Maxim Integrated Buffer Amplifiers 247
| Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Terminal Position | Low-Offset | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
10 uA |
Yes |
1 |
Bipolar |
7.4 mA |
3 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Buffer Amplifiers |
7 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G6 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
e0 |
0.114 in (2.9 mm) |
|||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
LSSOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
1 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP5/6,.11,37 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G5 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
660 MHz |
e0 |
0.114 in (2.9 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Other |
Wire |
12 |
TO-8 |
Round |
Metal |
-20 V |
25 mV |
20 nA |
No |
1 |
Bipolar |
24 mA |
-15 V |
15 V |
±15 V |
Cylindrical |
QUAD12,.4SQ |
1000 V/us |
Buffer Amplifiers |
1400 V/us |
20 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
5 nA |
-25 °C (-13 °F) |
Tin Lead |
Bottom |
O-MBCY-W12 |
No |
100 MHz |
e0 |
||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
10 uA |
Yes |
1 |
Bipolar |
7.4 mA |
3 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Buffer Amplifiers |
7 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G6 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
e0 |
0.114 in (2.9 mm) |
|||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
720 MHz |
e0 |
0.118 in (3 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Military |
Wire |
12 |
TO-8 |
Round |
Metal |
-20 V |
15 mV |
10 nA |
No |
1 |
Bipolar |
22 mA |
-15 V |
15 V |
±15 V |
Cylindrical |
QUAD12,.4SQ |
1000 V/us |
Buffer Amplifiers |
1500 V/us |
20 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
2.5 nA |
-55 °C (-67 °F) |
Tin Lead |
Bottom |
O-MBCY-W12 |
No |
100 MHz |
e0 |
||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
0 V |
15 mV |
12 uA |
Yes |
1 |
Bipolar |
7 mA |
0 V |
5 V |
3.3/5/±5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Buffer Amplifiers |
600 V/us |
12 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
60 mA |
230 MHz |
e0 |
0.118 in (3 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Other |
Wire |
12 |
TO-8 |
Round |
Metal |
-20 V |
20 mV |
10 nA |
No |
1 |
Bipolar |
24 mA |
-15 V |
15 V |
±5/±15 V |
Cylindrical |
QUAD12,.4SQ |
1000 V/us |
Buffer Amplifiers |
1400 V/us |
20 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
2.5 nA |
-25 °C (-13 °F) |
Tin Lead |
Bottom |
O-MBCY-W12 |
No |
100 MHz |
e0 |
||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
8 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
720 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
1 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
660 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
LSSOP |
Rectangular |
Plastic/Epoxy |
0 V |
20 mV |
20 uA |
Yes |
1 |
0 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
Buffer Amplifiers |
600 V/us |
12 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G5 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
60 mA |
140 MHz |
e0 |
0.114 in (2.9 mm) |
|||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
-6 V |
5 mV |
1 nA |
Yes |
1 |
BICMOS |
7.5 mA |
-5 V |
5 V |
±5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Buffer Amplifiers |
12 V/us |
12 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.157 in (4 mm) |
No |
e0 |
0.157 in (4 mm) |
||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
LSSOP |
Rectangular |
Plastic/Epoxy |
0 V |
15 mV |
12 uA |
Yes |
1 |
Bipolar |
7 mA |
0 V |
5 V |
3.3/5/±5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP5/6,.11,37 |
Buffer Amplifiers |
600 V/us |
12 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G5 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
60 mA |
230 MHz |
e0 |
0.114 in (2.9 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
8 mV |
35 uA |
Yes |
2 |
0 V |
3 V |
Small Outline |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
250 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
8 mV |
No |
1 |
Bipolar |
43 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP8,.3 |
350 V/us |
Buffer Amplifiers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
2 nA |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
R-PDIP-T8 |
No |
110 MHz |
e0 |
||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
10 mV |
12 uA |
Yes |
2 |
Bipolar |
14 mA |
0 V |
5 V |
3.3/5/±5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
600 V/us |
12 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
60 mA |
230 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
