Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Terminal Position | Low-Offset | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments |
Buffer |
Commercial |
Gull Wing |
20 |
SOP |
Rectangular |
Plastic/Epoxy |
7.5 mV |
250 nA |
Yes |
2 |
5 V |
Small Outline |
3 V/us |
7 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Dual |
R-PDSO-G20 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
7 MHz |
0.496 in (12.6 mm) |
||||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Buffer Amplifiers |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
No Lead |
8 |
HVSON |
Square |
Yes |
1 |
3.3 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
Buffer Amplifiers |
3.465 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-XDSO-N8 |
3 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
e0 |
0.118 in (3 mm) |
|||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
15 mV |
Yes |
1 |
10 V |
Small Outline, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1 V/us |
16.5 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G16 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
800 kHz |
0.197 in (5 mm) |
|||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-7 V |
8 mV |
50 uA |
No |
1 |
Bipolar |
20 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP8,.3 |
500 V/us |
Buffer Amplifiers |
800 V/us |
7 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
50 uA |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
R-PDIP-T8 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
50 mA |
90 MHz |
e0 |
0.386 in (9.817 mm) |
||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
48 |
HTFQFP |
Square |
Plastic/Epoxy |
3.5 uA |
Yes |
1 |
CMOS |
Tray |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
Buffer Amplifiers |
1050 V/us |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Quad |
S-PQFP-G48 |
3 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
45 mA |
500 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||||||||||||
Texas Instruments |
Buffer |
Gull Wing |
6 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
520 μA |
Tape And Reel |
2.8 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP6,.08 |
18 V/us |
3.6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G6 |
0.043 in (1.1 mm) |
0.049 in (1.25 mm) |
50 μA |
0.079 in (2 mm) |
|||||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Commercial |
Through-Hole |
8 |
DIP |
Rectangular |
Ceramic |
No |
1 |
-15 V |
15 V |
±15 V |
In-Line |
DIP8,.3 |
Buffer Amplifiers |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Dual |
R-XDIP-T8 |
No |
||||||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
175 mV |
Yes |
1 |
7 mA |
Tape And Reel |
3 V |
Small Outline |
Buffer Amplifiers |
7 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
50 mA |
e4 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Ball |
9 |
VFBGA |
Square |
Plastic/Epoxy |
415 nA |
Yes |
1 |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Buffer Amplifiers |
80 V/us |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
S-PBGA-B9 |
1 |
0.025 in (0.625 mm) |
0.069 in (1.75 mm) |
No |
20 MHz |
e1 |
30 s |
260 °C (500 °F) |
0.069 in (1.75 mm) |
||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Wire |
8 |
Round |
Metal |
-18 V |
60 mV |
7 uA |
No |
1 |
-15 V |
15 V |
Cylindrical |
Buffer Amplifiers |
800 V/us |
18 V |
85 °C (185 °F) |
-40 °C (-40 °F) |
Bottom |
O-MBCY-W8 |
50 MHz |
|||||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
48 |
HTFQFP |
Square |
Plastic/Epoxy |
3.5 uA |
Yes |
1 |
CMOS |
Tray |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
Buffer Amplifiers |
1050 V/us |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Quad |
S-PQFP-G48 |
3 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
45 mA |
550 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||||||||||||
Texas Instruments |
Buffer |
Buffer Amplifiers |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-6.5 V |
7.5 mV |
Yes |
3 |
Bipolar |
-5 V |
5 V |
Small Outline |
Buffer Amplifiers |
1200 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G16 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
0.39 in (9.9 mm) |
||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Commercial |
Gull Wing |
28 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
15 mV |
200 pA |
Yes |
1 |
10 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1 V/us |
16.5 V |
0.026 in (0.65 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Dual |
R-PDSO-G28 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
1 MHz |
