-L/TR

Exar

Exar SP330EEY-L/TR is a 24-terminal line driver/receiver with EIA-485, EIA-422, and EIA-232 interface standards. It operates b/w -40 to 85°C, supporting differential output and input characteristics using a 3.3V nominal voltage. Ideal for industrial applications requiring reliable communication over short distances.

ZXLD1350ET5TA

Diodes Incorporated

ZXLD1350ET5TA by Diodes Inc. is a 5-terminal peripheral driver with a supply voltage range of 7-30V, ideal for industrial applications. It features a small outline package with very thin profile and matte tin terminal finish. With an output current sink direction, it operates b/w -40 to 105°C temperature range.

MAX22164EAEE+

Analog Devices

INTERFACE CIRCUIT;

HV9912NG-G

Microchip Technology

HV9912NG-G by Microchip Technology is a graphics display driver with serial data input mode. It operates b/w -40 to 125 °C and supports a supply voltage range of 9-90 V. Ideal for automotive applications, this LED display driver has a small outline package with 16 terminals and matte tin finish.

PCA9574BS,118

NXP Semiconductors

PCA9574BS,118 by NXP Semiconductors is a CMOS interface IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85 °C with supply voltage range of 1.1V to 3.6V. Ideal for industrial applications requiring very thin profile and surface mount compatibility.

IR2112PBF

Infineon Technologies

IR2112PBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V and operating temperature range from -40 to 125°C. It features a turn-on time of 0.18us, making it suitable for automotive applications requiring high side drivers with a nominal output peak current limit of 0.5A.

HV852K7-G

Microchip Technology

EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;

ACPL-344JT-000E

Broadcom

INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

IR2103STRPBF

Infineon Technologies

IR2103STRPBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V. It is a small outline package with 8 terminals and can operate in temperatures ranging from -40°C to 125°C. This driver is commonly used in automotive applications due to its high side driver capability and CMOS technology.

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

IR2104STRPBF

Infineon Technologies

IR2104STRPBF by Infineon is a MOSFET gate driver with 8 terminals, suitable for automotive applications. It operates at temperatures from -40 to 125°C and has a max supply voltage of 620V. With a turn-on time of 0.82us and turn-off time of 0.22us, it provides precise control in high-side driver configurations.

LED1202JR

STMicroelectronics

LED1202JR by STMicroelectronics is a graphics display driver with 12 segments, operating at a supply voltage range of 2.6V to 5V. It features a serial data input mode and terminal finish of tin silver copper, suitable for industrial applications requiring LED display drivers in compact form factors. With a package style of grid array and very thin profile, this driver offers high performance in a small footprint design.

MAX3430ESA+T

Analog Devices

MAX3430ESA+T by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 8 terminals and offers differential output. Ideal for industrial applications requiring reliable communication over short distances.

UCC37322DGN

Texas Instruments

UCC37322DGN by Texas Instruments is a MOSFET gate driver with a max supply voltage of 15V and output current of 9A. It features a small outline package, totem-pole output characteristics, and BICMOS technology. Ideal for commercial applications requiring fast turn-on/off times in a compact design.

ULN2003ADR2G

Onsemi

ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.

ACNU-3430-500E

Broadcom

ACNU-3430-500E by Broadcom is a MOSFET Gate Driver with 8 terminals, operating voltage range of 15-30V. It features push-pull output, turn-on/off time of 0.15us, and industrial temperature grade. Ideal for applications requiring high-speed switching such as power electronics and motor control systems.

LTC7001EMSE#TRPBF

Analog Devices

LTC7001EMSE#TRPBF by Analog Devices is a MOSFET gate driver with a max supply voltage of 135V and turn-on/off time of 70µs. It is designed for automotive applications, featuring a small outline package style and operating temperature range from -40°C to 125°C. The device utilizes CMOS technology and serves as a buffer or inverter-based MOSFET driver for high side applications.

Logic ICs 653,080

• Bus Driver & Transceivers

• Clock Drivers & Buffers

• Decoder & Drivers

• Delay Lines

• Digital Arithmetic Circuits

• Digital Counters

• Digital Shift Registers

• Latches & Flip-Flops

• Logic Gates

• Multiplexer & Demultiplexer

• Other Function Logic ICs

• Prescaler & Multivibrators

74HCT595D,118

NXP Semiconductors

NXP Semiconductors' 74HCT595D,118 is an 8-bit digital shift register with a supply voltage of 5V and propagation delay of 63ns. Ideal for automotive applications, it features a true output polarity, positive edge trigger type, and operates at frequencies up to 20MHz.

74AUP2GU04GM,115

NXP Semiconductors

INVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR;

PI6CB332001ZXBIEX-13RA

Diodes Incorporated

PI6CB332001ZXBIEX-13RA clock driver by Diodes Inc. features 3 ns propagation delay, 40 true outputs, and 400 MHz min fmax. Ideal for applications requiring differential input conditioning and a nominal voltage of 3.3V, such as high-speed data transmission systems.

NC7SZ125P5

Onsemi

The Onsemi NC7SZ125P5 is a 3-STATE bus driver with 6ns propagation delay, suitable for industrial applications. Operating at 1.8V to 5.5V, it features a load capacitance of 50pF and can handle up to 24A output current. With a compact design and dual terminals, it is ideal for space-constrained systems requiring fast signal transmission.

CD74HCT244E

Texas Instruments

CD74HCT244E by Texas Instruments is a 20-terminal bus driver with 38ns propagation delay at 5V. It features 2 functions, 4 bits, and operates in the temperature range of -55 to 125°C. Ideal for unidirectional applications requiring true output polarity and low enable control.

74AUP2G08GN,115

NXP Semiconductors

AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR;

CD74HCT367E

Texas Instruments

CD74HCT367E by Texas Instruments is a 16-terminal bus driver with 38ns propagation delay at 5V. It features 3-STATE output characteristics and dual terminal position, suitable for military-grade applications requiring unidirectional control. The package style is in-line with a rectangular shape, making it ideal for through-hole technology with a max seated height of 5.08mm.

MM74HCT244WMX

Onsemi

BUS DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;

MC14025BDG

Onsemi

MC14025BDG by Onsemi is a CMOS Logic Gates IC with 3 functions and inputs. It operates at 5V, has a propagation delay of 300ns, and can withstand temperatures from -55 to 125 °C. Ideal for military-grade applications requiring fast signal processing in compact designs.

SN74LVCC3245ADWR

Texas Instruments

SN74LVCC3245ADWR by Texas Instruments is a bus driver with 8-bit translation capability, operating at 3.3V supply voltage. It features a propagation delay of 7.6 ns and supports bidirectional control in industrial applications. With surface mount packaging and 24 terminals, it offers efficient signal transmission with low power consumption.

NC7SZ38L6X

Onsemi

The Onsemi NC7SZ38L6X is a CMOS Logic Gate with 2 inputs, 5.2 ns propagation delay, and 1.8V nominal voltage. Ideal for industrial applications, it features open-drain output characteristics and operates b/w -40 to 85°C temperatures. With a small outline package style, it's suitable for surface mount designs requiring fast signal processing.

SN74LS375N

Texas Instruments

SN74LS375N by Texas Instruments is a TTL latch with 2 bits, 30 ns propagation delay, and 5V nominal voltage. It is used in applications requiring positive edge triggering, such as data storage and transfer systems. The package style is in-line with through-hole terminal form and a max operating temperature of 70°C.

SN74ALS563BN

Texas Instruments

SN74ALS563BN by Texas Instruments is an 8-bit bus driver with a propagation delay of 18 ns at 5V. It features a 3-STATE output and operates within a temperature range of 0 to 70°C. Ideal for applications requiring TTL technology, such as data transmission in commercial-grade environments.

SY75572LMG-TR

Microchip Technology

SY75572LMG-TR by Microchip Tech is a Clock Driver with 3.3V supply, 16 terminals, and 3ns propagation delay. Ideal for industrial applications, it features differential mux input conditioning and 4 true outputs in a square chip carrier package.

NLV74HC165ADTR2G

Onsemi

NLV74HC165ADTR2G by Onsemi is an 8-bit digital shift register with a propagation delay of 225ns. Operating at temperatures from -55 to 125°C, it has a max frequency of 20MHz and requires a supply voltage b/w 2-6V. Ideal for military-grade applications requiring fast data shifting in compact spaces.

SN74AUP2G02DCUR

Texas Instruments

SN74AUP2G02DCUR by Texas Instruments is a logic gate with 2 functions and inputs, operating at 1.2V/3.3V. It has a propagation delay of 25.5ns, suitable for industrial applications requiring fast response times in a compact package style. With a small outline and low power consumption, it is ideal for space-constrained designs needing efficient logic operations.

HEF4011BT,653

NXP Semiconductors

HEF4011BT,653 by NXP Semiconductors is a CMOS Logic Gates IC with 4 functions and 2 inputs. It operates at a supply voltage range of 3-15V, has a propagation delay of 110ns, and can handle load capacitance up to 50pF. Ideal for industrial applications requiring fast signal processing in compact designs.

SN74LS136D

Texas Instruments

SN74LS136D by Texas Instruments is a TTL logic gate with 4 functions and 2 inputs. It has a propagation delay of 30 ns at 5V, making it suitable for fast signal processing applications. With open-collector output characteristics, this IC is ideal for circuits requiring high-speed operation in commercial temperature environments.

CD74HC00M

Texas Instruments

CD74HC00M by Texas Instruments is a CMOS logic gate with 4 functions and 2 inputs. It has a propagation delay of 27 ns at 4.5V, suitable for military-grade applications requiring fast response times. This small outline package with gull wing terminals is ideal for surface mount designs in harsh environments.

PI6CBF18501ZLAIEX

Diodes Incorporated

LOW SKEW CLOCK DRIVER;

Memory 155,302

• Cache Memory

• Memory Cards

• Memory Expansion Boards

• RAM Modules

• ROM Modules

Memory ICs 1,527,471

• DRAM

• EEPROM

• EPROM

• FIFO

• FRAMs

• Flash Memory

• MASK ROM

• MRAMs

• OTP ROM

• Other Function Memory ICs

• SRAM

CY62128ELL-45SXAT

Infineon Technologies

Infineon's CY62128ELL-45SXAT is a 128Kx8 SRAM with 45ns access time, operating at 5V. It features asynchronous mode and 3-STATE output, suitable for industrial applications requiring fast and reliable memory storage in a compact small outline package.

S25FL128SAGMFI001

Infineon Technologies

S25FL128SAGMFI001 by Infineon Technologies is a NOR type flash memory with 32MX4 organization, operating at up to 133 MHz clock frequency. It offers 100000 write/erase cycles and has a memory density of 134217728 bits. Ideal for industrial applications requiring high-speed data storage in compact devices.

71V016SA20BFG

Renesas Electronics

STANDARD SRAM; No. of Terminals: 48; Package Code: LFBGA; Package Shape: SQUARE; Terminal Position: BOTTOM; Width: 7 mm;

MT28EW128ABA1LPC-0SIT

Micron Technology

MT28EW128ABA1LPC-0SIT by Micron Technology is a NOR type Flash Memory with 8Mx16 organization and 8388608 words. It operates at 3V, has a memory density of 134217728 bits, and offers fast access time of 70ns. Ideal for industrial applications requiring high-speed parallel memory with low power consumption.

SFSD4096N1BW1MT-I-DF-111-STD

Swissbit Ag

Swissbit Ag's SFSD4096N1BW1MT-I-DF-111-STD is a 4Gx8 Flash Memory with 34359738368-bit density. Operating at 50MHz clock frequency, it suits industrial applications with -40 to 85°C temp range. This serial memory chip has a compact rectangular shape for surface mount integration.

MT41K128M16JT-125IT:KTR

Micron Technology

Micron Technology's MT41K128M16JT-125IT:KTR is a DDR3L DRAM with 128MX16 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and industrial temperature grade. Suitable for applications requiring high memory density and multi-bank page burst access mode.