14 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
8 mV |
35 uA |
Yes |
2 |
0 V |
3 V |
Small Outline |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G14 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
150 MHz |
e3 |
0.341 in (8.65 mm) |
|||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
1 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
660 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
16 |
HSSOP |
Rectangular |
Plastic/Epoxy |
10 mV |
12 uA |
Yes |
1 |
5 V |
Small Outline, Heat Sink/Slug, Shrink Pitch |
Buffer Amplifiers |
600 V/us |
12 V |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.068 in (1.73 mm) |
0.154 in (3.9 mm) |
60 mA |
200 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.193 in (4.89 mm) |
||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
1 |
CMOS |
12 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
1000 V/us |
Buffer Amplifiers |
1300 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
3 uA |
-40 °C (-40 °F) |
Tin/Lead (Sn85Pb15) |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
100 mA |
330 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
LSSOP |
Rectangular |
Plastic/Epoxy |
-6 V |
5 mV |
5 uA |
Yes |
1 |
-5 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G5 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
100 mA |
330 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
0 V |
8 mV |
35 uA |
Yes |
2 |
0 V |
3 V |
Small Outline, Thin Profile, Shrink Pitch |
350 V/us |
6.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
106 mA |
150 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
8 mA |
-5 V |
5 V |
±5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
720 MHz |
e0 |
0.118 in (3 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
No |
8 mV |
35 uA |
Yes |
2 |
Bipolar |
56 mA |
0 V |
Voltage Feedback |
No |
3 V |
±1.425/±3.25/2.85/6.5 V |
Small Outline |
SOP8,.25 |
Operational Amplifiers |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
Yes (AVCL >= 5) |
1000 |
-40 °C (-40 °F) |
Tin Lead |
Dual |
No |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
150 MHz |
No |
e0 |
0.193 in (4.9 mm) |
Yes |
No |
||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
TSOP |
Rectangular |
Plastic/Epoxy |
2 mV |
Yes |
1 |
Bipolar |
510 μA |
3/5 V |
Small Outline, Thin Profile |
TSOP5/6,.11,37 |
Buffer Amplifiers |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin/Lead (Sn85Pb15) |
Dual |
R-PDSO-G5 |
1 |
No |
590 kHz |
e0 |
|||||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
No Lead |
DIE |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
Uncased Chip |
Buffer Amplifiers |
200 V/us |
6 V |
70 °C (158 °F) |
0 °C (32 °F) |
Upper |
X-XUUC-N |
1 |
No |
20 mA |
100 MHz |
||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
Yes |
3 |
Bipolar |
100 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.4 |
Buffer Amplifiers |
200 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
3 uA |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
20 mA |
100 MHz |
e0 |
0.406 in (10.3 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
4 |
CMOS |
45 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP16,.25 |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin/Lead (Sn85Pb15) |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
66 mA |
275 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.39 in (9.9 mm) |
||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
5 uA |
No |
4 |
Bipolar |
120 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP16,.3 |
Buffer Amplifiers |
200 V/us |
6 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
3 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
20 mA |
100 MHz |
e0 |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
1 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
780 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
8 mV |
35 uA |
Yes |
2 |
0 V |
3 V |
Small Outline |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
250 MHz |
e3 |
0.193 in (4.9 mm) |
|||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
TSOP |
Rectangular |
Plastic/Epoxy |
15 mV |
Yes |
1 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline, Thin Profile |
TSOP5/6,.11,37 |
Buffer Amplifiers |
0.037 in (0.95 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G5 |
1 |
No |
780 MHz |
e0 |
||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
8 mA |
-5 V |
5 V |
±5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
720 MHz |
e0 |
0.118 in (3 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
720 MHz |
e0 |
0.118 in (3 mm) |
|||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
No |
8 mV |
35 uA |
Yes |
1 |
Bipolar |
28 mA |
0 V |
Voltage Feedback |