0.382 in (9.7 mm) |
||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Other |
Gull Wing |
16 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
20 mV |
200 pA |
Yes |
6 |
Bipolar |
18 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1.6 V/us |
19 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-25 °C (-13 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G16 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
1 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||||||||||||||
Texas Instruments |
Buffer |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-7 V |
17 uA |
No |
2 |
Bipolar |
4 mA |
-5 V |
5 V |
In-Line |
DIP8,.3 |
200 V/us |
Buffer Amplifiers |
290 V/us |
7 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
17 uA |
-40 °C (-40 °F) |
Dual |
R-PDIP-T8 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
50 mA |
49 MHz |
0.386 in (9.817 mm) |
||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-6.5 V |
7.5 mV |
No |
1 |
Bipolar |
6.6 mA |
-5 V |
5 V |
±5 V |
In-Line |
DIP8,.3 |
570 V/us |
Buffer Amplifiers |
2100 V/us |
6.5 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDIP-T8 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
80 mA |
220 MHz |
0.386 in (9.81 mm) |
||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
48 |
HTFQFP |
Square |
Plastic/Epoxy |
3.5 uA |
Yes |
1 |
CMOS |
Tape And Reel |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
Buffer Amplifiers |
1050 V/us |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Quad |
S-PQFP-G48 |
3 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
45 mA |
500 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Other |
Gull Wing |
20 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
20 mV |
200 pA |
Yes |
6 |
Bipolar |
18 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1.6 V/us |
19 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-25 °C (-13 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G20 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
1 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.256 in (6.5 mm) |
||||||||||||||||||||||||
Texas Instruments |
Buffer |
Automotive |
Gull Wing |
8 |
HSOP |
Rectangular |
Plastic/Epoxy |
-20 V |
65 mV |
Yes |
1 |
Bipolar |
2.3 mA |
-15 V |
15 V |
Small Outline, Heat Sink/Slug |
SOP8,.25 |
3750 V/us |
20 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G8 |
0.067 in (1.7 mm) |
0.154 in (3.9 mm) |
210 MHz |
0.193 in (4.9 mm) |
|||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Gull Wing |
8 |
Rectangular |
Plastic/Epoxy |
-7 V |
25 uA |
Yes |
1 |
Bipolar |
4 mA |
-5 V |
5 V |
300 V/us |
Buffer Amplifiers |
460 V/us |
7 V |
85 °C (185 °F) |
25 uA |
-40 °C (-40 °F) |
Dual |
R-PDSO-G8 |
50 mA |
70 MHz |
|||||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Automotive |
Gull Wing |
7 |
TO-263 |
Rectangular |
Plastic/Epoxy |
-18 V |
52 mV |
17 uA |
Yes |
1 |
20.5 mA |
-15 V |
15 V |
±5/±15 V |
Small Outline |
SMSIP7H,.55,50TB |
Buffer Amplifiers |
2900 V/us |
18 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
17 uA |
-40 °C (-40 °F) |
Tin Lead |
Single |
R-PSSO-G7 |
3 |
0.189 in (4.79 mm) |
0.34 in (8.64 mm) |
No |
300 mA |
110 MHz |
e0 |
20 s |
235 °C (455 °F) |
0.4 in (10.16 mm) |
|||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
DIP |
-7 V |
15 uA |
1 |
Bipolar |
-5 V |
5 V |
3500 V/us |
7 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
25 mA |
800 MHz |
0.386 in (9.817 mm) |
||||||||||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
No Lead |
DIE |
-7 V |
20 uA |
Yes |
4 |
Bipolar |
61 mA |
-5 V |
5 V |
Uncased Chip |
DIE OR CHIP |
2200 V/us |
Buffer Amplifiers |
2700 V/us |
7 V |
125 °C (257 °F) |
20 uA |
-55 °C (-67 °F) |
Upper |
X-XUUC-N |
48 mA |
700 MHz |
|||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
20 |
TSSOP |
Rectangular |
Plastic/Epoxy |
5 uA |
Yes |
1 |
CMOS |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP20,.25 |
Buffer Amplifiers |
300 V/us |
5.5 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G20 |
1 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
40 mA |
150 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.256 in (6.5 mm) |
|||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
175 mV |
Yes |
1 |
3 V |
Small Outline |
Buffer Amplifiers |
7 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
50 mA |
e4 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6.5 V |
7.5 mV |
Yes |
1 |
Bipolar |
6.6 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
570 V/us |
Buffer Amplifiers |