CY7C1041DV33-10ZSXI

Cypress Semiconductor

CY7C1041DV33-10ZSXI by Cypress Semiconductor is a 256Kx16 SRAM with 3.3V supply, 10ns access time, and 85°C max temp. Ideal for industrial applications requiring fast, common I/O asynchronous memory in a small outline package.

CY7C1512KV18-333BZXC

Infineon Technologies

QDR II SRAM; Temperature Grade: COMMERCIAL; No. of Terminals: 165; Package Code: LBGA; Package Shape: RECTANGULAR; Maximum Seated Height: 1.4 mm;

SST25VF010A-33-4I-SAE-T

Microchip Technology

SST25VF010A-33-4I-SAE-T by Microchip is a 1Mx1 NOR Flash Memory with SPI serial bus, 33MHz clock frequency, and 3.3V supply voltage. Ideal for industrial applications requiring high endurance, it offers 100000 write/erase cycles and operates in synchronous mode.

M24M02-DRCS6TP/K

STMicroelectronics

STMicroelectronics M24M02-DRCS6TP/K is a 256KX8 EEPROM with 2.5V nominal voltage, I2C serial bus type, and 1MHz clock frequency. Ideal for industrial applications requiring high endurance of 4M cycles, it offers fast write cycle time of 10ms and operates in a wide temperature range from -40 to 85°C.

MB85RS512TPNF-G-JNERE1

Fujitsu

Fujitsu's MB85RS512TPNF-G-JNERE1 FRAM offers 64KX8 organization, operates at 3.3V with 30MHz clock frequency. Ideal for applications requiring high endurance like IoT devices and industrial automation systems due to its 10000000000000 Write/Erase Cycles capability.

M24C02-RMN6P

STMicroelectronics

M24C02-RMN6P by STMicroelectronics is an EEPROM with 256x8 organization, I2C control byte 1010DDDR, and 2048-bit memory density. It operates in synchronous mode at a max clock frequency of 0.4 MHz and has a write protection feature for hardware security. Ideal for industrial applications requiring reliable data storage with up to 1000000 write/erase cycles.

CY7C1041GN30-10BVJXI

Infineon Technologies

Infineon's CY7C1041GN30-10BVJXI is a 256Kx16 SRAM with 10ns access time, operating at 3.6V. It features asynchronous mode, common I/O type, and 3-state output characteristics. Ideal for industrial applications requiring fast memory access in a compact grid array package.

S26KS512SDPBHB020

Infineon Technologies

Infineon's S26KS512SDPBHB020 is a 64MX8 Flash Memory with 536Mbit density. Operating at 1.8V, it offers fast access time of 96ns in industrial temperatures (-40 to 105°C). Ideal for automotive applications due to AEC-Q100 screening and compact GRID ARRAY package.

MT53D512M32D2DS-053AIT:D

Micron Technology

Micron Technology's MT53D512M32D2DS-053AIT:D is a LPDDR4 DRAM with 512MX32 organization, operating at 1.8V. It features a max clock frequency of 1869.1 MHz and supports multi-bank page burst access mode. Ideal for applications requiring high-speed synchronous memory with common I/O type in automotive electronics and industrial devices.

MT25QL128ABA1EW9-0SITTR

Micron Technology

Micron Technology's MT25QL128ABA1EW9-0SITTR is a 128Mbit flash memory with synchronous operation, 133MHz clock frequency, and 100000 write/erase cycles. Ideal for industrial applications requiring high endurance and reliable data storage in a compact package.

SST26VF016BT-104I/SM

Microchip Technology

SST26VF016BT-104I/SM by Microchip: 16MX1 organization, 104 MHz clock frequency, SPI serial bus type. Ideal for industrial applications requiring NOR flash memory with 100000 write/erase cycles endurance and 3.6V max supply voltage.

MT41K512M8DA-107IT:P

Micron Technology

MT41K512M8DA-107IT:P by Micron Technology is a DDR3L DRAM with 512Mx8 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and multi-bank page burst access. Ideal for applications requiring high memory density and fast access times in a compact form factor.

24AA64T-I/OT

Microchip Technology

24AA64T-I/OT by Microchip Tech is an EEPROM with 8KX8 organization, 65536-bit memory density, and 1000000 write/erase cycles. It operates in synchronous mode at 0.4 MHz clock frequency via I2C serial bus. Ideal for industrial applications requiring reliable non-volatile memory storage.

70V24L15PFGI

Renesas Electronics

DUAL-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE; Peak Reflow Temperature (C): 260;

Miscellaneous Components 8,244,104

• Additional Parts

• Reference Design

• Shortage

Optoelectronics 24,698,153

6N136M

Onsemi

6N136M by Onsemi is a single optocoupler with max forward current of 0.025A, min supply voltage of 4.5V, and max operating temp of 70°C. Ideal for logic IC output applications due to its high isolation voltage of 5000V, data rate of 1MBps, and through hole mounting feature.

ALMD-EG3D-WY002

Broadcom

ALMD-EG3D-WY002 by Broadcom is a SINGLE COLOR LED with peak wavelength of 634nm, forward current of 0.05A, and luminous intensity of 8750.0mcd. Ideal for applications requiring a red light source with surface mounting feature and 30deg viewing angle.

D2450-B

Crydom

The Crydom D2450-B is a SINGLE solid state relay with a control current of 0.0034 A and max isolation voltage of 4000 V. It features trigger output SSR optoelectronic type, back to back SCR output circuit, and can handle up to 50 A on-state current. Ideal for DC input applications in various industries due to its compact size (22.9 mm height, 58.4 mm length) and wide operating temperature range (-40°C to 80°C).

LWP4SG-V2AB-JKPL-1

Osram Opto Semiconductors

Osram Opto Semiconductors' LWP4SG-V2AB-JKPL-1 is a 1.6mm single color LED with diffused lens, emitting white light at 1350.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 100°C, making it ideal for surface mount applications requiring high luminous output in a compact size.

HCPL-0531-000E

Broadcom

Broadcom's HCPL-0531-000E is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.025A, operating temp range from -55 to 100°C, and isolation voltage of 3750V. Ideal for logic IC output applications due to its fast response time of 0.000002s and data rate of 1MBps.

5151049F

Dialight

OPTICAL PIPE; Packing Method: BULK;

HEDS-5540#A06

Broadcom

Broadcom's HEDS-5540#A06 is a single optical encoder with 3 channels, operating at max 5.5V. Ideal for rotary position encoding, it has a temp range of -40 to 100°C and mounts via through hole.

TLP265J(T7-TPL,E

Toshiba

Toshiba's TLP265J(T7-TPL,E is a TRIAC output optocoupler with max on-state voltage of 2.8V, peak surge current of 1.2A, and isolation voltage of 3750V. Ideal for triggering devices in applications requiring high voltage protection and surface mounting feature.

DRA1-CXE240D5R

Crydom

The Crydom DRA1-CXE240D5R is a solid state relay with a control current of 0.015 A and max forward current of 5 A. It operates at temperatures ranging from -30 to 80°C, making it suitable for various industrial applications requiring DC input and trigger output SSRs. With a max isolation voltage of 4000 V, this panel-mount relay offers reliable performance in diverse settings.

66400

Micropac Industries

LOGIC IC OUTPUT OPTOCOUPLER; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Minimum Supply Voltage: 2 V;

PVG612PBF

Infineon Technologies

PVG612PBF by Infineon Technologies is a SINGLE solid state relay with 0.005 A control current and 1 A max on-state current. Featuring a MOSFET output circuit type, it offers 4000 V isolation voltage and operates b/w -40 to 85 °C. Ideal for DC input applications, this transistor output SSR has a compact design at 3.4 mm height and 8.6 mm length.

OVS-0803

Spc Technology/ Multicomp

OVS-0803 by Spc Technology/Multicomp is a 1.4mm BLUE LED with WATER CLEAR lens. It has a max forward current of 0.03A and viewing angle of 130°, suitable for SURFACE MOUNT applications in electronics due to its compact size and high luminous intensity of 100.0mcd.

HCPL4503TSVM

Onsemi

HCPL4503TSVM by Onsemi is a single optocoupler with a max forward current of 0.025A and an isolation voltage of 5000V. It operates b/w 0-70 °C, suitable for logic IC output applications at a data rate of 1MBps. Ideal for surface mounting with matte tin finish in tube packaging.

L150-4070500600000

Lumileds Holding B V

L150-4070500600000 by Lumileds Holding B V is a 4.56mm SINGLE COLOR LED with 0.8A max forward current and 6.6V max forward voltage. Ideal for surface mount applications, it emits neutral white light at a wide 116° viewing angle, suitable for various lighting solutions.

HCPL-2232#500

Broadcom

Broadcom's HCPL-2232#500 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.01A, isolation voltage of 3750V, and data rate of 5MBps. Ideal for logic IC output applications, it operates b/w -40 to 85°C and features surface mounting.

HLMP-1790-A00A2

Broadcom

Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.

ACPL-064L-500E

Broadcom

Broadcom's ACPL-064L-500E is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.008A, operating temperature up to 105°C, and isolation voltage of 3750V. Ideal for logic IC output applications requiring fast response time and high power dissipation in surface mount setups.

D1D20

Crydom

The Crydom D1D20 is a single configuration solid state relay with a control current of 0.0016 A and max forward current of 0.028 A. It has a MOSFET output circuit type and can operate at temperatures ranging from -20 to 80 °C. This SSR is commonly used in DC input applications requiring up to 20 A on-state current.

PVA3054NSPBF

Infineon Technologies

PVA3054NSPBF by Infineon Technologies is a SINGLE MOSFET SSR with 0.005 A control current, 0.025 A max forward current, and 160 ohm max on-state resistance. Ideal for DC input applications requiring high isolation voltage of 4000 V, operating b/w -40 to 85 °C.

SFH6206-2T

Vishay Intertechnology

Vishay Intertechnology's SFH6206-2T is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage up to 5300V. Ideal for applications requiring AC input-transistor output optocouplers like industrial automation and power supplies due to its high collector-emitter breakdown voltage of 70V.

Oscillators 101,040,299

DSC1123CL1-287.0000

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;

FJ2400002

Diodes Incorporated

Diodes Inc. FJ2400002 is a 24MHz LVCMOS XO Clock Oscillator with 3.3V supply, 15pF load, and 4 terminals. It has fast rise time of 7ms and fall time of 7ns. Ideal for surface mount applications requiring precise timing in compact designs.

DSC1123CE1-270.0000T

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;

DSC1123CI2-322.2650

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Supply Voltage: 3.6 V;

DSC1103CI2-148.5000

Microchip Technology

Microchip's DSC1103CI2-148.5000 XO Clock Oscillator operates at 148.5 MHz with LVDS type, 25% frequency stability, and 100 OHM output load. Ideal for applications requiring precise timing in a compact form factor, it offers a wide operating temperature range of -40 to 85 °C and surface mounting feature.

DSC1123CL1-287.0000T

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 52/48;

DSC1122CI2-155.5200T

Microchip Technology

LVPECL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;

DSC1123CI2-160.0000T

Microchip Technology

Microchip Technology's DSC1123CI2-160.0000T is a 160 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring high-speed and precise timing. Operating voltage range of 2.25V to 3.63V, operating temperature from -40°C to 85°C, and compact dimensions of 3.2mm x 2.5mm x 0.9mm make it ideal for various electronic devices needing reliable clock synchronization.

ASCO-24.000MHZ-EK-T3

Abracon

Abracon's ASCO-24.000MHZ-EK-T3 is a ceramic packaged oscillator with 24 MHz frequency, 3.3V supply voltage, and 8.5 mA current draw. Ideal for applications requiring precise timing at temperatures ranging from -20 to 70°C, such as in telecommunications and industrial automation systems.

