Buffer Amplifiers

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Low-Bias	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Architecture	Programmable Power	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Slew Rate	Sub-Category	Nominal Slow Rate	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Frequency Compensation	Minimum Voltage Gain	Minimum Operating Temperature	Terminal Finish	Terminal Position	Low-Offset	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Output Current	Nominal Bandwidth (3dB)	Micropower	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Wideband	Power
MAX4205ESA-T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	10 uA	Yes	2	Bipolar		4 mA	-5 V			5 V	±5 V	Small Outline	SOP8,.25		Buffer Amplifiers	4200 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		720 MHz		e0			0.193 in (4.9 mm)
MAX4388ESD+	Maxim Integrated	Buffer	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V		8 mV	35 uA	Yes	2				0 V			3 V		Small Outline				350 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	106 mA	150 MHz		e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX4285ESA-T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V		8 mV	35 uA	Yes	1				0 V			3 V		Small Outline			Buffer Amplifiers	350 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	106 mA	250 MHz		e0			0.193 in (4.9 mm)
MAX4278EUK-T	Maxim Integrated	Buffer	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	-6 V		5 mV	5 uA	Yes	1	Bipolar		12 mA	-5 V			5 V	±5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	900 V/us	Buffer Amplifiers	1600 V/us	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	100 mA	310 MHz		e0			0.114 in (2.9 mm)
MAX4178ESA+	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		3 mV	5 uA	Yes	1	CMOS		12 mA	-5 V			5 V	±5 V	Small Outline	SOP8,.25	1000 V/us	Buffer Amplifiers	1300 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	100 mA	330 MHz		e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX497CPE+	Maxim Integrated	Buffer	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V		3 mV	5 uA	No	4	CMOS			-5 V			5 V		In-Line		1100 V/us	Buffer Amplifiers	1500 V/us	6 V	0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Matte Tin	Dual		R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	66 mA	275 MHz		e3	30 s	260 °C (500 °F)	0.755 in (19.175 mm)
MAX4222EEE/GH9-T	Maxim Integrated	Buffer	Industrial	Gull Wing	16	HSSOP	Rectangular	Plastic/Epoxy			10 mV	12 uA	Yes	1							5 V		Small Outline, Heat Sink/Slug, Shrink Pitch			Buffer Amplifiers	600 V/us	12 V	0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G16	1	0.068 in (1.73 mm)	0.154 in (3.9 mm)		60 mA	200 MHz		e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX4203ESA	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	10 uA	Yes	2	Bipolar		8 mA	-5 V			5 V	±5 V	Small Outline	SOP8,.25		Buffer Amplifiers	4200 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		530 MHz		e0			0.193 in (4.9 mm)
MAX468EWE+	Maxim Integrated	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	Yes	4	Bipolar		120 mA	-5 V			5 V		Small Outline			Buffer Amplifiers	200 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G16	1	0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	20 mA	100 MHz		e3	30 s	260 °C (500 °F)	0.406 in (10.3 mm)
LH0033G-T	Maxim Integrated	Buffer	Military	Wire	12	TO-8	Round	Metal	-20 V		15 mV	10 nA	No	1	Bipolar		22 mA	-15 V			15 V		Cylindrical		1000 V/us		1500 V/us	20 V		125 °C (257 °F)				-55 °C (-67 °F)	Tin Lead	Bottom		O-MBCY-W12				No				e0
MAX496CSE-T	Maxim Integrated	Buffer	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		3 mV	5 uA	Yes	4	CMOS			-5 V			5 V		Small Outline		1150 V/us	Buffer Amplifiers	1600 V/us	6 V	0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Dual		R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	66 mA	375 MHz		e0		245 °C (473 °F)	0.39 in (9.9 mm)
MAX4288ESD-T	Maxim Integrated	Buffer	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V		8 mV	35 uA	Yes	2				0 V			3 V		Small Outline			Buffer Amplifiers	350 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	106 mA	250 MHz		e0			0.341 in (8.65 mm)
