Onsemi - CM1624-08DE

STMicroelectronics ECMF02-2AMX6 is a DATA LINE FILTER with 2 functions and 6 terminals. It has approvals from UL and IEC, operates b/w -40 to 85°C, with max DC resistance of 2.5 ohm. This surface mount filter is compact at L1.75xB1.55xH0.55 mm, ideal for data line filtering applications.

BLM21BB201SN1D by Murata is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.26 ohm, and output impedance of 200 ohm at 100 MHz. Widely used in data line applications for noise suppression due to its ferrite material and compact dimensions of L2.0xB1.25xH0.85 mm.

Murata's BLM21BD601SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line filtering. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.35 ohm at 100 MHz frequency. This ferrite chip has dimensions L2.0xB1.25xH0.85 mm and rated current of 0.2 A, suitable for surface mount applications in various electronic devices.

Murata Manufacturing's BLM18BB331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.58Ω. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.4A and is commonly used in electronic devices for noise suppression at frequencies up to 100MHz.

Murata Manufacturing's NFE61PT472C1H9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 4700uF capacitance. It operates b/w -25°C to 85°C and is ideal for surface mount applications requiring noise filtering in data lines.

Wurth Elektronik 74279277 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 70 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in the frequency range of 100-500 MHz.

The TDK MPZ1608S101ATAH0 is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm and a max frequency of 100MHz. Ideal for noise suppression in electronic circuits requiring impedance of 100 ohms at frequencies above 100MHz.

Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.

Murata Manufacturing's NFM41PC155B1E3L is a data line filter with 1500000uF capacitance, 25V rated voltage, and 6A rated current. It is a feed through capacitor used in applications requiring noise suppression and signal filtering in electronic circuits.

The TDK HF70ACC575032-T is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of L5.7xB5.0xH3.2 mm, it offers a max DC resistance of 0.04 ohm and output impedance of 300 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is commonly used in electronic devices requiring noise suppression on data lines.

Wurth Elektronik 744272121 is a Data Line Filter with 2 functions, rated at 80V. It has inductance of 120uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.025 ohm and output impedance of 460Ω.

Murata's DLM11SN900HY2L is a Data Line Filter with 2 functions, rated at 5V. It offers a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring filtering in data lines due to its compact dimensions of L1.25xB1.0xH0.5 mm and surface mounting type.

Wurth Elektronik 742792031 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has an output impedance of 300 OHM. Ideal for data line filtering applications due to its surface mount construction and frequency range of 100-200 MHz.

The Wurth Elektronik 742792655 is a data line filter with a multi-layer construction. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is suitable for applications requiring a frequency range of 100 MHz to 600 MHz.

BLM31AJ601SN1L by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter measures L3.2XB1.6XH1.1 (mm) and is commonly used for impedance matching in electronic circuits.

Wurth Elektronik 744220103 is a Data Line Filter with 2 functions, rated at 80V. It has a max operating temperature of 125°C and DC resistance of 1.2 ohm. Ideal for IEC-approved applications requiring filtering in data lines with surface mounting type.

Yageo's PBY201209T-600Y-N chip bead filter features 2 terminals, matte tin finish, and 60 ohm output impedance. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for data line filtering applications at frequencies ranging from 100 MHz to DC resistance of 0.03 ohm. This surface mount component has a rated current of 3 A and is packed in tape and reel format for easy installation.

Wurth Elektronik 742792515 is a chip bead data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 2 terminals, and measures L4.5XB3.2XH1.5 (mm). Ideal for applications requiring filtering at frequencies ranging from 60 MHz to 100 MHz.

504-6 by West Coast Magnetics is a data line filter with 2 functions and 4 terminals. It has an inductance of 110 uH and max DC resistance of 0.0024 ohm. This surface mount filter is used for noise suppression in data lines.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;