DSC1103CE1-266.7000

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4; Physical Dimension: 3.2mm x 2.5mm x 0.85mm;

DSC1123CI1-022.8800

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;

DSC1123CI2-322.2650T

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.6 V; Physical Dimension: 3.2mm x 2.5mm x 0.85mm;

DSC1122CI2-103.1250

Microchip Technology

LVPECL; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel; Nominal Operating Frequency: 103.125 MHz;

DSC1102CI1-135.0000T

Microchip Technology

LVPECL; Mounting Feature: SURFACE MOUNT; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 0.85mm; Minimum Operating Temperature: -40 Cel;

SIT8008BCT12-18S-48.000000

Sitime

LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 1.8 V;

SIT8008BIL11-33S-24.806000

Sitime

LVCMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4; Maximum Supply Voltage: 3.63 V;

DSC1103CI2-103.1250

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: NICKEL PALLADIUM GOLD;

LTC6992IS6-1#TRMPBF

Analog Devices

LTC6992IS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact surface-mount VCO with precise control over frequency modulation.

DSC1123CI3-135.0000T

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: STANDBY; ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TR; Maximum Symmetry (%): 52/48;

TXEABLSANF-24.000000

Taitien Electronics

TXEABLSANF-24.000000 by Taitien Electronics is a TCVCXO Sine Wave Oscillator with 1% Frequency Stability, 24 MHz Nominal Operating Frequency, and 1 PPM/FIRST YEAR Aging. Ideal for applications requiring precise frequency control in compact devices due to its small physical dimensions of 3.2mm x 2.5mm x 0.9mm and surface mounting feature.

Other Function Semiconductors 11,318,258

• Analog Computational

• Analog Waveform Generation

• Automotive ICs

• Motion Control ICs

• Multiplexers & Switches

• Other Function Semiconductors

• Phase Locked Loops (PLL) & Frequency Synthesis Circuits

• Power Management ICs

• Power Supply Modules

• Switching Regulators & Controllers

• Voltage References

PTV12010LAH

Texas Instruments

PTV12010LAH by Texas Instruments is a DC-DC regulated power supply module with adjustable output voltage (0.8V to 1.8V) and high efficiency (85%). It operates in industrial temperature range (-40°C to 85°C) and offers protection against output overcurrent and thermal issues. Ideal for applications requiring a compact, efficient power solution with precise voltage control.

LT8631IFE#PBF

Analog Devices

Analog Devices' LT8631IFE#PBF is a current-mode switching regulator with 2.8A output current, operating at up to 1075kHz frequency. Ideal for automotive applications, it supports input voltages from 3V to 100V and features a compact rectangular package with dual terminals and matte tin finish.

LM2576D2TR4-5G

Onsemi

LM2576D2TR4-5G by Onsemi is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a voltage output range of 4.9V to 5.1V and can handle up to 7.5A output current. Ideal for automotive applications due to its compact size and pulse width modulation control technique.

MAX4659ESA+T

Analog Devices

Analog Devices' MAX4659ESA+T is an 8-terminal SPDT switch with a max on-state resistance of 25 ohm. Operating b/w -40 to 85°C, it has a switching time of 150 ns and offers 70 dB off-state isolation. Ideal for industrial applications requiring fast signal routing in compact spaces.

INA3221AQRGVRQ1

Texas Instruments

INA3221AQRGVRQ1 by Texas Instruments is a Power Management IC with 3 channels. It operates at a nominal voltage of 3.3V and has a temperature range of -40 to 125°C. It is commonly used in automotive applications for power supply support circuitry.

HDR-15-12

Mean Well Enterprises

Mean Well Enterprises' HDR-15-12 power supply module offers adjustable output voltage, 85% efficiency, and overvoltage protection. With a nominal output of 12V, it is ideal for microelectronic assemblies in various applications requiring a reliable and efficient power source.

LM43603PWPT

Texas Instruments

LM43603PWPT by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 28V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and pulse width modulation control technique. Package style: small outline, heat sink/slug, thin profile.

FPF1006

Onsemi

POWER SUPPLY SUPPORT CIRCUIT; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;

MAX16165ATPH+T

Analog Devices

POWER SUPPLY SUPPORT CIRCUIT; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;

LTC2991IMS#TRPBF

Analog Devices

LTC2991IMS#TRPBF by Analog Devices is a Power Management IC with 16 terminals, operating at -40 to 85°C. It supports supply voltages from 2.9V to 5.5V and features a small outline package for industrial applications. The IC provides power supply support circuitry in a compact form factor suitable for surface mount assembly.

HIH-4021-001

Honeywell Sensing And Control

ANALOG CIRCUIT;

MAX4706EXK+T

Analog Devices

Analog Devices' MAX4706EXK+T is a CMOS SPST switch with 3.3V supply, 3 ohm Ron, and 82dB isolation. Ideal for industrial applications, it features a small outline package with dual terminals and operates b/w -40°C to 85°C.

NCP3901FCCT1G

Onsemi

NCP3901FCCT1G by Onsemi is a 28-terminal IC with a supply voltage range of 0-20V. It operates b/w -40 to 125°C, making it suitable for automotive applications. The package style is grid array with very thin profile and fine pitch, ideal for surface mount assembly.

85099

Murrelektronik

AC-DC REGULATED POWER SUPPLY MODULE;

H3LIS331DLTR

STMicroelectronics

H3LIS331DLTR by STMicroelectronics is a square-shaped, surface-mountable sensor with a nominal voltage of 2.5V. It operates in industrial temperature range (-40 to 85°C) and is commonly used in applications requiring precise motion detection and orientation sensing.

UHP-200-5

Mean Well Enterprises

AC-DC POWER FACTOR CORRECTION MODULE; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;

LT1961EMS8E#TRPBF

Analog Devices

LT1961EMS8E#TRPBF by Analog Devices is a switching regulator with 1.5A output current, 1500kHz max switching frequency, and 15V nominal input voltage. Ideal for automotive applications, it operates b/w -40 to +125°C and has a compact square package with dual terminals for easy mounting in tight spaces.

EP5357LUI

Intel

EP5357LUI by Intel is a VOLTAGE-MODE SWITCHING REGULATOR with 16 terminals, operating b/w -40 to 85 °C. It has a BUCK switcher config, handling up to 0.6A output current at 5000 kHz frequency. Ideal for industrial applications requiring compact design and efficient power management.

LM4040CIM3-3.0/NOPB

Texas Instruments

LM4040CIM3-3.0/NOPB by Texas Instruments is a 3V voltage reference IC with ±0.5% max voltage tolerance, operating from -40 to 85°C. It comes in a small outline package with matte tin finish, suitable for industrial applications requiring stable output voltage and low temp coefficient.

CC3-2405SF-E

TDK

TDK's CC3-2405SF-E is a DC-DC regulated power supply module with a nominal input voltage of 24V. It has a max output current of 0.6A and a max total power output of 3W. This module is suitable for applications requiring a stable and adjustable output voltage in the range of 4.75V to 6V.

Passive Component Networks 2,424,243

• Resistor & Capacitor Networks

Peripheral ICs 1,184,087

ZL30253LDF1

Microsemi

MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

PIC12F615-E/MS

Microchip Technology

PIC12F615-E/MS by Microchip is an 8-bit microcontroller with 1024 ROM words and 64 RAM bytes. Operating at a max frequency of 20 MHz, it features 4 ADC channels, BOR, PWM, and USB connectivity. Ideal for automotive applications due to AEC-Q100 screening and wide temperature range from -40°C to 125°C.

DS2408S+T&R

Analog Devices

Analog Devices' DS2408S+T&R is a CMOS technology-based Parallel I/O Port with 8 I/O lines. It operates b/w -40 to 85 °C and supports supply voltage range of 2.8V to 5.25V. Ideal for industrial applications requiring small outline package with dual terminal position.

ATMEGA8A-MU

Microchip Technology

ATMEGA8A-MU by Microchip: 8-bit RISC CPU, 5.5V max supply, 16MHz clock freq. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode support. Features include 1024 bytes RAM, 6-Ch ADCs, and FLASH ROM programmability.

PIC16F1938-I/SO

Microchip Technology

PIC16F1938-I/SO by Microchip Technology is an 8-bit microcontroller with 16384 ROM words and 1024 RAM bytes. It features 11-Ch 10-Bit ADC channels, EUSART, I2C, SPI connectivity, and operates at a max clock frequency of 32 MHz. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.

ATSAMD20E16B-MUT

Microchip Technology

ATSAMD20E16B-MUT by Microchip features 32-bit CPU, 8KB RAM, and 10-Ch 12-Bit ADC. Ideal for industrial applications requiring low power consumption, it offers up to 32MHz clock frequency and SERCOM(4) connectivity. With a wide operating temperature range (-40 to 85 °C), it suits various embedded systems needing high-performance microcontrollers.

LPC812M101JDH20FP

NXP Semiconductors

NXP Semiconductors' LPC812M101JDH20FP is a 32-bit microcontroller with 3.3V power supply, operating at speeds up to 25MHz. Ideal for industrial applications, it features 4096 bytes of RAM, 16384 ROM words, and offers PWM channels for precise control in compact designs.

STM32F100VDT6BTR

STMicroelectronics

STM32F100VDT6BTR by STMicroelectronics is a 32-bit microcontroller with 2.5/3.3 V power supplies, 16-Ch 12-Bit ADC, and 16 timers. Ideal for industrial applications requiring a max clock frequency of 24 MHz, it features connectivity options like I2C(2) and SPI(3), making it versatile for various embedded systems projects.

PIC16F18323-E/SL

Microchip Technology

PIC16F18323-E/SL by Microchip: 8-bit, 32MHz microcontroller with 256B RAM, 2048 ROM words. Ideal for automotive applications, featuring ADC/DAC channels, PWM/Timers, I2C/SPI/USART connectivity in a small outline package.

STM32F030C6T6TR

STMicroelectronics

STM32F030C6T6TR by STMicroelectronics is a 32-bit microcontroller with 48 I/O lines, operating at up to 32 MHz. It features 4096 bytes of RAM, ADC and DMA channels, and Flash ROM programmability. Ideal for industrial applications requiring high-speed processing and low power consumption.

PI7C9X113SLFDEX

Diodes Incorporated

PI7C9X113SLFDEX by Diodes Incorporated is a Bus Controller with 32-bit Address and External Data Bus Width, operating at up to 100 MHz clock frequency. It supports I2C, PCI, SMBUS, and USB bus compatibility for industrial applications requiring high-speed data transfer up to 312.5 MBps. This low-profile package has a max seated height of 1.6 mm and operates within a temperature range of -40°C to +85°C.

ATSAML21E18B-MUT

Microchip Technology

ATSAML21E18B-MUT by Microchip Technology is a 32-bit microcontroller with Cortex-M0+ CPU, 40960 bytes of RAM, and 262144 ROM words. It features 10-Ch 12-Bit ADCs, 2-Ch DACs, and supports up to 16 DMA channels. Ideal for industrial applications requiring low power consumption and connectivity options like USB and SERCOM.

MC908QY2CDTER

NXP Semiconductors

MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;

PIC24HJ128GP504-I/PT

Microchip Technology

Microchip Technology's PIC24HJ128GP504-I/PT is a 16-bit microcontroller with 131072 ROM words and 8192 RAM bytes. It operates at a max clock frequency of 40 MHz, suitable for industrial applications requiring low power mode and analog to digital converters. With connectivity options like I2C, SPI(2), UART(2), it offers versatile peripheral support for various projects.

LAN91C111I-NU

Microchip Technology

LAN91C111I-NU by Microchip Technology is a Serial Communication Controller with 3.63V max supply voltage, 12.5 MBps data transfer rate, and 25 MHz clock frequency. Ideal for industrial applications requiring Ethernet communication, it supports low power mode and has a temperature range of -40 to 85 °C.

PCF8583T/5,518

NXP Semiconductors

NXP Semiconductors' PCF8583T/5,518 is a CMOS timer & real-time clock with I2C interface. It operates b/w -40 to 85°C, has 256 RAM words, and supports interrupt capability. Ideal for applications requiring precise timekeeping in industrial settings due to its small outline package and low power consumption of 0.2 mA at max supply voltage of 6V.

STM32WL55CCU7

STMicroelectronics

MICROCONTROLLER, RISC;

PCA9672BS,118

NXP Semiconductors

NXP Semiconductors' PCA9672BS,118 is an 8-bit parallel I/O port with a supply voltage range of 2.3V to 5.5V. It features a compact square package style suitable for industrial applications, operating b/w -40°C to 85°C. Ideal for general-purpose peripheral IC needs, it offers 8 I/O lines in a small chip carrier form factor with surface-mount capability.

