48 Buffer Amplifiers 26

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Nominal Slow Rate	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Output Current	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LMC6009MTX	Texas Instruments	Buffer		Gull Wing	48	TSSOP	Rectangular	Plastic/Epoxy		1.5 μA	Yes	9	CMOS	6 mA		Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP48,.3,20	Buffer Amplifiers		6.5 V	0.02 in (0.5 mm)	75 °C (167 °F)	1.5 uA	-20 °C (-4 °F)		Dual	R-PDSO-G28		0.043 in (1.1 mm)	0.24 in (6.1 mm)							0.492 in (12.5 mm)
THS7327PHP	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS			Tray	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	500 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
THS7347IPHPG4	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS			Tray	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	550 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
THS7327PHPR	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS			Tape And Reel	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	500 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
THS7347IPHPRG4	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS				3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	550 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
THS7347IPHP	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS			Tray	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	550 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
THS7327PHPG4	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS				3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	500 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
THS7347IPHPR	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS			Tape And Reel	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	550 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
LMC6009MT	Texas Instruments	Buffer		Gull Wing	48	TSSOP	Rectangular	Plastic/Epoxy		1.5 μA	Yes	9	CMOS	6 mA		Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP48,.3,20	Buffer Amplifiers		6.5 V	0.02 in (0.5 mm)	75 °C (167 °F)	1.5 uA	-20 °C (-4 °F)		Dual	R-PDSO-G28		0.043 in (1.1 mm)	0.24 in (6.1 mm)							0.492 in (12.5 mm)
THS7327PHPRG4	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy		3.5 uA	Yes	1	CMOS			Tape And Reel	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	500 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
ADD8709WSTZ-REEL	Analog Devices	Buffer	Industrial	Gull Wing	48	LFQFP	Square	Plastic/Epoxy	15 mV	1.5 μA	Yes	18				Tape And Reel	16 V		Flatpack, Low Profile, Fine Pitch		Buffer Amplifiers	6 V/us	18 V	0.02 in (0.5 mm)	105 °C (221 °F)		-40 °C (-40 °F)	Matte Tin	Quad	S-PQFP-G48	3	0.063 in (1.6 mm)	0.276 in (7 mm)	No	150 mA	4.5 MHz	e3		260 °C (500 °F)	0.276 in (7 mm)
ADD8709WSTZ-REEL7	Analog Devices	Buffer	Industrial	Gull Wing	48	LFQFP	Square	Plastic/Epoxy	15 mV	1.5 μA	Yes	18				Tape And Reel, 7 inch	16 V		Flatpack, Low Profile, Fine Pitch		Buffer Amplifiers	6 V/us	18 V	0.02 in (0.5 mm)	105 °C (221 °F)		-40 °C (-40 °F)	Matte Tin	Quad	S-PQFP-G48	3	0.063 in (1.6 mm)	0.276 in (7 mm)	No	150 mA	4.5 MHz	e3			0.276 in (7 mm)
ADD8709ASTZ-REEL	Analog Devices	Buffer	Industrial	Gull Wing	48	LFQFP	Square	Plastic/Epoxy	15 mV	1.5 μA	Yes	18				Tape And Reel	16 V		Flatpack, Low Profile, Fine Pitch		Buffer Amplifiers	6 V/us	18 V	0.02 in (0.5 mm)	100 °C (212 °F)		-40 °C (-40 °F)	Matte Tin	Quad	S-PQFP-G48	3	0.063 in (1.6 mm)	0.276 in (7 mm)	No	150 mA	4.5 MHz	e3			0.276 in (7 mm)
ADD8707ACPZ-REEL7	Analog Devices	Buffer	Industrial	No Lead	48	HVQCCN	Square		15 mV	1.5 μA	Yes	12		15 mA			16 V	16 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC48,.27SQ,20	Buffer Amplifiers	6 V/us	18 V	0.02 in (0.5 mm)	100 °C (212 °F)		-40 °C (-40 °F)		Quad	S-XQCC-N48		0.039 in (1 mm)	0.276 in (7 mm)	No	250 mA	4.5 MHz				0.276 in (7 mm)
