Texas Instruments Buffer Amplifiers 222

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Nominal Unity Gain Bandwidth	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Slew Rate	Sub-Category	Nominal Slow Rate	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Output Current	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
BUF07704AIPWPG4	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6	Bipolar				18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
OPA682N-3K	Texas Instruments	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	1	Bipolar	6.6 mA	-5 V		5 V	±5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G6		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	80 mA	220 MHz	e0			0.114 in (2.9 mm)
CLC417AJE	Texas Instruments	Buffer		Gull Wing	8		Rectangular	Plastic/Epoxy		-7 V	8 mV		Yes	2		9.8 mA	-5 V		5 V				250 V/us	Buffer Amplifiers	400 V/us	7 V		85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8					20 mA	52 MHz
DS15BA101SDX/NOPB	Texas Instruments	Buffer	Industrial	No Lead	8	HVSON	Square	Plastic/Epoxy					Yes	1		49 mA		Tape And Reel	3.3 V		Small Outline, Heat Sink/Slug, Very Thin Profile			Buffer Amplifiers		3.6 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N8	3	0.031 in (0.8 mm)	0.118 in (3 mm)				e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TL32088CNS	Texas Instruments	Buffer	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy			7.5 mV	250 nA	Yes	2					5 V		Small Outline				3 V/us	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDSO-G20		0.079 in (2 mm)	0.209 in (5.3 mm)	No		7 MHz				0.496 in (12.6 mm)
CLC231AK	Texas Instruments	Buffer																						Buffer Amplifiers
DS15BA101SD	Texas Instruments	Buffer	Industrial	No Lead	8	HVSON	Square						Yes	1					3.3 V		Small Outline, Heat Sink/Slug, Very Thin Profile			Buffer Amplifiers		3.465 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Lead	Dual	S-XDSO-N8	3	0.031 in (0.8 mm)	0.118 in (3 mm)	No			e0			0.118 in (3 mm)
BUF06703PW	Texas Instruments	Buffer	Industrial	Gull Wing	16	TSSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1					10 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G16		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		800 kHz				0.197 in (5 mm)
CLC110AJP	Texas Instruments	Buffer	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		-7 V	8 mV	50 uA	No	1	Bipolar	20 mA	-5 V		5 V	±5 V	In-Line	DIP8,.3	500 V/us	Buffer Amplifiers	800 V/us	7 V	0.1 in (2.54 mm)	85 °C (185 °F)	50 uA	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	50 mA	90 MHz	e0			0.386 in (9.817 mm)
THS7327PHP	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy				3.5 uA	Yes	1	CMOS			Tray	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	500 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
LMV115MGX	Texas Instruments	Buffer		Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy					Yes	1		520 μA		Tape And Reel	2.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08			18 V/us	3.6 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)		50 μA					0.079 in (2 mm)
LM310JG	Texas Instruments	Buffer	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic					No	1			-15 V		15 V	±15 V	In-Line	DIP8,.3		Buffer Amplifiers			0.1 in (2.54 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-XDIP-T8				No
TCA4311DR	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			175 mV		Yes	1		7 mA		Tape And Reel	3 V		Small Outline			Buffer Amplifiers		7 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	50 mA		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
THS7318YZFR	Texas Instruments	Buffer	Industrial	Ball	9	VFBGA	Square	Plastic/Epoxy				415 nA	Yes	1					3.3 V		Grid Array, Very Thin Profile, Fine Pitch			Buffer Amplifiers	80 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Tin Silver Copper	Bottom	S-PBGA-B9	1	0.025 in (0.625 mm)	0.069 in (1.75 mm)	No		20 MHz	e1	30 s	260 °C (500 °F)	0.069 in (1.75 mm)
LM6221H	Texas Instruments	Buffer	Industrial	Wire	8		Round	Metal		-18 V	60 mV	7 uA	No	1			-15 V		15 V		Cylindrical			Buffer Amplifiers	800 V/us	18 V		85 °C (185 °F)		-40 °C (-40 °F)		Bottom	O-MBCY-W8						50 MHz
THS7347IPHPG4	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy				3.5 uA	Yes	1	CMOS			Tray	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	550 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
CLC231AI	Texas Instruments	Buffer																						Buffer Amplifiers