MAX4222EEE-T	Maxim Integrated	Buffer	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	0 V		10 mV	12 uA	Yes	4	Bipolar		28 mA	0 V			5 V	3.3/5/±5 V	Small Outline, Shrink Pitch	SSOP16,.25		Buffer Amplifiers	600 V/us	12 V	0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	60 mA	200 MHz		e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX4177ESA	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy					Yes	1	CMOS			-5 V			5 V		Small Outline			Buffer Amplifiers	1300 V/us		0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	70 mA	330 MHz		e0			0.193 in (4.9 mm)
MAX4203EUA	Maxim Integrated	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6 V		15 mV	10 uA	Yes	2	Bipolar		8 mA	-5 V			5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		Buffer Amplifiers	4200 V/us	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Tin Lead	Dual		S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No		530 MHz		e0			0.118 in (3 mm)
MAX4203ESA-T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	10 uA	Yes	2	Bipolar		4 mA	-5 V			5 V	±5 V	Small Outline	SOP8,.25		Buffer Amplifiers	4200 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		530 MHz		e0			0.193 in (4.9 mm)
EL2005G	Maxim Integrated	Buffer	Military	Wire	12	TO-8	Round	Metal	-20 V		10 mV	5 nA	No	1	Bipolar		22 mA	-15 V			15 V	±15 V	Cylindrical	QUAD12,.4SQ	1000 V/us	Buffer Amplifiers	1500 V/us	20 V	0.1 in (2.54 mm)	125 °C (257 °F)	500 pA			-55 °C (-67 °F)	Tin Lead	Bottom		O-MBCY-W12				No		140 MHz		e0
MAX4022ESD-T	Maxim Integrated	Buffer	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V		20 mV	20 uA	Yes	4			32 mA	0 V			5 V	3.3/5/±5 V	Small Outline	SOP14,.25		Buffer Amplifiers	600 V/us	12 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	60 mA	140 MHz		e0			0.341 in (8.65 mm)
MAX496CPE+	Maxim Integrated	Buffer	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V		3 mV	5 uA	No	4	CMOS			-5 V			5 V		In-Line		1150 V/us	Buffer Amplifiers	1600 V/us	6 V	0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Matte Tin	Dual		R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	66 mA	375 MHz		e3	30 s	260 °C (500 °F)	0.755 in (19.175 mm)
LH0033G/HR	Maxim Integrated	Buffer	Military	Through-Hole	12	QIP	Square	Metal			15 mV		No	1	Hybrid	MIL-STD-883 Class B (Modified)	22 mA	-15 V			15 V	±15 V	In-Line	QUAD12,.4SQ	1000 V/us	Buffer Amplifiers			0.1 in (2.54 mm)	125 °C (257 °F)	2.5 nA			-55 °C (-67 °F)	Tin/Lead	Quad		S-MQIP-T12				No		100 MHz		e0
MAX470CWE+T	Maxim Integrated	Buffer	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	Yes	4	Bipolar		120 mA	-5 V			5 V		Small Outline			Buffer Amplifiers	300 V/us	6 V	0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)	Matte Tin	Dual		R-PDSO-G16	1	0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	20 mA	90 MHz		e3			0.406 in (10.3 mm)
MAX4286ESA+	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V		8 mV	35 uA	Yes	1				0 V			3 V		Small Outline			Buffer Amplifiers	350 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	106 mA	150 MHz		e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX469C/D	Maxim Integrated	Buffer	Commercial	No Lead		DIE			-6 V		15 mV	5 uA	Yes	3	Bipolar		100 mA	-5 V			5 V		Uncased Chip			Buffer Amplifiers	300 V/us	6 V		70 °C (158 °F)				0 °C (32 °F)		Upper		X-XUUC-N	1			No	20 mA	90 MHz
MAX4278EUA+T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6 V		3 mV	5 uA	Yes	1	CMOS		12 mA	-5 V			5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	900 V/us	Buffer Amplifiers	1600 V/us	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Matte Tin	Dual		S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	100 mA	310 MHz		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX467CPE	Maxim Integrated	Buffer	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	No	3	Bipolar		100 mA	-5 V			5 V	±5 V	In-Line	DIP16,.3		Buffer Amplifiers	200 V/us	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	3 uA			0 °C (32 °F)	Tin Lead	Dual		R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	20 mA	100 MHz		e0			0.755 in (19.175 mm)