CY8C4125LQI-483T

Infineon Technologies

Multifunction Peripherals; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;

M41T11MH6F

STMicroelectronics

M41T11MH6F by STMicroelectronics is a CMOS timer/real-time clock with I2C access, operating b/w -40 to 85°C. It has a supply voltage range of 3.3-5.5V, 28 terminals in a small outline package suitable for industrial applications requiring accurate timekeeping and scheduling functionalities at up to 0.032 MHz clock frequency.

Programmable ICs 485,636

• Field Programmable Gate Arrays (FPGA)

• Programmable Logic Devices (PLD)

LCMXO3LF-2100E-5MG121C

Lattice Semiconductor

LCMXO3LF-2100E-5MG121C by Lattice Semiconductor is a 264 CLB FPGA with 1.2V nominal voltage, suitable for applications requiring high-density programmable logic solutions. Featuring a grid array package style with 0.5mm terminal pitch, it operates b/w 0 to 85°C and has a compact form factor of 6x6mm.

ATF22LV10CQZ-30JU

Microchip Technology

Microchip Technology's ATF22LV10CQZ-30JU is a 3.3V/5V CMOS PLD with 30ns propagation delay, suitable for industrial applications. Featuring 22 inputs, 10 I/O lines, and 10 outputs, it operates at up to 25MHz clock frequency. The flash-based PAL-type architecture offers versatile programmability in a compact chip carrier package.

MPF300T-1FCVG484E

Microchip Technology

MPF300T-1FCVG484E by Microchip Technology is a CMOS FPGA with 300K logic cells, 284 inputs/outputs, and operates b/w 0-100°C. It features a grid array package with 0.8mm pitch terminals suitable for various applications requiring high-density programmable ICs.

EP3C16E144C8N

Intel

EP3C16E144C8N by Intel is a CMOS FPGA with 15408 logic cells and CLBs. It operates at a max clock frequency of 472.5 MHz, making it suitable for high-speed applications in various industries such as telecommunications, automotive, and aerospace. With a low profile package style and fine pitch terminals, it offers flexibility and reliability in design implementations.

M2S090-FGG676

Microchip Technology

Microchip Technology's M2S090-FGG676 FPGA boasts 86184 logic cells, 425 inputs/outputs, and a max supply voltage of 1.26V. Ideal for applications requiring high-speed processing and programmable logic functions in a compact square grid array package.

10M08SAU169I7P

Intel

The Intel 10M08SAU169I7P is an FPGA with 8000 logic cells, 500 CLBs, and 250 inputs/outputs. It operates at a voltage range of 2.85V to 3.15V and has a temperature range of -40°C to 100°C. This FPGA is ideal for industrial applications requiring high-performance programmable ICs in a compact grid array package.

ICE5LP1K-SG48ITR

Lattice Semiconductor

FIELD PROGRAMMABLE GATE ARRAY; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;

EP2S30F484C5N

Intel

EP2S30F484C5N by Intel is a FPGA with 33880 logic cells, 13552 CLBs, and max clock frequency of 640 MHz. It is ideal for applications requiring high-speed processing and complex logic operations in fields like telecommunications, aerospace, and industrial automation.

XC95144XL-10TQG100I

Xilinx

The Xilinx XC95144XL-10TQG100I is a 144 macrocell FLASH PLD with 81 I/O lines. It operates at a max clock frequency of 138.88 MHz, has propagation delay of 10 ns, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.

XC6SLX45-2CSG324I

Xilinx

The Xilinx XC6SLX45-2CSG324I is a FPGA with 43661 logic cells, 3411 CLBs, and max clock frequency of 667 MHz. It operates at temperatures ranging from -40 to 100 °C and is suitable for industrial applications requiring high-speed processing in compact form factors.

EPM7192SQC160-15N

Intel

The Intel EPM7192SQC160-15N is a 192 macrocell EE PLD with 15ns propagation delay, operating at up to 100MHz. It features in-system programmability, JTAG boundary scan test support, and is ideal for applications requiring high-speed digital logic functions.

XC7S50-L1FGGA484I

Xilinx

Xilinx XC7S50-L1FGGA484I FPGA offers 52160 logic cells, 4075 CLBs, and a max clock frequency of 1098 MHz. Ideal for industrial applications requiring high-speed processing in a compact form factor with a wide operating temperature range from -40 to 100°C.

AGL600V5-FGG144I

Microchip Technology

Microchip Technology's AGL600V5-FGG144I is a CMOS FPGA with 13824 logic cells and 600000 equivalent gates. It operates at a voltage range of 1.425V to 1.575V, suitable for industrial applications requiring high gate count and low power consumption. The package style is grid array, low profile, making it ideal for space-constrained designs needing high performance.

XC2C128-7CPG132I

Xilinx

FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 132; Package Code: TFBGA; Package Shape: SQUARE;

XC7S15-2CSGA225I

Xilinx

Xilinx XC7S15-2CSGA225I FPGA features 12800 logic cells, 1000 CLBs, and a max clock frequency of 1286 MHz. Ideal for industrial applications requiring high-speed processing in a compact form factor with low power consumption. Suitable for surface mount designs with a package style of grid array and fine pitch terminals.

LCMXO2-7000HC-6BG332I

Lattice Semiconductor

LCMXO2-7000HC-6BG332I by Lattice Semiconductor is a Field Programmable Gate Array (FPGA) with 6864 logic cells. It has a max supply voltage of 3.465V and can operate in temperatures ranging from -40°C to 100°C. This FPGA is commonly used for various applications requiring programmable ICs and high-performance logic capabilities.

A42MX16-PLG84M

Microchip Technology

FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: MILITARY; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;

XC9536XL-10VQG44I

Xilinx

Xilinx XC9536XL-10VQG44I is a 36 macrocell FLASH PLD with 34 I/O lines, operating at max 138.88 MHz clock frequency. It features 10 ns propagation delay and supports in-system programmability. Ideal for industrial applications requiring high-speed logic processing within temperature range of -40 to 85°C.

XC3S1400AN-5FGG676C

Xilinx

The Xilinx XC3S1400AN-5FGG676C is a FPGA with 25344 logic cells, 2816 CLBs, and 1400000 equivalent gates. It operates at a max frequency of 770 MHz and has 502 inputs and 408 outputs. Ideal for applications requiring high-speed processing and complex logic functions in electronic systems.

LCMXO2-2000HC-4MG132I

Lattice Semiconductor

LCMXO2-2000HC-4MG132I by Lattice Semiconductor is a 2112 logic cell FPGA with 104 inputs/outputs, operating at max 133 MHz. Suitable for applications requiring high-speed processing and programmable ICs in various industries like telecommunications and consumer electronics.

RF & Microwave 682,871

• Noise Generators

• Other Function RF & Microwave Devices

• RF & Microwave Amplifiers

• RF/Microwave Antennas

• RF/Microwave Attenuators

• RF/Microwave Couplers

• RF/Microwave DC Blocks

• RF/Microwave Detectors

• RF/Microwave Frequency Multipliers

• RF/Microwave Isolator/Circulators

• RF/Microwave Limiters

• RF/Microwave Mixers

• RF/Microwave Modulator/Demodulators

• RF/Microwave Phase Shifters

• RF/Microwave Splitter/Combiners

• RF/Microwave Switches

• RF/Microwave Terminations

• RF/Microwave Up/Down Converters

SKY67151-396LF

Skyworks Solutions

SKY67151-396LF by Skyworks Solutions is a wide band low power RF amplifier with 14.5 dB gain and 21 dBm CW input power. Operating from 700 MHz to 3800 MHz, it's ideal for RF & microwave applications requiring high performance in temperatures ranging from -40°C to 105°C.

HMC465LP5ETR

Analog Devices

Analog Devices' HMC465LP5ETR is a wide band low power RF amplifier with 9.5 dB gain and 50 ohm impedance. It operates from 0 to 20,000 MHz, handles up to 23 dBm CW input power, and has a max temperature range of -40 to +85°C. Ideal for RF and microwave applications requiring high performance in a compact plastic/epoxy package.

LT5534ESC6#TRMPBF

Analog Devices

Analog Devices' LT5534ESC6#TRMPBF is a 50 ohm linear detector with a frequency range of 50-3000 MHz. It operates b/w -40°C to 85°C, making it suitable for RF/microwave applications. The component features matte tin terminal finish and is ideal for detecting signals in various communication systems.

SKY13416-485LF

Skyworks Solutions

SKY13416-485LF by Skyworks Solutions is an RF/Microwave Switch with 1 function. It has a max input power of 37.5 dBm and a max voltage standing wave ratio of 5. This component, with its SP6T configuration, is suitable for applications requiring high-frequency switching in the range of 100 MHz to 6000 MHz.

HMC424ALP3ETR

Analog Devices

HMC424ALP3ETR by Analog Devices is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 1.58 Max VSWR, and -40 to 85 °C Operating Temperature range. Ideal for applications requiring precise signal attenuation in the frequency range of 100 MHz to 13 GHz.

2450AT18A100E

Johanson Technology

2450AT18A100E by Johanson Technology is a RF/Microwave Antenna with 50 ohm impedance, operating from 2400-2500 MHz. It can handle up to 2W power and operates b/w -40°C to 125°C. Ideal for applications requiring high-frequency transmission in various electronic devices.

PE42482A-X

Psemi

PE42482A-X by Psemi is an RF/Microwave Switch with 33 dBm CW power, 1.12 VSWR, and 2.8 dB insertion loss. It's a SP8T device with CMOS technology, operating from 10 MHz to 8000 MHz. Ideal for applications requiring high-frequency switching in compact designs.

MAMX-011054-TR0100

M/a-com Technology Solutions

DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Maximum Voltage Standing Wave Ratio: 1.38; Package Equivalence Code: LCC12,.12SQ,20;

LTC5582IDD#TRPBF

Analog Devices

LTC5582IDD#TRPBF by Analog Devices is a RF/Microwave Detector with a max input power of 24 dBm and operates at frequencies ranging from 40 MHz to 10,000 MHz. It is commonly used in applications requiring linear detection such as wireless communication systems.

HMC637ALP5E

Analog Devices

HMC637ALP5E by Analog Devices is a wide band medium power RF amplifier with a gain of 12 dB. It has a max input power of 25 dBm and operates in temperatures ranging from -40 to 85°C. This component is suitable for applications requiring amplification in the frequency range of 0-6000 MHz.

SKY13355-374LF

Skyworks Solutions

SKY13355-374LF by Skyworks Solutions is an RF/Microwave Switch with max. insertion loss of 0.95 dB, operating freq. range of 100-6000 MHz, and 50 ohm impedance. Ideal for diversity switch applications due to its temp. range of -40 to 85°C and component construction.

ADRF5025BCCZN-R7

Analog Devices

Analog Devices' ADRF5025BCCZN-R7 is a RF/Microwave Switch with max input power of 27.48 dBm, operating freq range from 0.009 MHz to 44000 MHz, and temp range of -40°C to 105°C. Ideal for applications requiring high-frequency signal switching in diverse environments.

HMC930A

Analog Devices

Analog Devices' HMC930A is a wide band medium power RF amplifier with 10 dB gain and 22 dBm max input power. With a VSWR of 7, it operates from -55°C to 85°C, making it suitable for various RF and microwave applications up to 40 GHz.

CMPA2560025F

Wolfspeed

Wolfspeed's CMPA2560025F is a wide band high power RF amplifier module with 19.5 dB gain, operating from 2500 to 6000 MHz. It has a max VSWR of 5 and features a characteristic impedance of 50 ohm. Ideal for applications requiring high power amplification in the RF & Microwave domain.

CMPA0060002F1

Wolfspeed

WIDE BAND HIGH POWER;

MAX2612ETA+T

Analog Devices

WIDE BAND LOW POWER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;

2450AT43B100E

Johanson Technology

2450AT43B100E by Johanson Technology is an RF/Microwave Antenna with Omni-Directional capability and a max transmission power of 2W. It operates b/w 2400-2500 MHz, ideal for Bluetooth/WLAN applications. With a temperature range of -40 to 105°C, it features horizontal/vertical polarization and a characteristic impedance of 50 ohm.