ADD8708WCPZ-REEL7	Analog Devices	Buffer	Industrial	No Lead	48	HVQCCN	Rectangular		15 mV	1.5 μA	Yes	18					16 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile			6 V/us	18 V	0.02 in (0.5 mm)	105 °C (221 °F)		-40 °C (-40 °F)	Matte Tin	Quad	R-XQCC-N48	3	0.039 in (1 mm)	0.276 in (7 mm)	No	150 mA	4.5 MHz	e3			0.276 in (7 mm)
ADD8708WSTZ-REEL	Analog Devices	Buffer	Industrial	Gull Wing	48	LFQFP	Rectangular	Plastic/Epoxy	15 mV	1.5 μA	Yes	18				Tape And Reel	16 V		Flatpack, Low Profile, Fine Pitch			6 V/us	18 V	0.02 in (0.5 mm)	105 °C (221 °F)		-40 °C (-40 °F)	Matte Tin	Quad	R-PQFP-G48	3	0.063 in (1.6 mm)	0.276 in (7 mm)	No	150 mA	4.5 MHz	e3			0.276 in (7 mm)
ADD8707WCPZ-REEL7	Analog Devices	Buffer	Industrial	No Lead	48	HVQCCN	Rectangular		15 mV	1.5 μA	Yes	12		15 mA			16 V	16 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC48,.27SQ,20	Buffer Amplifiers	6 V/us	18 V	0.02 in (0.5 mm)	105 °C (221 °F)		-40 °C (-40 °F)		Quad	R-XQCC-N48		0.039 in (1 mm)	0.276 in (7 mm)	No	250 mA	4.5 MHz				0.276 in (7 mm)
ADD8709ASTZ-REEL7	Analog Devices	Buffer	Industrial	Gull Wing	48	LFQFP	Square	Plastic/Epoxy	15 mV	1.5 μA	Yes	18				Tape And Reel, 7 inch	16 V		Flatpack, Low Profile, Fine Pitch		Buffer Amplifiers	6 V/us	18 V	0.02 in (0.5 mm)	100 °C (212 °F)		-40 °C (-40 °F)	Matte Tin	Quad	S-PQFP-G48	3	0.063 in (1.6 mm)	0.276 in (7 mm)	No	150 mA	4.5 MHz	e3			0.276 in (7 mm)
TSL1018IF	STMicroelectronics	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy	12 mV	140 nA	Yes	1			-5 V		5 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1.1 V/us	18 V	0.02 in (0.5 mm)	95 °C (203 °F)		-40 °C (-40 °F)		Quad	S-PQFP-G48		0.047 in (1.2 mm)	0.276 in (7 mm)	No	150 mA	3.5 MHz				0.276 in (7 mm)
TSL1020IFT	STMicroelectronics	Buffer		Gull Wing	48		Square	Plastic/Epoxy			Yes								Flatpack		Buffer Amplifiers								Quad	S-PQFP-G48				No
TSL1014IFT	STMicroelectronics	Buffer	Industrial	Gull Wing	48	LFQFP	Square	Plastic/Epoxy	12 mV	140 nA	Yes	1			-5 V		5 V		Flatpack, Low Profile, Fine Pitch		Buffer Amplifiers	1 V/us	18 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Matte Tin	Quad	S-PQFP-G48	1	0.063 in (1.6 mm)	0.276 in (7 mm)	No	100 mA	2 MHz	e3			0.276 in (7 mm)
TSL1020IF	STMicroelectronics	Buffer		Gull Wing	48		Square	Plastic/Epoxy			Yes								Flatpack		Buffer Amplifiers								Quad	S-PQFP-G48				No
TSL1014IYF	STMicroelectronics	Buffer		Gull Wing	48		Square	Plastic/Epoxy			Yes								Flatpack		Buffer Amplifiers								Quad	S-PQFP-G48				No
TSL1014IYFT	STMicroelectronics	Buffer		Gull Wing	48		Square	Plastic/Epoxy			Yes								Flatpack		Buffer Amplifiers							Nickel PalladiumGold	Quad	S-PQFP-G48	3			No			e4	40 s	260 °C (500 °F)
TSL1014IF	STMicroelectronics	Buffer	Industrial	Gull Wing	48	LFQFP	Square	Plastic/Epoxy	12 mV	140 nA	Yes	1			-5 V		5 V		Flatpack, Low Profile, Fine Pitch		Buffer Amplifiers	1 V/us	18 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Matte Tin	Quad	S-PQFP-G48	1	0.063 in (1.6 mm)	0.276 in (7 mm)	No	100 mA	2 MHz	e3			0.276 in (7 mm)
TSL1018IFT	STMicroelectronics	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy	12 mV	140 nA	Yes	1			-5 V		5 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Buffer Amplifiers	1.1 V/us	18 V	0.02 in (0.5 mm)	95 °C (203 °F)		-40 °C (-40 °F)		Quad	S-PQFP-G48		0.047 in (1.2 mm)	0.276 in (7 mm)	No	150 mA	3.5 MHz				0.276 in (7 mm)

Buffer Amplifiers

Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.

The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.

By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.

Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.