MAX469EPE	Maxim Integrated	Buffer	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	No	3	Bipolar		100 mA	-5 V			5 V	±5 V	In-Line	DIP16,.3		Buffer Amplifiers	300 V/us	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Tin Lead	Dual		R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	20 mA	90 MHz		e0			0.755 in (19.175 mm)
MAX4032ELT-T	Maxim Integrated	Buffer	Industrial	No Lead	6	VSON	Square					35 uA	Yes	1	BICMOS						5 V		Small Outline, Very Thin Profile			Buffer Amplifiers	275 V/us	6 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual		S-XDSO-N6		0.031 in (0.8 mm)	0.079 in (2 mm)	No	40 mA	45 MHz					0.079 in (2 mm)
MAX4017EUA-T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V		20 mV	20 uA	Yes	2				0 V			5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	600 V/us	12 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	60 mA	140 MHz		e0			0.118 in (3 mm)
MAX4203EUA-T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-6 V		15 mV	10 uA	Yes	2	Bipolar		4 mA	-5 V			5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		Buffer Amplifiers	4200 V/us	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Tin Lead	Dual		S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No		530 MHz		e0			0.118 in (3 mm)
MAX467EWE+	Maxim Integrated	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	Yes	3	Bipolar		100 mA	-5 V			5 V	±5 V	Small Outline	SOP16,.4		Buffer Amplifiers	200 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G16	1	0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	20 mA	100 MHz		e3	30 s	260 °C (500 °F)	0.406 in (10.3 mm)
MAX405C/D	Maxim Integrated	Buffer	Commercial	No Lead	8	DIE	Rectangular		-6 V		6.5 mV	4 uA	Yes	1	Bipolar			-5 V			5 V		Uncased Chip				650 V/us	6 V		70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Upper		R-XUUC-N8				No	60 mA	180 MHz		e0
MAX4032EXT-T	Maxim Integrated	Buffer	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy				35 uA	Yes	1	BICMOS						5 V		Small Outline, Thin Profile, Shrink Pitch			Buffer Amplifiers	275 V/us	6 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	40 mA	45 MHz		e0			0.079 in (2 mm)
MAX4278ESA+T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V		3 mV	5 uA	Yes	1	CMOS		12 mA	-5 V			5 V	±5 V	Small Outline	SOP8,.25	1000 V/us	Buffer Amplifiers	1600 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	100 mA	310 MHz		e3			0.193 in (4.9 mm)
MAX4032EUT	Maxim Integrated	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy				35 uA	Yes	1	BICMOS						5 V		Small Outline, Low Profile, Shrink Pitch			Buffer Amplifiers	275 V/us	6 V	0.037 in (0.95 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	40 mA	45 MHz		e0			0.114 in (2.9 mm)
MAX4387ESA-T	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V		8 mV	35 uA	Yes	2				0 V			3 V		Small Outline				350 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	106 mA	150 MHz		e0			0.193 in (4.9 mm)
MAX4288EUB+	Maxim Integrated	Buffer	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	0 V		8 mV	35 uA	Yes	2				0 V			3 V		Small Outline, Thin Profile, Shrink Pitch				350 V/us	6.5 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Dual		S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	106 mA	250 MHz		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX4178EPA+	Maxim Integrated	Buffer	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-6 V		3 mV	5 uA	No	1	CMOS		12 mA	-5 V			5 V	±5 V	In-Line	DIP8,.3	800 V/us	Buffer Amplifiers	1300 V/us	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	100 mA	330 MHz		e3	30 s	260 °C (500 °F)	0.369 in (9.375 mm)
BB3553AM	Maxim Integrated	Buffer	Other	Pin/Peg	2	TO-3	Round	Metal	-20 V		50 mV	200 pA	No	1	Bipolar		80 mA	-15 V			15 V	±15 V	Flange Mount	CAN8/9,.5FL	2000 V/us	Buffer Amplifiers	6000 V/us	20 V		85 °C (185 °F)	200 pA			-25 °C (-13 °F)	Tin Lead	Bottom		O-MBFM-P2				No		300 MHz		e0