2450AT18B100E

Johanson Dielectrics

2450AT18B100E by Johanson Dielectrics is an RF antenna component with a characteristic impedance of 50 ohm. It operates b/w -40°C to 85°C, covering frequencies from 2400 MHz to 2500 MHz. This antenna is suitable for various RF and microwave applications requiring reliable performance in a wide temperature range.

72-3-34

Api Technologies

FIXED ATTENUATOR; Nominal Attenuation: 3 dB; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Frequency: 4000 MHz; Construction: COAXIAL;

APAKM4012-C2G3D

Abracon

Abracon's APAKM4012-C2G3D is a GPS antenna with RHCP/LHCP polarization, 0.6 dB gain, and operating temperatures from -40°C to 85°C. Ideal for GPS/GALILEO/GLONASS/BEIDOU/SDARS applications due to its RF/Microwave Antenna category and high performance in various weather conditions.

Regulators 1,179,309

TC1014-3.3VCT713

Microchip Technology

Microchip TC1014-3.3VCT713 is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.12A max output current. Operating temperature range from -40 to 125°C makes it suitable for various applications in automotive, industrial, and consumer electronics due to its small form factor and low profile package design.

LM317LMX/NOPB

Texas Instruments

LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.

MIC5365-1.0YMT-TZ

Microchip Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: HSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;

LT3032EDE-5#TRPBF

Analog Devices

LT3032EDE-5#TRPBF by Analog Devices is a fixed mixed multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.27 V, operating temperature range from -40 to 125 °C, and can handle up to 0.15 A output current. Ideal for applications requiring stable power supplies in compact spaces.

REG104FA-5/500

Texas Instruments

The Texas Instruments REG104FA-5/500 is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 5V and a max dropout voltage of 0.5V, making it ideal for applications requiring stable voltage regulation in compact electronic devices.

TPS74201RGWR

Texas Instruments

TPS74201RGWR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.12V, suitable for applications requiring precise voltage regulation in compact spaces. With a package style of chip carrier and very thin profile, it offers high efficiency and low dropout voltage for power-sensitive designs. Operating temperature range from -40 to 125°C makes it ideal for various electronic devices.

TPS79930DDCT

Texas Instruments

TPS79930DDCT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, ideal for surface mount designs.

L78M24CDT-TR

STMicroelectronics

L78M24CDT-TR by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 24V and max output current of 0.5A. Operating temperature ranges from 0 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, terminal finish is matte tin, and it features gull wing terminals for easy surface mounting.

LT1963AEQ-3.3#PBF

Analog Devices

LT1963AEQ-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.5 A. It has a small outline package style, operates in temperatures ranging from -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in electronic circuits.

S-812C33BMC-C4NT2U

Ablic

Ablic's S-812C33BMC-C4NT2U is a CMOS technology LDO regulator with 3.3V output voltage, 0.05A output current, and 1.3mm seated height. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact electronic devices.

LM317HVT/NOPB

Texas Instruments

LM317HVT/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 60V. It has a max output current of 1.5A and can operate at temperatures up to 125°C. This regulator is commonly used in applications requiring adjustable voltage outputs within the specified range.

LP2954AISX/NOPB

Texas Instruments

LP2954AISX/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.25 A and a dropout voltage of 0.8 V. It is commonly used in applications that require stable voltage regulation, such as power supplies and battery-powered devices.

TPS75201QPWPR

Texas Instruments

TPS75201QPWPR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 2A and a min input voltage of 2.7V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style includes small outline, heat sink/slug, thin profile, and shrink pitch features for efficient thermal management and space-saving design.

LM217MDT-TR

STMicroelectronics

LM217MDT-TR by STMicroelectronics is an adjustable positive single output standard regulator with a max output current of 0.5 A and a max load regulation of 4.17%. It operates within a temperature range of -40 to 125 °C and has a max input-output voltage differential of 40 V, making it suitable for various applications requiring precise voltage regulation in compact designs.

MAX5024MASA+

Analog Devices

Analog Devices' MAX5024MASA+ is a BICMOS LDO regulator with 1.5V dropout voltage, 0.15A output current, and 11V max output voltage. It comes in an 8-terminal small outline package suitable for surface mount applications. Ideal for systems requiring stable 5V or adjustable positive voltage outputs in compact designs.

NCP133AMXADJTCG

Onsemi

NCP133AMXADJTCG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.25V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 85°C, making it ideal for various electronic devices where space and thermal management are critical factors. The package style is small outline with very thin profile, ensuring compatibility with surface mount technology for efficient PCB design.

KF80BDT-TR

STMicroelectronics

KF80BDT-TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 8V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.

NCV8720BMT105TBG

Onsemi

Onsemi's NCV8720BMT105TBG is a CMOS LDO regulator with 1.05V output voltage, 0.2V dropout voltage, and 0.35A output current. Ideal for automotive applications due to AEC-Q100 screening and small form factor package design.

NCP699SN30T1G

Onsemi

NCP699SN30T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max dropout voltage of 0.4V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a max output current of 0.15A, this surface-mount device is ideal for electronics that demand low power consumption and precise voltage control.

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Relays 599,304

• DIP & SIP Switches

• Other Function Relays

• Power & Signal Relays

• Radio Frequency Relays

• Reed Relays

• Special Function Relays

• Time Delay Relays

IM42GR

TE Connectivity

IM42GR by TE Connectivity is a DPDT RF relay with 2 FORM C configuration. It has an operate time of 8 ms and electrical life of 100,000 cycles. With a max contact DC power rating of 60W@220VDC, it is ideal for applications requiring high-frequency switching in radio frequency systems.

97C04ST

Grayhill

Grayhill's 97C04ST is a DIP switch with 4 sections, SPST function, and gold terminal finish. With slide actuator type and latched switch action, it operates b/w -40 to 85°C. Ideal for surface mount applications requiring a max contact rating of 0.025A@24VDC.

EV200A1ANA

TE Connectivity

TE Connectivity's EV200A1ANA is a SPST-NO power/signal relay with 500A AC/DC contact current and 900V AC/DC contact voltage. Featuring copper alloy end contacts, it has a coil resistance of 3.14 ohm and operates at a max DC coil voltage of 36V. Ideal for panel mounting applications requiring reliable switching capabilities.

V23086C1001A403-EV-BLBOX

TE Connectivity

POWER/SIGNAL RELAY;

1432871-1

TE Connectivity

POWER/SIGNAL RELAY;

V23079-D2001-B301

Infineon Technologies

V23079-D2001-B301 by Infineon Technologies is a DPDT RF relay with 2 FORM C, operate time of 7ms, and electrical life of 200k cycles. It is ideal for applications requiring momentary relay action in radio frequency circuits up to 900MHz, with a max contact AC rating of 2A@250VAC. The relay features IP67 sealing, gold-plated terminals, and compact dimensions of 15mm x 7.5mm x 9.9mm for efficient panel mounting.

DSP1-DC12V-F

Panasonic

Panasonic's DSP1-DC12V-F is a DPST power/signal relay with 1 FORM A,B. It has an operate time of 10ms and electrical life of 100,000 cycles. With a max contact DC power rating of 150W@125VDC, it is suitable for applications requiring waterproof sealing and momentary relay action.

T9CP1A52-120

TE Connectivity

TE Connectivity's T9CP1A52-120 is a 1 FORM A power/signal relay with 30A max AC contact current and 120V max AC coil voltage. With SILVER CADMIUM OXIDE end contact material, it offers high insulation resistance of 1000000000 ohm. Ideal for panel mounting applications, this relay has a compact body size of 27.4x27.9 mm and operates in temperatures ranging from -40°C to 70°C.

V23026D1022B201X020

TE Connectivity

TE Connectivity V23026D1022B201X020 is a 1 FORM C SPDT relay with 2ms operate time. With 12V nominal coil voltage, it has a max AC contact current of 1A@150VAC. Ideal for power and signal applications, this relay offers momentary action and solder/quick connect termination.

K81AB57

TE Connectivity

TE Connectivity's K81AB57 is a SPST-NO power/signal relay with 1 FORM A configuration. It operates at -55 to 85°C, with 10ms operate/release time and coil resistance of 290Ω. Ideal for applications requiring momentary relay action, it has a max AC contact current of 30A and DC coil voltage of 26.5V.

T9A-P5D52-12

TE Connectivity

TE Connectivity's T9A-P5D52-12 is a SPDT power/signal relay with 15ms operate time and 100000 cycle electrical life. With 20A max AC/DC contact current, it is ideal for applications requiring momentary relay action in dust-proof environments.

V23076-A1001-C133

TE Connectivity

TE Connectivity's V23076-A1001-C133 is a SPDT power/signal relay with 5ms operate time and 200000 cycles electrical life. With a compact size of 26.1mm x 21.1mm x 21.2mm, it is ideal for applications requiring momentary relay action in temperatures ranging from -40°C to 105°C. Operating at a max DC contact voltage of 12V and current of 45A@12VDC, this relay features solder termination and through-hole mounting for efficient installation.

G2RL-1A4-EDC12

Omron

Omron G2RL-1A4-EDC12 is a SPST power/signal relay with 15ms operate time. It has 16A@440VAC max contact AC rating and operates at -40 to 85°C. Ideal for applications requiring momentary relay action in AC/DC circuits.

IMC06CGR

TE Connectivity

TE Connectivity's IMC06CGR is a 1 FORM C SPDT power/signal relay with 8ms operate time and 100000 cycle electrical life. With 60W@220VDC max contact DC power rating, it's ideal for AC/DC supply applications requiring momentary relay action in temperatures ranging from -40 to 85 °C.

3-1393779-7

TE Connectivity

TE Connectivity 3-1393779-7 is a SPDT power/signal relay with 2 FORM C configuration. It has an operate time of 17ms and electrical life of 100,000 cycles. With IP67 sealing, it's ideal for applications requiring momentary relay action in harsh environments.

RTE24012F

TE Connectivity

TE Connectivity's RTE24012F is a DPDT power/signal relay with 2 FORM C configuration. It operates at 15ms, has an electrical life of 30k cycles, and can handle up to 8A@250VAC. Ideal for applications requiring momentary relay action in AC/DC contact or output supply types.

1-1414995-0

TE Connectivity

POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Maximum Operating Temperature: 155 Cel;

KUP-11A15-120

TE Connectivity

TE Connectivity's KUP-11A15-120 is a DPDT relay with 2 FORM C, ideal for power applications. With an operate time of 15ms and electrical life of 10k cycles, it offers reliable performance. Featuring dust-proof sealing, it has a max AC contact rating of 10A@240VAC.

IM13GR

TE Connectivity

TE Connectivity's IM13GR is a DPDT RF relay with 2 FORM C, IP67 sealing, and 100000 cycle electrical life. Ideal for applications requiring MOMENTARY relay action in radio frequency systems operating b/w 100 MHz to 900 MHz. Features include 8 ms operate time, -40 to 85 °C temperature range, and compact dimensions of 10 x 6 x 5.65 mm.

1-1825059-2

TE Connectivity

TE Connectivity 1-1825059-2 is a SPST slide DIP switch with 3 positions. It has a white actuator, polyphenylene sulphide housing, and copper alloy terminals. With an electrical life of 1000 cycles, it is ideal for applications requiring OFF-ON contact function at temperatures ranging from -30 to 85°C.

Resistors 497,085,014

• Fixed Resistors

• Fusible Resistors

• Non-linear Resistors

• Other Function Resistors

• Resistor Networks & Arrays

• Variable Resistors

RC0603FR-0730RL

Yageo

Yageo's RC0603FR-0730RL is a fixed resistor with 30 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and wide operating temperature range from -55°C to 155°C.

CRCW080547R0FKEAC

Vishay Intertechnology

Vishay Intertechnology's CRCW080547R0FKEAC is a 47 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for surface mount applications, it operates b/w -55 to 155 °C, making it suitable for various electronic circuits requiring precise resistance values.

