Gull Wing Buffer Amplifiers 671

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Low-Bias	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Architecture	Programmable Power	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Slew Rate	Sub-Category	Nominal Slow Rate	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Frequency Compensation	Minimum Voltage Gain	Minimum Operating Temperature	Terminal Finish	Terminal Position	Low-Offset	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Output Current	Nominal Bandwidth (3dB)	Micropower	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Wideband	Power
MAX4204ESA-T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	10 uA	Yes	2	Bipolar	4 mA	-5 V				5 V	±5 V	Small Outline	SOP8,.25		Buffer Amplifiers	4200 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		720 MHz		e0			0.193 in (4.9 mm)
MAX4202EUK+	Maxim Integrated	Buffer	Industrial	Gull Wing	5	TSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1	Bipolar	4 mA	-5 V				5 V	±5 V	Small Outline, Thin Profile	TSOP5/6,.11,37		Buffer Amplifiers			0.037 in (0.95 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G5	1			No		780 MHz		e3	30 s	260 °C (500 °F)
MAX405CSA-T	Maxim Integrated	Buffer	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		6.5 mV	4 uA	Yes	1	Bipolar	43 mA	-5 V				5 V	±5 V	Small Outline	SOP8,.25	350 V/us	Buffer Amplifiers	650 V/us	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 nA			0 °C (32 °F)	Tin Lead	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	60 mA	180 MHz		e0			0.193 in (4.9 mm)
MAX405CSA+T	Maxim Integrated	Buffer	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		6.5 mV	4 uA	Yes	1	Bipolar	43 mA	-5 V				5 V	±5 V	Small Outline	SOP8,.25	350 V/us	Buffer Amplifiers	650 V/us	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 nA			0 °C (32 °F)	Matte Tin	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	60 mA	180 MHz		e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX4214EUK	Maxim Integrated	Buffer	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy			15 mV	12 uA	Yes	1							5 V		Small Outline, Low Profile, Shrink Pitch			Buffer Amplifiers	600 V/us	12 V	0.037 in (0.95 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)		60 mA	220 MHz		e0			0.114 in (2.9 mm)
MAX468CWE+	Maxim Integrated	Buffer	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	Yes	4	Bipolar	120 mA	-5 V				5 V		Small Outline			Buffer Amplifiers	200 V/us	6 V	0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)	Matte Tin	Dual		R-PDSO-G16	1	0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	20 mA	100 MHz		e3	30 s	260 °C (500 °F)	0.406 in (10.3 mm)
MAX468CWE-T	Maxim Integrated	Buffer	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	Yes	4	Bipolar	120 mA	-5 V				5 V	±5 V	Small Outline	SOP16,.4		Buffer Amplifiers	200 V/us	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	3 uA			0 °C (32 °F)	Tin Lead	Dual		R-PDSO-G16		0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	20 mA	100 MHz		e0			0.406 in (10.3 mm)
MAX4287EUA	Maxim Integrated	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	No	8 mV	35 uA	Yes	2	Bipolar	56 mA	0 V	Voltage Feedback	No		3 V	±1.425/±3.25/2.85/6.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		Operational Amplifiers	350 V/us	6.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		Yes	1000	-40 °C (-40 °F)	Tin Lead	Dual	No	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	106 mA	250 MHz	No	e0			0.118 in (3 mm)	Yes	No
MAX469CWE-T	Maxim Integrated	Buffer	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	Yes	3	Bipolar	100 mA	-5 V				5 V	±5 V	Small Outline	SOP16,.4		Buffer Amplifiers	300 V/us	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	3 uA			0 °C (32 °F)	Tin Lead	Dual		R-PDSO-G16	1	0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	20 mA	90 MHz		e0	20 s	240 °C (464 °F)	0.406 in (10.3 mm)
EL5327CRZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy	-9 V		15 mV	50 nA	Yes	10	CMOS	2.1 mA	-5 V				5 V	5/±5/15 V	Small Outline	TSSOP24,.25	0.9 V/us	Buffer Amplifiers		9 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G24	3	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		2.5 MHz		e3	30 s	260 °C (500 °F)	0.307 in (7.8 mm)
EL5221CY-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	2	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	10 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)			12 MHz					0.118 in (3 mm)
EL5223CR-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	8	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz					0.256 in (6.5 mm)
EL5421TIYZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-9.9 V		13 mV	50 nA	Yes	4			-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	12 V/us	9.9 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)			12 MHz		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