OPA3682U/2K5	Texas Instruments	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	3	Bipolar		-5 V		5 V		Small Outline			Buffer Amplifiers	1200 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No						0.39 in (9.9 mm)
BUF11702PWPRG4	Texas Instruments	Buffer	Commercial	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			15 mV	200 pA	Yes	1					10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	70 °C (158 °F)		0 °C (32 °F)		Dual	R-PDSO-G28		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.382 in (9.7 mm)
BUF06704AIPWPG4	Texas Instruments	Buffer	Other	Gull Wing	16	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6	Bipolar				18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G16	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
CLC5612IN	Texas Instruments	Buffer		Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		-7 V		17 uA	No	2	Bipolar	4 mA	-5 V		5 V		In-Line	DIP8,.3	200 V/us	Buffer Amplifiers	290 V/us	7 V	0.1 in (2.54 mm)	85 °C (185 °F)	17 uA	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)		50 mA	49 MHz				0.386 in (9.817 mm)
OPA682P	Texas Instruments	Buffer	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		No	1	Bipolar	6.6 mA	-5 V		5 V	±5 V	In-Line	DIP8,.3	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.1 in (2.54 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	80 mA	220 MHz				0.386 in (9.81 mm)
THS7327PHPR	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy				3.5 uA	Yes	1	CMOS			Tape And Reel	3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	500 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
BUF07704AIPWPRG4	Texas Instruments	Buffer	Other	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6	Bipolar				18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
BUF634AIDDAT	Texas Instruments	Buffer	Automotive	Gull Wing	8	HSOP	Rectangular	Plastic/Epoxy		-20 V	65 mV		Yes	1	Bipolar	2.3 mA	-15 V		15 V		Small Outline, Heat Sink/Slug	SOP8,.25			3750 V/us	20 V	0.05 in (1.27 mm)	125 °C (257 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.067 in (1.7 mm)	0.154 in (3.9 mm)			210 MHz				0.193 in (4.9 mm)
CLC453AJE	Texas Instruments	Buffer		Gull Wing	8		Rectangular	Plastic/Epoxy		-7 V		25 uA	Yes	1	Bipolar	4 mA	-5 V		5 V				300 V/us	Buffer Amplifiers	460 V/us	7 V		85 °C (185 °F)	25 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8					50 mA	70 MHz
LMH6321TS	Texas Instruments	Buffer	Automotive	Gull Wing	7	TO-263	Rectangular	Plastic/Epoxy		-18 V	52 mV	17 uA	Yes	1		20.5 mA	-15 V		15 V	±5/±15 V	Small Outline	SMSIP7H,.55,50TB		Buffer Amplifiers	2900 V/us	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	17 uA	-40 °C (-40 °F)	Tin Lead	Single	R-PSSO-G7	3	0.189 in (4.79 mm)	0.34 in (8.64 mm)	No	300 mA	110 MHz	e0	20 s	235 °C (455 °F)	0.4 in (10.16 mm)
CLC111AJP	Texas Instruments	Buffer	Industrial			DIP				-7 V		15 uA		1	Bipolar		-5 V		5 V						3500 V/us	7 V	0.1 in (2.54 mm)	85 °C (185 °F)		-40 °C (-40 °F)					0.2 in (5.08 mm)	0.3 in (7.62 mm)		25 mA	800 MHz				0.386 in (9.817 mm)
CLC115AMC	Texas Instruments	Buffer		No Lead		DIE				-7 V		20 uA	Yes	4	Bipolar	61 mA	-5 V		5 V		Uncased Chip	DIE OR CHIP	2200 V/us	Buffer Amplifiers	2700 V/us	7 V		125 °C (257 °F)	20 uA	-55 °C (-67 °F)		Upper	X-XUUC-N					48 mA	700 MHz
THS7353PWG4	Texas Instruments	Buffer	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy				5 uA	Yes	1	CMOS				3.3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP20,.25		Buffer Amplifiers	300 V/us	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	40 mA	150 MHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
TCA4311DG4	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy			175 mV		Yes	1					3 V		Small Outline			Buffer Amplifiers		7 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	50 mA		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
OPA682U/2K5	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	1	Bipolar	6.6 mA	-5 V		5 V	±5 V	Small Outline	SOP8,.25	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	80 mA	220 MHz				0.193 in (4.9 mm)
TCA4311DGKR	Texas Instruments	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy			175 mV		Yes	1		7 mA		Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers		7 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	50 mA		e4	30 s	260 °C (500 °F)	0.118 in (3 mm)
OPA682U	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	1	Bipolar	6.6 mA	-5 V		5 V	±5 V	Small Outline	SOP8,.25	570 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	80 mA	220 MHz				0.193 in (4.9 mm)