V39CH8T

Littelfuse

V39CH8T by Littelfuse is a VARISTOR with 25V max RMS voltage and 31V operating voltage. With a rated power dissipation of 0.25W, it has a max energy absorption capacity of 1J. Ideal for surge protection in electronic circuits, this SMT varistor operates b/w -40°C to 150°C temperature range.

RC0402JR-075K6L

Yageo

Yageo's RC0402JR-075K6L is a fixed resistor with 5600 ohm resistance, 5% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its metal glaze/thick film technology and temperature coefficient of 100 ppm/°C. Operating range from -55 °C to 155 °C makes it suitable for various electronic devices.

MCS04020C1001FE000

Vishay Intertechnology

Vishay Intertechnology's MCS04020C1001FE000 is a thin film fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and operating temperatures ranging from -55 to 125 °C.

RMCF0805FT100R

Stackpole Electronics

RMCF0805FT100R by Stackpole Electronics is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55°C to 155°C makes it suitable for various environments.

WSL2512R0200FEA

Vishay Intertechnology

Vishay Intertechnology's WSL2512R0200FEA is a fixed resistor with 0.02 ohm resistance, 1% tolerance, and 1W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard, -65 to 170 °C operating temperature range, and compact rectangular package design.

CRCW0603750KFKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW0603750KFKEA is a fixed resistor with 750000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 75 V.

MRS25000C1002FCT00

Vishay Intertechnology

Vishay Intertechnology's MRS25000C1002FCT00 is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.6 W. Ideal for through-hole mounting in applications requiring precise resistance values at temperatures up to 70 °C.

EXB38V472JV

Panasonic

The Panasonic EXB38V472JV is a resistor network with 4 functions, each with a resistance of 4700 ohm and a power dissipation of 0.063 W. It operates b/w -55 to 125 °C and has a tolerance of 5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

CMB02070X4708JB200

Vishay Intertechnology

Vishay Intertechnology's CMB02070X4708JB200 is a 4.7 ohm fixed resistor with carbon film technology, rated for temperatures b/w -55 to 125 °C. It has a power dissipation of 0.4 W and operates at 500 V, suitable for surface mount applications in automotive electronics meeting AEC-Q200 standards.

CRGP2512F6K8

TE Connectivity

TE Connectivity's CRGP2512F6K8 is a 6800 ohm fixed resistor with 1% tolerance. It operates b/w -55°C to 155°C, suitable for automotive applications meeting AEC-Q200 standard. With a rated power of 2W and operating voltage of 500V, it is ideal for surface mount technology in compact designs.

RC0402JR-0710RL

Yageo

Yageo's RC0402JR-0710RL is a 10 ohm fixed resistor with a temperature coefficient of 200 ppm/°C. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

CRCW06031R00FKEAC

Vishay Intertechnology

Vishay Intertechnology's CRCW06031R00FKEAC is a fixed resistor with 1 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

0ZCH0005FF2E

Bel Fuse

Bel Fuse's 0ZCH0005FF2E is a PTC thermistor with dual-ended terminals, matte tin finish, and SMT package style. It operates b/w -40°C to 85°C with a voltage rating of 60V and power dissipation of 0.6W. Ideal for temperature sensing applications, it meets standards like CUL, TUV, and UL.

MF-RX110/72-0

Bourns

Bourns MF-RX110/72-0 is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 72V. It's used for overcurrent protection, has radial terminal placement, and operates b/w -40°C to 85°C.

0603L010YR

Littelfuse

0603L010YR by Littelfuse is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 15V, and dual-ended terminals. Ideal for overcurrent protection in various applications. SMT package style with matte tin finish, suitable for surface mounting type.

WSR3R2000FEA

Vishay Intertechnology

WSR3R2000FEA by Vishay Intertechnology is a fixed resistor with a resistance of 0.2 ohm, rated power dissipation of 3W, and operating voltage of 0.775V. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and temperature coefficient of 75 ppm/°C.

CRCW02014M99FNED

Vishay Intertechnology

Vishay Intertechnology's CRCW02014M99FNED is a fixed resistor with 4990000 ohm resistance, 1% tolerance, and 0.05 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 30 V. With a temperature coefficient of 200 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.

MF-PSHT050KX-2

Bourns

Bourns MF-PSHT050KX-2 is a PTC resettable fuse with resistance of 0.12 ohm, operating voltage of 12V, and temperature range from -40 to 125°C. It features dual-ended terminals in SMT package style for automotive applications meeting AEC-Q200 standards.

Sensors & Transducers 45,888,464

• Image Sensors

• Infrared Sensors

• Linear Position Sensors

• Magnetic Field Sensors

• Other Function Sensors & Transducers

• Pressure Sensors

• Proximity Sensors

• Reflective Object Sensors

• Rotary Position Sensors

• Temperature Sensors

PL-N823-01

KEMET Corporation

INFRARED SENSOR, THERMAL, PYROELECTRIC; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 70 Cel;

AWM3100V

Honeywell Sensing And Control

MASS AIR FLOW SENSOR;

DS1631Z+T&R

Analog Devices

Analog Devices' DS1631Z+T&R is a 12-bit temperature sensor with 2-wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Ideal for applications requiring digital output and surface mounting features.

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

E2E-X10D1-M1GJ

Omron

PROXIMITY SENSOR,INDUCTIVE;

BNO055

Robert Bosch

BNO055 by Robert Bosch is a 3.8" wide ACCELEROMETER with 28 terminals, operating b/w -40 to 85°C. It offers digital voltage output ranging from 0.5-2V, suitable for surface mount applications in various industries like automotive and robotics.

TLV493DA1B6HTSA2

Infineon Technologies

TLV493DA1B6HTSA2 by Infineon is a magnetic field sensor with 3.5V max supply voltage, 0.40-3.30V output range, and -40 to 125°C operating temp. Ideal for applications requiring Hall effect sensors like automotive, industrial, and consumer electronics due to its I2C interface and surface mounting feature.

MAX6625RMTT+T

Analog Devices

Analog Devices' MAX6625RMTT+T is a 9-bit temperature sensor with 3-5.5V supply, -40 to 85 °C operating range, and ±2°C accuracy. Ideal for applications requiring digital output and serial interface in compact surface-mount design.

ACS718KMATR-20B-T

Allegro MicroSystems

Allegro MicroSystems' ACS718KMATR-20B-T is a magnetic field sensor with 16 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. Ideal for applications requiring precise Hall effect sensing in temperatures ranging from -40°C to 125°C.

E2E-X14MD1-M1GJ

Omron

PROXIMITY SENSOR,INDUCTIVE;

175

Bourns

LINEAR POSITION SENSOR,POTENTIOMETRIC,WIRE WOUND;

A1262LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1262LLHLX-T is a magnetic field sensor with 24V max supply, 3.4mT hysteresis, and -40 to 150°C operating temp. Ideal for voltage output applications requiring precise magnetic field detection in compact spaces.

LM35DH/NOPB

Texas Instruments

LM35DH/NOPB by Texas Instruments is a temperature sensor with a voltage output. It operates b/w 0-70°C, with linearity of 0.20°C and positive temperature coefficient. With a supply voltage range of 4-30V, it is ideal for applications requiring precise temperature monitoring in various industries.

FS1012-1100-NG

Renesas Electronics

The Renesas Electronics FS1012-1100-NG is a MASS AIR FLOW SENSOR with 6 terminals, voltage output ranging from 30-60mV. It operates b/w 0-85°C, with supply voltage of 3-5V. Ideal for board mounting applications due to its rectangular shape and dimensions of 7.1" x 28.8mm x 23mm.

HEL-705-T-1-12-00

Honeywell Sensing And Control

HEL-705-T-1-12-00 by Honeywell is a 2-WIRE RTD TEMPERATURE SENSOR with 100 ohm Nominal R0. It has a compact CYLINDRICAL design, 4.75mm height, and 2.18mm diameter for precise temperature measurement applications requiring low operating current of 2 mA.

ADT7420UCPZ-RL7

Analog Devices

ADT7420UCPZ-RL7 by Analog Devices is a temperature sensor with 16-bit resolution. It operates at a voltage range of 2.7V to 5.5V and has an accuracy of 0.66°C. This sensor is commonly used in applications that require precise temperature monitoring, such as industrial automation and HVAC systems.

LF2005-S

Lem International Sa

Other Sensors/Transducers;

MT9P401I12STC-DP

Onsemi

The Onsemi MT9P401I12STC-DP is a 2.2x2.2 um CMOS image sensor with 2592 (H) x 1944 (V) pixels, offering a dynamic range of 70.1 dB and operating at temperatures from -30 to 70 °C. It features a max supply voltage of 1.9 V, operates at a clock speed of 96 MHz, and has an output interface type of 2-WIRE for applications in frame arrays requiring high-resolution imaging at up to 15 fps.

HLSR50-P/SP33

Lem International Sa

Other Sensors/Transducers;

MT9V111IA7ATC-DR

Onsemi

MT9V111IA7ATC-DR by Onsemi is a 640x480 CMOS image sensor with 5.6um pixel size and 60dB dynamic range. Operating at -20 to 60 °C, it has a digital output interface and runs at 15 fps. Ideal for applications requiring high-quality imaging in compact devices.

Storage Drives 94,221

• Flash Drives

• Floppy/Zip Drives

• Hard Drives/Solid State Drives

• Magneto Optical Drives

• REV Drives

Storage Media 3,220

• Floppy/Zip Media

• Magneto Optical Media

• REV Media

• Tape Media

• UDO Media

Storage Systems 44

• Optical Disc Servers

Switches 11,435,345

• Keylock Switches

• Keypad Switches

• Magnetic Reed Switches

• Other Function Switches

• Pushbutton Switches

• Rocker Switches

• Rotary Switches

• Slide Switches

• Snap Action & Limit Switches

• Special Function Switches

• Thumb & Pushwheel Switches

• Toggle Switches

S-1010A

Nidec Copal Electronics

The Nidec Copal Electronics S-1010A is a rotary coded switch with 16 positions and binary coded contact function. It features a gold-plated end contact, copper alloy terminal finish, and polybutylene terephthalate housing material. Ideal for applications requiring a latched switch action, such as in electronic devices operating b/w -40°C to 85°C.

EVPBK4A1B000

Panasonic

Keypad Switches;

D2VW-5L3-1MS

Omron

Omron D2VW-5L3-1MS is a snap action/limit switch with SPDT function. It has an electrical life of 100k cycles, IP67 sealing, and operates b/w -40 to 90°C. With a max AC contact current of 5A@250VAC, it is ideal for panel mounting applications requiring a reliable momentary switch.

V7-1C17D8-207

Honeywell Sensing And Control

Honeywell Sensing And Control's V7-1C17D8-207 is a 10.16" snap action/limit switch with SPDT function, steel roller lever actuator, and 15.1A@277VAC AC rating. Ideal for panel mounting applications requiring momentary switch action and quick connect termination.

35-1

Grayhill

Grayhill 35-1 is a DPST pushbutton switch with 11.1" body width and 12.7mm body length/diameter. It features momentary switch action, wire termination type, and panel mount-threaded mounting feature. Ideal for applications requiring reliable pushbutton switching in industrial control systems.

Z-15GQ22-B

Omron

Omron Z-15GQ22-B is a snap action/limit switch with SPDT function. It has an electrical life of 500K cycles, sealing rating of IP00, and can handle up to 15A@250VAC. With a plunger actuator type and panel mount feature, it's ideal for applications requiring momentary switch action in industrial settings.

R13-509A-05-BB

Multicomp Pro

Special Switches; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Contact Function: OFF-(ON); Length (Actuator): .272 inch;

MS27721-21-1A

Defense Logistics Agency

MS27721-21-1A by Defense Logistics Agency is a DPDT toggle switch with 30000 cycles electrical life. It has a max AC contact current of 5A@115VAC and DC contact current of 5A@28VDC. Ideal for panel mount-threaded applications, this lever actuated switch offers reliable performance in various electronic systems.