MAX4285EUT-T	Maxim Integrated	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy	0 V	No	12 mV	35 uA	Yes	1	Bipolar		28 mA	0 V	Voltage Feedback	No	3 V	±1.425/±3.25/2.85/6.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		Buffer Amplifiers	350 V/us	6.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		Yes	1000	-40 °C (-40 °F)	Tin Lead	Dual	No	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	106 mA	250 MHz	No	e0			0.114 in (2.9 mm)	Yes	No
MAX4200EUK	Maxim Integrated	Buffer		Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	-6 V		15 mV		Yes	1			4 mA	-5 V			5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		Buffer Amplifiers	4200 V/us	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)			660 MHz		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX4285EUT+	Maxim Integrated	Buffer		Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy			12 mV	35 uA	Yes	1			28 mA				3 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		Buffer Amplifiers	385 V/us	7.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	35 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)			250 MHz		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX4285ESA	Maxim Integrated	Buffer	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	No	8 mV	35 uA	Yes	1	Bipolar		28 mA	0 V	Voltage Feedback	No	3 V	±1.425/±3.25/2.85/6.5 V	Small Outline	SOP8,.25		Buffer Amplifiers	350 V/us	6.5 V	0.05 in (1.27 mm)	85 °C (185 °F)		Yes	1000	-40 °C (-40 °F)	Tin Lead	Dual	No	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	106 mA	250 MHz	No	e0			0.193 in (4.9 mm)	Yes	No
MAX4286EUT-T	Maxim Integrated	Buffer	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy	0 V	No	12 mV	35 uA	Yes	1	Bipolar		28 mA	0 V	Voltage Feedback	No	3 V	±1.425/±3.25/2.85/6.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		Buffer Amplifiers	350 V/us	6.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		Yes (AVCL >= 5)	1000	-40 °C (-40 °F)	Tin Lead	Dual	No	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	106 mA	150 MHz	No	e0			0.114 in (2.9 mm)	Yes	No
MAX496C/D	Maxim Integrated	Buffer	Commercial	No Lead	16	DIE	Rectangular		-6 V		3 mV	5 uA	Yes	4	CMOS			-5 V			5 V		Uncased Chip			Buffer Amplifiers	1600 V/us	6 V		70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Upper		R-XUUC-N16	1			No	66 mA	375 MHz		e0
MAX4222ESD-T	Maxim Integrated	Buffer	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V		10 mV	12 uA	Yes	4	Bipolar		28 mA	0 V			5 V	3.3/5/±5 V	Small Outline	SOP14,.25		Buffer Amplifiers	600 V/us	12 V	0.05 in (1.27 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	60 mA	200 MHz		e0			0.341 in (8.65 mm)
MAX4202EUK+T	Maxim Integrated	Buffer	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	10 uA	Yes	1	Bipolar		4 mA	-5 V			5 V	±5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		Buffer Amplifiers	4200 V/us	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	10 uA			-40 °C (-40 °F)	Matte Tin	Dual		R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No		780 MHz		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX4219EEE	Maxim Integrated	Buffer	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	0 V		10 mV	12 uA	Yes	3	Bipolar		21 mA	0 V			5 V	3.3/5/±5 V	Small Outline, Shrink Pitch	SSOP16,.25		Buffer Amplifiers	600 V/us	12 V	0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin/Lead (Sn85Pb15)	Dual		R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	60 mA	200 MHz		e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX470EWE-T	Maxim Integrated	Buffer	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V		15 mV	5 uA	Yes	4	Bipolar		120 mA	-5 V			5 V	±5 V	Small Outline	SOP16,.4		Buffer Amplifiers	300 V/us	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	3 uA			-40 °C (-40 °F)	Tin Lead	Dual		R-PDSO-G16		0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	20 mA	90 MHz		e0			0.406 in (10.3 mm)

Buffer Amplifiers

Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.

The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.

By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.

Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.