Commercial Buffer Amplifiers 94
| Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Terminal Position | Low-Offset | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
45 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.25 |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin/Lead (Sn85Pb15) |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
275 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.39 in (9.9 mm) |
||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
No |
4 |
CMOS |
-5 V |
5 V |
In-Line |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
66 mA |
275 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Small Outline |
1150 V/us |
Buffer Amplifiers |
1600 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
375 MHz |
e0 |
245 °C (473 °F) |
0.39 in (9.9 mm) |
|||||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
No |
4 |
CMOS |
-5 V |
5 V |
In-Line |
1150 V/us |
Buffer Amplifiers |
1600 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
66 mA |
375 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
Small Outline |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e3 |
0.406 in (10.3 mm) |
||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
No Lead |
DIE |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
Uncased Chip |
Buffer Amplifiers |
300 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Upper |
X-XUUC-N |
1 |
No |
20 mA |
90 MHz |
||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
No |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP16,.3 |
Buffer Amplifiers |
200 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
20 mA |
100 MHz |
e0 |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
No Lead |
8 |
DIE |
Rectangular |
-6 V |
6.5 mV |
4 uA |
Yes |
1 |
Bipolar |
-5 V |
5 V |
Uncased Chip |
650 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Upper |
R-XUUC-N8 |
No |
60 mA |
180 MHz |
e0 |
|||||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
No Lead |
16 |
DIE |
Rectangular |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Uncased Chip |
Buffer Amplifiers |
1600 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Upper |
R-XUUC-N16 |
1 |
No |
66 mA |
375 MHz |
e0 |
|||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Small Outline |
1150 V/us |
Buffer Amplifiers |
1600 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
375 MHz |
e3 |
0.39 in (9.9 mm) |
||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
No |
4 |
CMOS |
45 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP16,.3 |
1150 V/us |
Buffer Amplifiers |
1600 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
66 mA |
375 MHz |
e0 |
245 °C (473 °F) |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e3 |
0.406 in (10.3 mm) |
|||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
No |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP16,.3 |
Buffer Amplifiers |
300 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
20 mA |
90 MHz |
e0 |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
No |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP16,.3 |
Buffer Amplifiers |
200 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
20 mA |
100 MHz |
e0 |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
No Lead |
DIE |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
Uncased Chip |
Buffer Amplifiers |
200 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Upper |
X-XUUC-N |
1 |
No |
20 mA |
100 MHz |
||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
1 |
Bipolar |
-5 V |
5 V |
±5 V |
DIE OR CHIP |
Buffer Amplifiers |
70 °C (158 °F) |
0 °C (32 °F) |
No |
|||||||||||||||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Small Outline |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
275 MHz |
e3 |
0.39 in (9.9 mm) |
||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.406 in (10.3 mm) |
||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-5.5 V |
3 mV |
1 nA |
Yes |
1 |
31 mA |
-5 V |
5 V |
Small Outline |
1000 V/us |
5.5 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin/Lead |
Dual |
R-PDSO-G8 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
950 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
No |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP16,.3 |
Buffer Amplifiers |
300 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
20 mA |
90 MHz |
e0 |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.406 in (10.3 mm) |
||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
6.5 mV |
4 uA |
Yes |
1 |
Bipolar |
43 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
350 V/us |
Buffer Amplifiers |
650 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
2 nA |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
60 mA |
180 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
200 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
100 MHz |
e3 |
0.406 in (10.3 mm) |
|||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Small Outline |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
275 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
200 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
100 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.406 in (10.3 mm) |
||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
No Lead |
16 |
DIE |
Rectangular |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Uncased Chip |
Buffer Amplifiers |
1500 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Upper |
R-XUUC-N16 |
1 |
No |
66 mA |
275 MHz |
e0 |
|||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
Small Outline |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
200 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
100 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
|||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e0 |
0.406 in (10.3 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Small Outline |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
275 MHz |
e0 |
0.39 in (9.9 mm) |
|||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
45 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.25 |
1150 V/us |
Buffer Amplifiers |
1600 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
375 MHz |
e0 |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
6.5 mV |
4 uA |
No |
1 |
Bipolar |
43 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP8,.3 |
350 V/us |
Buffer Amplifiers |
650 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
2 nA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T8 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
60 mA |
180 MHz |
e0 |
0.369 in (9.375 mm) |
|||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
No Lead |
DIE |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
Uncased Chip |
Buffer Amplifiers |
300 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Upper |
X-XUUC-N |
1 |
No |
20 mA |
90 MHz |
||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
|||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
No |
4 |
CMOS |
45 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP16,.3 |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
66 mA |
275 MHz |
e0 |
245 °C (473 °F) |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
-5 V |
5 V |
Small Outline |
1150 V/us |
Buffer Amplifiers |
1600 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
375 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
200 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
100 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.406 in (10.3 mm) |
||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
6.5 mV |
4 uA |
Yes |
1 |
Bipolar |
43 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
350 V/us |
Buffer Amplifiers |
650 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
2 nA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
60 mA |
180 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
6.5 mV |
4 uA |
Yes |
1 |
Bipolar |
43 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
350 V/us |
Buffer Amplifiers |
650 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
2 nA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
60 mA |
180 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
6.5 mV |
4 uA |
Yes |
1 |
Bipolar |
43 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
350 V/us |
Buffer Amplifiers |
650 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
2 nA |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
60 mA |
180 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
Small Outline |
Buffer Amplifiers |
200 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
100 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
200 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
100 MHz |
e0 |
0.406 in (10.3 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
300 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
90 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.406 in (10.3 mm) |
||||||||||||||||||
|
|
Renesas Electronics |
Buffer |
Commercial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
50 uA |
Yes |
1 |
-5 V |
Tube |
5 V |
Small Outline |
Buffer Amplifiers |
1750 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
15 mA |
480 MHz |
e3 |
|||||||||||||||||||||||||||||
|
|
Renesas Electronics |
Buffer |
Commercial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
50 uA |
Yes |
1 |
-5 V |
Tape And Reel |
5 V |
Small Outline |
Buffer Amplifiers |
1750 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
15 mA |
480 MHz |
e3 |
|||||||||||||||||||||||||||||
|
Renesas Electronics |
Buffer |
Commercial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
25 mV |
No |
1 |
Bipolar |
30 mA |
-12 V |
12 V |
±12 V |
In-Line |
DIP8,.3 |
1000 V/us |
Buffer Amplifiers |
0.1 in (2.54 mm) |
70 °C (158 °F) |
35 nA |
0 °C (32 °F) |
Tin/Lead |
Dual |
R-PDIP-T8 |
250 MHz |
e0 |
Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.
The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.
By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.
Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.