E72-40HT

Zf Friedrichshafen Ag

SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER; Maximum Pre Travel: 6.99 mm; Electrical Life: 6000 Cycle(s);

45574

Grayhill

The Grayhill 10-09 pushbutton switch features a black actuator with beryllium copper terminals, offering an electrical life of 100k cycles. With a sealing of epoxy terminal and SPST switch function, it is ideal for applications requiring momentary contact such as control panels or industrial machinery. Operating temperature ranges from -40 to 85°C, making it suitable for various environments.

E79-00A

The Cherry

The Cherry E79-00A is a DPDT snap acting/limit switch with 6000 cycles electrical life. Featuring brass terminals and silver-plated contacts, it operates b/w -40 to 85°C. Ideal for panel mounting applications requiring momentary ON-(ON) contact function at 10A/250VAC power rating.

8801K22

Eaton Corporation

The Eaton Corporation 8801K22 Toggle Switch is a SPST type with a body width of 15.75in and height of 26.42mm. It has a max AC contact current of 10A, DC contact current of 25A, and operates b/w -18°C to 66°C. Ideal for panel mounting applications requiring ON-OFF functionality with latched switch action.

23-4

Grayhill

The Grayhill 23-4 Pushbutton Switch features a black actuator with brass terminals, SPST switch function, and silver-plated contacts. With an electrical life of 100k cycles, it is ideal for applications requiring momentary ON-(OFF) contact function in temperatures ranging from -40 to 85°C. The switch has a max AC voltage of 115V and current rating of 0.25A@115VAC.

DB3C-A1AA

Zf Friedrichshafen Ag

DB3C-A1AA by Zf Friedrichshafen Ag is a SPDT snap action/limit switch with 100000 cycles electrical life. Featuring brass terminals, it has a body width of 6.45 inch and sealing rating of IP50. Ideal for panel mounting applications, it operates b/w -40 to 120 °C with max AC contact current of 10.1A@250VAC.

8500K9

Eaton Corporation

The Eaton Corporation 8500K9 Toggle Switch has an electrical life of 20,000 cycles and is environmentally sealed. With a max operating temperature of 71°C, it is ideal for applications requiring a SPST switch function. This panel mount switch can handle up to 15A@115VAC AC max rating R load and 20A@28VDC DC max rating R load.

7914J-1-000E

Bourns

Bourns 7914J-1-000E is a waterproof keypad switch with stainless steel housing and phosphor bronze terminals. It has SPST switch function, gold-plated contacts, and operates b/w -55°C to 125°C. Ideal for applications requiring snap action contact timing and surface mount installation.

2-1825011-4

TE Connectivity

TE Connectivity 2-1825011-4 is a 4PDT slide switch with 15000 cycles electrical life. It has a body width of 7.35in and actuator travel of 2.794mm, suitable for panel mounting applications. With gold plating on center contacts, it can handle 0.4A AC/DC current at max 20V rating efficiently.

Z-15GW22-B

Omron

Omron Z-15GW22-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With a short hinge roller lever actuator, it is suitable for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 80°C.

Z-15GQ-B

Omron

Omron Z-15GQ-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With IP00 sealing, it's ideal for panel mounting applications requiring a max operating force of 3.43N.

D2HW-A221D

Omron

Omron's D2HW-A221D is a SPDT snap action/limit switch with 100000 cycles electrical life. Featuring IP50 sealing, it has a max operating force of 0.5N and actuator travel of 2.5mm. Ideal for applications requiring momentary switch action, such as in industrial automation systems.

Telecommunications 3,506,672

• ATM/SONET/SDH Circuits

• Analog Data Transmission Interfaces

• Audio Codecs

• Cellphone ICs

• Cordless Phone ICs

• Digital Transmission Controllers

• Digital Transmission Interfaces

• Digital Transmission Support

• Modems

• Network Interfaces

• Other Function Telecom Interface ICs

• Paging ICs

• Telecom - Encryption ICs

• Telecom - Protection ICs

• Telecom - Signaling ICs

• Telecom - Switching ICs

• Telephone Line ICs

HMC749LC3C

Analog Devices

Analog Devices' HMC749LC3C is a telecom IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3.3V. Ideal for telecom circuits, it features gold over nickel terminal finish and is surface mountable for industrial applications.

ADF5904WCCPZ-RL7

Analog Devices

Analog Devices ADF5904WCCPZ-RL7 is a telecom IC with 32 terminals, operating at -40 to 105 °C. It has a supply voltage of 3.3V and MSL level of 3, suitable for industrial applications. The chip carrier package style with matte tin finish is surface mountable and ideal for telecom circuit interfaces.

PE42423B-Z

Psemi

PE42423B-Z by Psemi is a Telecom Interface IC with 16 terminals in a square chip carrier package. Operating temperature ranges from -40 to 125°C, suitable for automotive applications. Features include CMOS technology, 3.3V supply voltage, and compact dimensions of 3x3mm for space-constrained designs.

MAX14950CTO+

Analog Devices

Analog Devices' MAX14950CTO+ is a BICMOS technology chip carrier with 42 terminals, operating at 3.3V. With a peak reflow temp of 260°C, it's ideal for telecom line equalizer applications. This rectangular surface-mount device has a low supply current of 0.41mA and operates b/w 0-70°C.

NLAS7242MUTBG

Onsemi

NLAS7242MUTBG by Onsemi is a telecom IC with 10 terminals in a chip carrier package. Operating from -40 to 85°C, it has a nominal voltage of 3.3V and terminal pitch of 0.4mm. Ideal for telecom circuits, this IC is surface mountable and suited for industrial temperature grades.

FIDO5200BBCZ

Analog Devices

FIDO5200BBCZ by Analog Devices is a telecom IC with 144 terminals in a low-profile grid array package. It operates b/w -40°C to 85°C, suitable for industrial applications. With CMOS technology and a nominal voltage of 1.2V, it's ideal for telecom circuit integration.

SARA-R410M-02B

U-blox Ag

SARA-R410M-02B by U-blox Ag is a CELL IC with RECTANGULAR package, 96 terminals, and operates b/w -20 to 65 °C. It is used for RF and baseband circuits in telecom applications due to its 3.8V supply voltage and compact size of 16x26mm.

LAN8710AI-EZK-ABC

Microchip Technology

LAN8710AI-EZK-ABC by Microchip: Ethernet transceiver with 100 Mbps data rate, operates in -40 to 85 °C range. Features 32 terminals in a square chip carrier package for industrial applications. TS 16949 screening level ensures high quality and reliability.

NEO-M8U-06B

U-blox Ag

NEO-M8U-06B by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and MSL level of 4, suitable for industrial applications requiring precise positioning and timing. The compact rectangular package measures 12.2mm x 16mm with a low seated height of 2.6mm, making it ideal for surface mount designs in automotive or IoT devices.

PM5981B-FEI

Microchip Technology

PM5981B-FEI by Microchip Technology is a GRID ARRAY package with 1932 terminals in PLASTIC/EPOXY material. It is a TELECOM CIRCUIT IC designed for telecom interfaces, featuring surface mount capability and ball-shaped bottom terminals.

SI4461-C2A-GMR

Silicon Labs

TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL;

KSZ8863MLL

Microchip Technology

Microchip Technology's KSZ8863MLL is an Ethernet switch IC with 48 terminals in a square, low-profile package. Operating b/w 0-70°C, it has a supply voltage of 3.3V and matte tin finish. Ideal for telecom applications requiring fine-pitch surface mount components.

ST25R3916-AQWT

STMicroelectronics

RF AND BASEBAND CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

ZL50232QCG1

Microchip Technology

ZL50232QCG1 by Microchip Technology is a digital transmission interface with power supplies of 1.8V and 3.3V, suitable for ISDN echo canceller applications. It features a package style of flatpack, low profile, fine pitch, and operates in industrial temperature grade range from -40°C to 85°C. The terminal finish is matte tin with gull wing form and quad position.

LTC5596IDC#TRMPBF

Analog Devices

LTC5596IDC#TRMPBF by Analog Devices is a Telecom IC with 8 terminals, matte tin finish, and 3.3V supply voltage. It is a small outline package suitable for telecom circuit applications requiring a compact design with a 0.5mm terminal pitch.

KSZ8795CLXCC

Microchip Technology

Microchip Technology's KSZ8795CLXCC is an Ethernet switch IC with 80 terminals in a square package. Operating temperature range of 0-70°C, CMOS technology, and 1.2V supply voltage make it ideal for telecom applications. Package style is flatpack with low profile and fine pitch design.

VSC7428XJG-12

Microchip Technology

VSC7428XJG-12 by Microchip Technology is a telecom switching IC with 1 function. It has a square package and 672 terminals, making it suitable for surface mount applications. With a max operating temperature of 125°C and automotive temperature grade, it is ideal for Ethernet switch applications.

RN4020-V/RM123

Microchip Technology

RN4020-V/RM123 by Microchip Technology is a telecom IC with 24 terminals, operating at 3.3V. It offers a data rate of 1 Mbps and operates b/w -30 to 85°C. Ideal for telecom applications requiring high-speed data transmission in compact designs.

88E1510-A0-NNB2C000

Marvell Technology

Marvell Technology's 88E1510-A0-NNB2C000 is a square-shaped network interface chip carrier with 48 terminals. It operates as an Ethernet transceiver at a nominal voltage of 3.3V, suitable for telecom applications requiring surface mount technology and tin terminal finish.

SC2200A-00A00

Analog Devices

SC2200A-00A00 by Analog Devices is a square-shaped, surface-mount telecom IC with 80 terminals in a quad position. It has a nominal voltage of 1.8V and compact dimensions of 11mm x 11mm x 0.9mm. Ideal for telecom circuits, this chip carrier package features a very thin profile design.

Terminals & Terminal Blocks 1,825,695

• Terminals & Terminal Blocks

190020001

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Wire Cross Section: .8 mm2;

CCS-ZY-2218

Multicomp Pro

BUTT TERMINAL; Wire Gauge: 18 AWG;

AA-2220T

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Wire Cross Section: 1 mm2; Terminal Gender: FEMALE;

3-350566-1

TE Connectivity

PCB TERMINAL; Wire Gauge: 18 AWG; Safety Approval: UL; Terminal Gender: MALE; Wire Cross Section: .9 mm2;

4-520447-2

TE Connectivity

TE Connectivity's 4-520447-2 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire at 600V. With a wire cross section of 5.26 mm2, this FEMALE terminal block is ideal for various electrical applications.

D-436-59

TE Connectivity

WIRE TERMINAL; Wire Gauge: 12 AWG; Wire Cross Section: 2.94 mm2; Safety Approval: UL;

1714575

Phoenix Contact

STRIP TERMINAL BLOCK;

A214107

Eaton Corporation

Eaton Corporation's A214107 is a 7-way barrier strip terminal block with a rated voltage of 300V and current of 30A. It is CSA, CE, IEC, and UL approved for safety. Ideal for board mounting applications with wire gauge support up to 12 AWG.

33469

TE Connectivity

RING TERMINAL; Wire Gauge: 4 AWG; Wire Cross Section: 26.7 mm2; No. of Ways: 1; Safety Approval: UL; Terminal Gender: FEMALE;

2-520129-2

TE Connectivity

TE Connectivity's 2-520129-2 PUSH-ON TERMINAL is UL approved for 600V, 18 AWG wires. With 0.82 mm2 wire cross section, it's ideal for female terminals in various applications.

221-612/K194-4045

Wago

Wago 221-612/K194-4045 is a barrier strip terminal block with 30A current rating and 600V voltage. It supports wire gauge up to 10 AWG and wire cross-section of 6 mm2. Ideal for industrial applications requiring secure connections in limited space.

1010000000

Weidmueller & Kg

1010000000 by Weidmueller & Kg is a MODULAR TERMINAL BLOCK for C RAIL mounting. It has Safety Approvals like ATEX, CSA, DNV and supports wire gauge up to 12 AWG with voltage rating of 800 V. Ideal for applications requiring fastening with SCREW method and accommodating wire cross sections of 4 mm2 in a 2-way configuration.

35108

TE Connectivity

TE Connectivity 35108 is a UL-approved RING TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6.64 mm2, it's ideal for female terminals in various applications.

52430-2

TE Connectivity

TE Connectivity's 52430-2 is a UL-approved FORK TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6 mm2, it is designed for FEMALE terminals in various applications.