No |
3 V |
±1.425/±3.25/2.85/6.5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
Yes (AVCL >= 5) |
1000 |
-40 °C (-40 °F) |
Tin Lead |
Dual |
No |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
150 MHz |
No |
e0 |
0.193 in (4.9 mm) |
Yes |
No |
||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
6 |
TSSOP |
Rectangular |
Plastic/Epoxy |
35 uA |
Yes |
1 |
BICMOS |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
275 V/us |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G6 |
1 |
0.043 in (1.1 mm) |
0.049 in (1.25 mm) |
No |
40 mA |
45 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.079 in (2 mm) |
||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
No |
8 mV |
35 uA |
Yes |
2 |
Bipolar |
56 mA |
0 V |
Voltage Feedback |
No |
3 V |
±1.425/±3.25/2.85/6.5 V |
Small Outline |
SOP8,.25 |
Operational Amplifiers |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
Yes |
1000 |
-40 °C (-40 °F) |
Tin Lead |
Dual |
No |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
250 MHz |
No |
e0 |
0.193 in (4.9 mm) |
Yes |
No |
||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Matte Tin |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
720 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
0 V |
12 mV |
35 uA |
Yes |
1 |
0 V |
3 V |
Small Outline, Low Profile, Shrink Pitch |
Buffer Amplifiers |
350 V/us |
6.5 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G6 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
106 mA |
250 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
TSOP |
Rectangular |
Plastic/Epoxy |
2 mV |
Yes |
1 |
Bipolar |
510 μA |
3/5 V |
Small Outline, Thin Profile |
TSOP5/6,.11,37 |
Buffer Amplifiers |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin/Lead (Sn85Pb15) |
Dual |
R-PDSO-G5 |
1 |
No |
1.7 MHz |
e0 |
|||||||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
4 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
720 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
14 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
8 mV |
35 uA |
Yes |
2 |
0 V |
3 V |
Small Outline |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G14 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
150 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.341 in (8.65 mm) |
|||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
0 V |
8 mV |
35 uA |
Yes |
1 |
0 V |
3 V |
Small Outline |
Buffer Amplifiers |
350 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
106 mA |
250 MHz |
e0 |
0.193 in (4.9 mm) |
|||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
5 |
LSSOP |
Rectangular |
Plastic/Epoxy |
-6 V |
5 mV |
5 uA |
Yes |
1 |
Bipolar |
12 mA |
-5 V |
5 V |
±5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP5/6,.11,37 |
900 V/us |
Buffer Amplifiers |
1600 V/us |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
3 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G5 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
100 mA |
310 MHz |
e0 |
0.114 in (2.9 mm) |
|||||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
Yes |
1 |
CMOS |
12 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
1000 V/us |
Buffer Amplifiers |
1300 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
3 uA |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
100 mA |
330 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
||||||||||||||||
|
|
Maxim Integrated |
Buffer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
3 mV |
5 uA |
No |
4 |
CMOS |
-5 V |
5 V |
In-Line |
1100 V/us |
Buffer Amplifiers |
1500 V/us |
6 V |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin |
Dual |
R-PDIP-T16 |
1 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
66 mA |
275 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.755 in (19.175 mm) |
||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
16 |
HSSOP |
Rectangular |
Plastic/Epoxy |
10 mV |
12 uA |
Yes |
1 |
5 V |
Small Outline, Heat Sink/Slug, Shrink Pitch |
Buffer Amplifiers |
600 V/us |
12 V |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.068 in (1.73 mm) |
0.154 in (3.9 mm) |
60 mA |
200 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.193 in (4.89 mm) |
||||||||||||||||||||||||||
|
Maxim Integrated |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6 V |
15 mV |
10 uA |
Yes |
2 |
Bipolar |
8 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
4200 V/us |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
530 MHz |
e0 |
0.193 in (4.9 mm) |
Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.
The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.
By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.
Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.