EL5724IREZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	24	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	8	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G24		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.307 in (7.8 mm)
EL5623IRZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy			20 mV	50 nA	Yes	6	CMOS						15 V		Small Outline			Buffer Amplifiers	9 V/us	18 V		85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G16						10 MHz		e3
EL5221CW-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	2	CMOS		-5 V				5 V		Small Outline, Low Profile, Shrink Pitch			Buffer Amplifiers	10 V/us	9 V	0.037 in (0.95 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G6		0.057 in (1.45 mm)	0.063 in (1.6 mm)			12 MHz					0.114 in (2.9 mm)
EL5724IRE-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	24	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	8	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G24		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz					0.307 in (7.8 mm)
HFA1113IBZ	Renesas Electronics	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V			65 uA	Yes	1			-5 V				5 V		Small Outline			Buffer Amplifiers	1900 V/us	6 V		85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G8					50 mA	850 MHz		e3
EL5524IRE	Renesas Electronics	Buffer	Industrial	Gull Wing	14	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	4	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz					0.197 in (5 mm)
EL5221CWZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	2	CMOS		-5 V				5 V		Small Outline, Low Profile, Shrink Pitch			Buffer Amplifiers	10 V/us	9 V	0.037 in (0.95 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G6		0.057 in (1.45 mm)	0.063 in (1.6 mm)			12 MHz					0.114 in (2.9 mm)
EL5327CRZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy	-9 V		15 mV	50 nA	Yes	10	CMOS	2.1 mA	-5 V				5 V	5/±5/15 V	Small Outline	TSSOP24,.25	0.9 V/us	Buffer Amplifiers		9 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G24	3	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		2.5 MHz		e3	30 s	260 °C (500 °F)	0.307 in (7.8 mm)
HA4600CBZ	Renesas Electronics	Buffer	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V			50 uA	Yes	1			-5 V			Tube	5 V		Small Outline			Buffer Amplifiers	1750 V/us	6 V		70 °C (158 °F)				0 °C (32 °F)	Matte Tin	Dual		R-PDSO-G8	1				15 mA	480 MHz		e3
EL5221CYZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	2	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	10 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)			12 MHz					0.118 in (3 mm)
EL5227CR-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-9 V		15 mV	50 nA	Yes	1	CMOS	1.4 mA	-5 V			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP20,.25	0.9 V/us	Buffer Amplifiers	2.2 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA			-40 °C (-40 °F)		Dual		R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)			2.5 MHz					0.256 in (6.5 mm)
EL5724IREZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	24	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	8	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G24		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.307 in (7.8 mm)
EL5223CRZ	Renesas Electronics	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	8	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.256 in (6.5 mm)
EL5329IRZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	28	TSSOP	Rectangular	Plastic/Epoxy			20 mV	50 nA	Yes	10	CMOS						15 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	9 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G28		0.047 in (1.2 mm)	0.173 in (4.4 mm)			10 MHz					0.382 in (9.7 mm)
EL5421CYZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	4	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	10 V/us	9 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		S-PDSO-G10		0.043 in (1.1 mm)	0.118 in (3 mm)			12 MHz		e3			0.118 in (3 mm)
EL5129IREZ	Renesas Electronics	Buffer	Industrial	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	50 nA	Yes	6	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	9 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)			10 MHz					0.256 in (6.5 mm)
EL5824IRE-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	10	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G28		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz					0.382 in (9.7 mm)
HFA1412IB	Renesas Electronics	Buffer	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-5.5 V			25 uA	Yes	4			-5 V				5 V		Small Outline			Buffer Amplifiers	1150 V/us	5.5 V		85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G14					50 mA	210 MHz