BUF07703PWP	Texas Instruments	Buffer	Industrial	Gull Wing	20	HTSSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1					10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G20	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		800 kHz	e4	30 s	260 °C (500 °F)	0.256 in (6.5 mm)
LMC6008IM	Texas Instruments	Buffer		Gull Wing	24	SOP	Rectangular	Plastic/Epoxy			25 mV	300 nA	Yes	8		6.5 mA		Rails	14.5 V		Small Outline	SOP24,.4	1.7 V/us			16 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	-40 °C (-40 °F)		Dual	R-PDSO-G24		0.104 in (2.65 mm)	0.295 in (7.5 mm)		150 mA					0.606 in (15.4 mm)
OPA2682U	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		-6.5 V	7.5 mV		Yes	2	Bipolar	13.2 mA	-5 V		5 V	5/±5 V	Small Outline	SOP8,.25	1200 V/us	Buffer Amplifiers	2100 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	55 uA	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	80 mA	330 MHz				0.193 in (4.9 mm)
BUF11702PWP	Texas Instruments	Buffer	Commercial	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			15 mV	200 pA	Yes	1		5.5 mA		Tube	10 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	70 °C (158 °F)		0 °C (32 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)
THS7347IPHPRG4	Texas Instruments	Buffer	Industrial	Gull Wing	48	HTFQFP	Square	Plastic/Epoxy				3.5 uA	Yes	1	CMOS				3.3 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			Buffer Amplifiers	1050 V/us	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Quad	S-PQFP-G48	3	0.047 in (1.2 mm)	0.276 in (7 mm)	No	45 mA	550 MHz	e4	30 s	260 °C (500 °F)	0.276 in (7 mm)
BUF05703PWG4	Texas Instruments	Buffer	Other	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy					Yes	1							Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers			0.026 in (0.65 mm)				Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No			e4			0.197 in (5 mm)
BUF04701AIPW	Texas Instruments	Buffer	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		-6.6 V	7 mV	10 pA	Yes	4	CMOS		-6 V		6 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers	10 V/us	6.6 V	0.026 in (0.65 mm)	125 °C (257 °F)		-40 °C (-40 °F)	Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		8 MHz	e4			0.197 in (5 mm)
LM6125H	Texas Instruments	Buffer	Military	Wire	8		Round	Metal		-18 V	50 mV	7 uA	No	1							Cylindrical			Buffer Amplifiers	50 V/us	18 V		125 °C (257 °F)		-55 °C (-67 °F)		Bottom	O-MBCY-W8						50 MHz
BUF05703PW	Texas Instruments	Buffer	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy			15 mV		Yes	1					10 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers	1 V/us	16.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		800 kHz				0.197 in (5 mm)
BUF06704AIPWPR	Texas Instruments	Buffer	Other	Gull Wing	16	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	6	Bipolar				18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)		Dual	R-PDSO-G16		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz				0.197 in (5 mm)
BUF05703PWRG4	Texas Instruments	Buffer	Other	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy					Yes	1							Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25		Buffer Amplifiers			0.026 in (0.65 mm)				Nickel PalladiumGold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No			e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LMH6559MA/NOPB	Texas Instruments	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	1750 MHz	-6.5 V	25 mV	14 uA	Yes	1	Bipolar	14 mA	-5 V		5 V		Small Outline	SOP8,.25		Buffer Amplifiers	4580 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	50 A	1050 MHz	e3		260 °C (500 °F)	0.193 in (4.902 mm)
TL32088INS	Texas Instruments	Buffer	Commercial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy					Yes	1	Bipolar	18 mA			5 V	5 V	Small Outline	SOP20,.3		Buffer Amplifiers	3 V/us	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		-20 °C (-4 °F)		Dual	R-PDSO-G20		0.079 in (2 mm)	0.209 in (5.3 mm)	No						0.496 in (12.6 mm)
BUF11704AIPWPG4	Texas Instruments	Buffer	Other	Gull Wing	28	HTSSOP	Rectangular	Plastic/Epoxy			20 mV	200 pA	Yes	10	Bipolar				18 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch			Buffer Amplifiers	1.6 V/us	19 V	0.026 in (0.65 mm)	85 °C (185 °F)		-25 °C (-13 °F)	Nickel PalladiumGold	Dual	R-PDSO-G28	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		1 MHz	e4	30 s	260 °C (500 °F)	0.382 in (9.7 mm)

Buffer Amplifiers

Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.

The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.

By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.

Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.