Commercial Extended Buffer Amplifiers 14
| Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Terminal Position | Low-Offset | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Renesas Electronics |
Buffer |
Commercial Extended |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-22 V |
30 mV |
10 uA |
Yes |
1 |
Tube |
Small Outline |
Buffer Amplifiers |
0.0013 V/us |
22 V |
0.05 in (1.27 mm) |
75 °C (167 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
110 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||||||||||
|
Intersil |
Buffer |
Commercial Extended |
Through-Hole |
5 |
ZIP |
Rectangular |
Plastic/Epoxy |
-18 V |
50 mV |
No |
1 |
Bipolar |
26 mA |
-15 V |
15 V |
±15 V |
Flange Mount |
ZIP5,.15,.2,67TB |
Buffer Amplifiers |
1500 V/us |
18 V |
0.067 in (1.7 mm) |
75 °C (167 °F) |
35 uA |
0 °C (32 °F) |
Tin/Lead |
Single |
R-PSFM-T5 |
No |
1 A |
55 MHz |
e0 |
|||||||||||||||||||||||||
|
Intersil |
Buffer |
Commercial Extended |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-22 V |
30 mV |
10 uA |
Yes |
1 |
Bipolar |
10 mA |
-12 V |
12 V |
±12/±15 V |
Small Outline |
SOP8,.25 |
1000 V/us |
Buffer Amplifiers |
1300 V/us |
22 V |
0.05 in (1.27 mm) |
75 °C (167 °F) |
7 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
110 MHz |
e0 |
0.193 in (4.9 mm) |
||||||||||||||||||||
|
|
Intersil |
Buffer |
Commercial Extended |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-22 V |
30 mV |
10 uA |
No |
1 |
Bipolar |
10 mA |
-12 V |
12 V |
±12/±15 V |
In-Line |
DIP8,.3 |
1 V/us |
Buffer Amplifiers |
1300 V/us |
22 V |
0.1 in (2.54 mm) |
75 °C (167 °F) |
10 uA |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDIP-T8 |
0.21 in (5.33 mm) |
0.3 in (7.62 mm) |
No |
110 MHz |
e3 |
10 s |
260 °C (500 °F) |
0.377 in (9.585 mm) |
||||||||||||||||||
|
Intersil |
Buffer |
Commercial Extended |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-22 V |
30 mV |
10 uA |
Yes |
1 |
Bipolar |
10 mA |
-12 V |
12 V |
±12/±15 V |
Small Outline |
SOP8,.25 |
1000 V/us |
Buffer Amplifiers |
1300 V/us |
22 V |
0.05 in (1.27 mm) |
75 °C (167 °F) |
7 uA |
0 °C (32 °F) |
Tin/Lead |
Dual |
R-PDSO-G8 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
110 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||
|
Intersil |
Buffer |
Commercial Extended |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-22 V |
30 mV |
10 uA |
No |
1 |
Bipolar |
10 mA |
-12 V |
12 V |
±12/±15 V |
In-Line |
DIP8,.3 |
1000 V/us |
Buffer Amplifiers |
1300 V/us |
22 V |
0.1 in (2.54 mm) |
75 °C (167 °F) |
7 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T8 |
0.21 in (5.33 mm) |
0.3 in (7.62 mm) |
No |
110 MHz |
e0 |
0.377 in (9.585 mm) |
|||||||||||||||||||||
|
Intersil |
Buffer |
Commercial Extended |
Wire |
12 |
QIP |
Round |
Metal |
-20 V |
25 mV |
50 uA |
No |
1 |
Bipolar |
30 mA |
-12 V |
12 V |
±12 V |
Cylindrical |
QUAD12,.4SQ |
1000 V/us |
Buffer Amplifiers |
1100 V/us |
20 V |
0.1 in (2.54 mm) |
75 °C (167 °F) |
35 uA |
0 °C (32 °F) |
Tin Lead |
Bottom |
O-MBCY-W12 |
No |
80 mA |
250 MHz |
e0 |
|||||||||||||||||||||||
|
|
Texas Instruments |
Buffer |
Commercial Extended |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Small Outline, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
0.026 in (0.65 mm) |
Dual |
R-PDSO-G16 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
0.197 in (5 mm) |
||||||||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Commercial Extended |
Gull Wing |
28 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
30 mV |
200 pA |
Yes |
10 |
18 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
4.6 V/us |
24 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-25 °C (-13 °F) |
Dual |
R-PDSO-G28 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
1 MHz |
0.382 in (9.7 mm) |
|||||||||||||||||||||||||||||||
|
|
Texas Instruments |
Buffer |
Commercial Extended |
Gull Wing |
20 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
0.026 in (0.65 mm) |
Nickel PalladiumGold |
Dual |
R-PDSO-G20 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.256 in (6.5 mm) |
|||||||||||||||||||||||||||||||||
|
Renesas Electronics |
Buffer |
Commercial Extended |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-20 V |
25 mV |
50 uA |
No |
1 |
Bipolar |
-12 V |
12 V |
In-Line |
Buffer Amplifiers |
0.0011 V/us |
20 V |
0.1 in (2.54 mm) |
75 °C (167 °F) |
0 °C (32 °F) |
Dual |
R-PDIP-T8 |
0.21 in (5.33 mm) |
0.3 in (7.62 mm) |
80 mA |
250 MHz |
0.377 in (9.585 mm) |
||||||||||||||||||||||||||||
|
Renesas Electronics |
Buffer |
Commercial Extended |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-18 V |
50 mV |
No |
1 |
Bipolar |
-15 V |
15 V |
In-Line |
Buffer Amplifiers |
2000 V/us |
18 V |
75 °C (167 °F) |
0 °C (32 °F) |
Dual |
R-PDIP-T8 |
95 mA |
||||||||||||||||||||||||||||||||||
|
|
Renesas Electronics |
Buffer |
Commercial Extended |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
-22 V |
30 mV |
10 uA |
Yes |
1 |
Tube |
Chip Carrier |
Buffer Amplifiers |
0.0013 V/us |
22 V |
0.05 in (1.27 mm) |
75 °C (167 °F) |
0 °C (32 °F) |
Matte Tin |
Quad |
S-PQCC-J20 |
3 |
0.18 in (4.57 mm) |
0.353 in (8.965 mm) |
110 MHz |
e3 |
0.353 in (8.965 mm) |
|||||||||||||||||||||||||||
|
Renesas Electronics |
Buffer |
Commercial Extended |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-18 V |
50 mV |
No |
1 |
Bipolar |
-15 V |
15 V |
In-Line |
Buffer Amplifiers |
2000 V/us |
18 V |
75 °C (167 °F) |
0 °C (32 °F) |
Dual |
R-PDIP-T8 |
95 mA |
Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.
The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.
By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.
Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.