EL5427CRZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	28	SOP	Rectangular	Plastic/Epoxy	-9 V		15 mV	50 nA	Yes	12	CMOS	2.4 mA	-5 V				5 V	5/±5/15 V	Small Outline	TSSOP28,.25	0.9 V/us	Buffer Amplifiers		9 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G28	3	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		2.5 MHz		e3			0.382 in (9.7 mm)
EL5524IREZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	14	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	4	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.197 in (5 mm)
EL5127CYZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-9 V		15 mV	50 nA	Yes	1	CMOS	900 μA	-5 V			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	0.9 V/us	Buffer Amplifiers	2.2 V/us	9 V	0.02 in (0.5 mm)	85 °C (185 °F)	50 nA			-40 °C (-40 °F)	Matte Tin	Dual		S-PDSO-G10		0.043 in (1.1 mm)	0.118 in (3 mm)			2.5 MHz		e3			0.118 in (3 mm)
EL2072CS	Renesas Electronics	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V			50 uA	Yes	1	Bipolar		-5 V				5 V		Small Outline			Buffer Amplifiers	800 V/us	7 V		85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G8					50 mA	730 MHz
EL5329IREZ	Renesas Electronics	Buffer	Industrial	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	50 nA	Yes	10	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	9 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G28		0.047 in (1.2 mm)	0.173 in (4.4 mm)			10 MHz					0.382 in (9.7 mm)
EL5224IREZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	24	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	8	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G24		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.307 in (7.8 mm)
EL5129IRZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy			20 mV	50 nA	Yes	6	CMOS						15 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	9 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)			10 MHz					0.256 in (6.5 mm)
EL5123CYZ-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	4	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	9 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		S-PDSO-G10		0.043 in (1.1 mm)	0.118 in (3 mm)			12 MHz		e3			0.118 in (3 mm)
EL5624IREZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	6	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.256 in (6.5 mm)
EL5224IREZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	24	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	8	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G24		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.307 in (7.8 mm)
EL5323CR-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	24	TSSOP	Rectangular	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	10	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G24		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz					0.307 in (7.8 mm)
EL5524IREZ	Renesas Electronics	Buffer	Industrial	Gull Wing	14	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	4	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz		e3			0.197 in (5 mm)
EL5421TIYZ-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-9.9 V		13 mV	50 nA	Yes	4			-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	12 V/us	9.9 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)			12 MHz		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
EL2002CM	Renesas Electronics	Buffer		Gull Wing	20		Rectangular	Plastic/Epoxy	-18 V		50 mV		Yes	1	Bipolar	10 mA	-15 V				15 V				1200 V/us	Buffer Amplifiers	2000 V/us	18 V		75 °C (167 °F)				0 °C (32 °F)		Dual		R-PDSO-G20					95 mA	180 MHz
EL5624IRE-T13	Renesas Electronics	Buffer	Industrial	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			14 mV	50 nA	Yes	6	CMOS						15 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	15 V/us	18 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		R-PDSO-G20		0.047 in (1.2 mm)	0.173 in (4.4 mm)			12 MHz					0.256 in (6.5 mm)
EL5327CR	Renesas Electronics	Buffer	Industrial	Gull Wing	24	TSSOP	Rectangular	Plastic/Epoxy	-9 V		15 mV	50 nA	Yes	1	CMOS	2 mA	-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP24,.25	0.9 V/us	Buffer Amplifiers	2.2 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA			-40 °C (-40 °F)		Dual		R-PDSO-G24		0.047 in (1.2 mm)	0.173 in (4.4 mm)			2.5 MHz					0.307 in (7.8 mm)
EL5221CY-T7	Renesas Electronics	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-9 V		12 mV	50 nA	Yes	2	CMOS		-5 V				5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	10 V/us	9 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)			12 MHz					0.118 in (3 mm)

Buffer Amplifiers

Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.

The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.

By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.

Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.