503057

Phoenix Contact

MODULAR TERMINAL BLOCK; Mounting Type: G RAIL; Fastening Method: SCREW; Additional Features: CERAMIC; Wire Gauge: 6 AWG; Voltage (Rated): 800 V;

7701

Keystone Electronics

POWER TERMINAL; Wire Gauge: 14 AWG;

190390016

Molex

BULLET TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2.5 mm2; Terminal Gender: FEMALE; Manufacturer Series: 19039;

MSTB2,5/7-ST-5,08

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SCREW; Additional Features: STANDARD: 94V-0, PA; Wire Gauge: 12 AWG; Voltage (Rated): 320 V;

2-180984-0

TE Connectivity

WIRE TERMINAL; Mounting Type: CABLE; Terminal Gender: FEMALE; Safety Approval: UL; No. of Ways: 1;

2-320571-2

TE Connectivity

TE Connectivity 2-320571-2, a UL-approved RING TERMINAL for 16 AWG wire with 300V rating. Ideal for FEMALE terminals in applications requiring 1.42 mm² wire cross section.

Thermal Devices 119,614

• Heat Sinks

• Industrial Fans & Blowers

5656S

Ebm-papst Mulfingen & Kg

5656S by Ebm-papst Mulfingen & Kg is an AC FAN with a max airflow of 138.3 CFM and noise level of 46 dB. It is commonly used in industrial applications for cooling purposes due to its high speed of 2700 rpm and metal body construction.

5114N

Ebm-papst Mulfingen & Kg

5114N by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 147.1 CFM, noise level of 48 dB, and operates at 24V. With a life expectancy of 80000 h, it's ideal for cooling applications in environments with temperatures ranging from -25 to 72 °C.

RL48-19/12

Ebm-papst Mulfingen & Kg

The Ebm-papst Mulfingen & Kg RL48-19/12 is an industrial DC FAN with 16.5 CFM airflow, 4400 rpm speed, and 60000 h life expectancy. Ideal for cooling systems in applications requiring a reliable fan with dimensions of 76x27x76 mm and rated power of 5 W at 12 V.

RLF35-8/12N

Ebm-papst Mulfingen & Kg

RLF35-8/12N by Ebm-papst Mulfingen & Kg is a 12V DC FAN with airflow of 5.65 CFM, operating at 6700 rpm. Ideal for industrial applications, it has CE approval and offers a long life expectancy of 30000 h.

614NGHH

Ebm-papst Mulfingen & Kg

614NGHH by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 33 CFM and noise level of 43 dB. With a rated voltage of 24 V, it operates at speeds up to 6850 rpm. Ideal for applications requiring efficient cooling in limited spaces due to its compact dimensions (60x25x60 mm).

573100D00000G

Boyd

Boyd 573100D00000G Heat Sink has Thermal Resistance of 15Ω, Height 10.16mm, and Width 8mm. Ideal for cooling electronic components in compact spaces like PCBs.

MA2092-HVL.GN

Sunon

The Sunon MA2092-HVL.GN is an industrial AC FAN with a height of 92mm and width of 25mm. It offers an airflow of 54 CFM, operates at a noise level of 32 dB, and has a speed of 3000 rpm. This fan is suitable for applications requiring efficient cooling in compact spaces.

513001B02500G

Aavid Thermalloy

Aavid Thermalloy's 513001B02500G is a black anodized aluminum heat sink with thermal resistance of 13.4 ohm. It features radial fin orientation, measuring 25.4mm in height, 12.7mm in width, and 34.92mm in length. Ideal for cooling electronic components in various applications like computers and power supplies.

OD6025-12HB01A

Knight Electronics

DC FAN;

SF23080A-2083HBL.GN

Sunon

SF23080A-2083HBL.GN by Sunon is an AC FAN with 31 CFM airflow, 36.5 dB noise level, and 2850 rpm speed. Ideal for industrial applications requiring efficient cooling in a compact design.

MF80251V1-1000U-A99

Sunon

Sunon's MF80251V1-1000U-A99 is an 80x25mm DC FAN with 41 CFM airflow, 33 dB noise level, and 3200 rpm speed. Ideal for industrial applications requiring efficient cooling with CE and CUL approvals.

SF23092A-2092HBT.GN

Sunon

AC FAN; Construction: RADIAL; Bearing Type: BALL; Power (Rated): 14.5 W; Voltage (Rated): 240 V; Current (Rated): .07 A;

MA2082-HVL.GN

Sunon

Sunon's MA2082-HVL.GN is an AC FAN with 41 CFM airflow and 33 dB noise level. Ideal for industrial use, it operates at 3300 rpm with a pressure of 3.81 mmH2O, making it suitable for applications requiring efficient cooling in compact spaces.

576802B03100G

Boyd

Boyd 576802B03100G Heat Sink has Thermal Resistance of 27.3 ohm, Height 12.7mm, and Width 14.48mm. Ideal for cooling electronic components in compact spaces due to its small dimensions and efficient heat dissipation capabilities.

ICKS14X14X10

Fischer Elektronik & Kg

ICKS14X14X10 by Fischer Elektronik & Kg is a 10mm adhesive heat sink with thermal resistance of 4.2 ohm. Featuring pin fin orientation, it is made of aluminum and measures 14mm in width and length. Ideal for applications requiring efficient heat dissipation in compact spaces.

9WV1224P1H001

Sanyo Denki America

DC FAN;

4182NX

Ebm-papst Mulfingen & Kg

4182NX by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 105.9 CFM and noise level of 49 dB. With a rated voltage of 24V, it operates at speeds up to 3200 rpm, making it ideal for cooling applications in various industries.

5915PC-12T-B30-A00

Nmb Technologies

The Nmb Technologies 5915PC-12T-B30-A00 is an AC FAN with airflow of 176.5 CFM, noise level of 52 dB, and operates at 115V. Ideal for industrial applications requiring efficient cooling with a life expectancy of 50,000 hours.

MF25101V1-1000U-A99

Sunon

The Sunon MF25101V1-1000U-A99 is an industrial DC FAN with 3.8 CFM airflow, 26 dB noise level, and 14000 rpm speed. Ideal for applications requiring low noise and efficient cooling in compact spaces.

MF40101V1-1000U-G99

Sunon

Sunon's MF40101V1-1000U-G99 is an industrial DC FAN with 8 CFM airflow and 27.3 dB noise level. With CE and CUL approvals, it operates at 7000 rpm, ideal for cooling applications in tight spaces due to its compact size of 40x40x10 mm.

Transformers 108,978

• Audio Transformers

• Autotransformers

• Constant Voltage Transformers

• Current Sense Transformers

• Current Transformers

• IF Transformers

• Inverter Transformers

• Power & Mains Transformers

• Pulse & Datacom Transformers

• RF Transformers

• SMPS Transformers

• Special Function Transformers

• Telecom Transformers

• VARIAC Variable Transformers

CR8420-1000-G

Cr Magnetics

CR8420-1000-G by Cr Magnetics is a BAR PRIMARY current transformer with 3500V isolation voltage. It has a window dimension of D15XH9.2mm and operates b/w 0.02 KHz to 1 KHz frequency range. Ideal for chassis mounting, CE, CUL, UL approved for various applications requiring accurate current measurement in compact spaces.

HX5120NL

Pulse Electronics

HX5120NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. Featuring primary inductance of 350uH, it operates b/w -40 to 85°C. Ideal for surface mount applications, this transformer has dimensions of L16.51xB9.14xH2.08 mm.

ETC1-1-13TR

M/a-com Technology Solutions

ETC1-1-13TR by M/a-com Technology Solutions is a RF Transformer with 0.25W power rating, 3.5dB insertion loss, and 30mA max DC unbalance current. It is used for matching applications in RF circuits, with dimensions of L3.81xB2.79xH2.79mm and operating temperatures ranging from -55 to 85°C.

TG110-S050N2RLTR

Halo Electronics

TG110-S050N2RLTR by Halo Electronics is a Pulse & Datacom Transformer with 2 functions, 1500V isolation voltage, and 1.1dB insertion loss. Ideal for applications such as 10/100 BASE-TX and ATM, this transformer operates b/w temperatures of 0°C to 70°C and has dimensions of L12.7xB7.112xH5.08mm for surface mount installation.

ETH1-230LD

Coilcraft

Coilcraft's ETH1-230LD is a SMPS transformer with 2 primary windings, 350uH inductance, and dimensions of L16.51xB14.73xH7.0 mm. It operates b/w -40 to 85°C and has Tin/Silver/Copper terminal finish. Ideal for surface mount applications in power supplies and converters.

HX2019NLT

Pulse Electronics

HX2019NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 turns ratio, 1500V isolation voltage, and 1.2dB insertion loss. It is designed for 10/100 BASE-TX Ethernet applications, operates b/w -40°C to 85°C, and comes in L12.70xB7.11xH5.97 mm dimensions for surface mount installation.

P0584NL

Pulse Electronics

P0584NL by Pulse Electronics is a pulse transformer used for gate drive applications. It has an isolation voltage of 3000 V, inductance of 450 uH, and operates b/w -40 to 125 °C temperature range.

PM2185.012NLT

Pulse Electronics

TOROIDAL POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200: UL; Center Tap Feature-1: YES; Packing Method: TR, 13 INCH; Minimum Operating Temperature: -40 Cel;

1110

Amecon

TOROIDAL POWER TRANSFORMER; Output Current-1: 1.67 A; Volt-Ampere Rating (VA): 50 VA; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;

1001

Murata Manufacturing

Murata Manufacturing's 1001 is a UL-approved pulse transformer with 2000V isolation voltage, 3000uH inductance, and 200 V-us min ET product. Ideal for datacom applications, it features a compact size of 15.06mm x 15.06mm x 15.75mm and operates b/w temperatures of 0°C to 70°C.

PA1005.125QNLT

Pulse Electronics

CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Load Resistance: 6.5 ohm; Height: 5.5 mm; Primary Current (Peak): 20 A;

HX6096NLT

Pulse Electronics

HX6096NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 turns ratio, UL approved for ETHERNET applications. It offers 1500V isolation voltage, 1.2dB insertion loss, and inductance of 350uH. With dimensions of L18.2xB12.2xH6.6 mm, it operates b/w -40 to 85°C and supports 0.72A output current in TAPE & REEL packing method for surface mount installation.

HM2101NLT

Pulse Electronics

HM2101NLT by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approval. It is ideal for surface mount applications in data communication and pulse transmission systems.

PA1005.020QNLT

Pulse Electronics

PA1005.020QNLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 20A peak primary current and 80uH secondary inductance. AEC-Q200 approved, it operates b/w -40 to 125°C, ideal for automotive applications requiring precise current sensing at frequencies up to 1MHz.

H5007NLT

Pulse Electronics

H5007NLT by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and operates at frequencies up to 100000KHz. Ideal for applications like 1000BASE-T, this transformer comes in compact dimensions of L17.53xB12.2xH5.26mm for surface mount installation.

7440

Api Technologies

7440 by Api Technologies is a Datacom Transformer with 8 functions and an isolation voltage of 1500V. Measuring L1.13XB0.51XH0.3 inches, it is ideal for applications such as 100/1000 BASE-T Ethernet networks due to its surface mounting feature and turns ratio of 1:1.

Q4470-CLD

Coilcraft

Coilcraft's Q4470-CLD is a 0.25 W pulse transformer with 1500 V isolation voltage and 400 uH primary inductance. Ideal for gate drive applications, it operates b/w -40 to 85 °C, has a turns ratio of 1CT:1.3CT, and features surface mounting.

B82804A0474A125

TDK

The TDK B82804A0474A125 is a pulse transformer with inductance of 473uH, suitable for gate drive applications. It has a turns ratio of 2.5:1 and operates b/w -40 to 125°C. With dimensions of 6.7mm x 6.1mm x 5.4mm, it is designed for surface mount installation in various electronic devices.

28-10

Jm Transformer

POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 300 VA; Output Current-1: 10 A;

1105

Amecon

TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 50 VA; Output Current-1: 2.08 A;