2100 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G8 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
80 mA |
220 MHz |
0.193 in (4.9 mm) |
||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
175 mV |
Yes |
1 |
7 mA |
Tape And Reel |
3 V |
Small Outline, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
7 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Dual |
S-PDSO-G8 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
50 mA |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6.5 V |
7.5 mV |
Yes |
1 |
Bipolar |
6.6 mA |
-5 V |
5 V |
±5 V |
Small Outline |
SOP8,.25 |
570 V/us |
Buffer Amplifiers |
2100 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G8 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
80 mA |
220 MHz |
0.193 in (4.9 mm) |
||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
20 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
15 mV |
Yes |
1 |
10 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1 V/us |
16.5 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G20 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
800 kHz |
e4 |
30 s |
260 °C (500 °F) |
0.256 in (6.5 mm) |
||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Gull Wing |
24 |
SOP |
Rectangular |
Plastic/Epoxy |
25 mV |
300 nA |
Yes |
8 |
6.5 mA |
Rails |
14.5 V |
Small Outline |
SOP24,.4 |
1.7 V/us |
16 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
300 nA |
-40 °C (-40 °F) |
Dual |
R-PDSO-G24 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
150 mA |
0.606 in (15.4 mm) |
||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-6.5 V |
7.5 mV |
Yes |
2 |
Bipolar |
13.2 mA |
-5 V |
5 V |
5/±5 V |
Small Outline |
SOP8,.25 |
1200 V/us |
Buffer Amplifiers |
2100 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
55 uA |
-40 °C (-40 °F) |
Dual |
R-PDSO-G8 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
80 mA |
330 MHz |
0.193 in (4.9 mm) |
|||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Commercial |
Gull Wing |
28 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
15 mV |
200 pA |
Yes |
1 |
5.5 mA |
Tube |
10 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1 V/us |
16.5 V |
0.026 in (0.65 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G28 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
1 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
|||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
48 |
HTFQFP |
Square |
Plastic/Epoxy |
3.5 uA |
Yes |
1 |
CMOS |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
Buffer Amplifiers |
1050 V/us |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Quad |
S-PQFP-G48 |
3 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
45 mA |
550 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Other |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Buffer Amplifiers |
0.026 in (0.65 mm) |
Nickel PalladiumGold |
Dual |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
e4 |
0.197 in (5 mm) |
||||||||||||||||||||||||||||||||||
Texas Instruments |
Buffer |
Automotive |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
-6.6 V |
7 mV |
10 pA |
Yes |
4 |
CMOS |
-6 V |
6 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Buffer Amplifiers |
10 V/us |
6.6 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
8 MHz |
e4 |
0.197 in (5 mm) |
||||||||||||||||||||||||
Texas Instruments |
Buffer |
Military |
Wire |
8 |
Round |
Metal |
-18 V |
50 mV |
7 uA |
No |
1 |
Cylindrical |
Buffer Amplifiers |
50 V/us |
18 V |
125 °C (257 °F) |
-55 °C (-67 °F) |
Bottom |
O-MBCY-W8 |
50 MHz |
|||||||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
15 mV |
Yes |
1 |
10 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Buffer Amplifiers |
1 V/us |
16.5 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G14 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
800 kHz |
0.197 in (5 mm) |
||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Other |
Gull Wing |
16 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
20 mV |
200 pA |
Yes |
6 |
Bipolar |
18 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1.6 V/us |
19 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-25 °C (-13 °F) |
Dual |
R-PDSO-G16 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
1 MHz |
0.197 in (5 mm) |
|||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Other |
Gull Wing |
14 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP14,.25 |
Buffer Amplifiers |
0.026 in (0.65 mm) |
Nickel PalladiumGold |
Dual |
R-PDSO-G14 |
1 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
1750 MHz |
-6.5 V |
25 mV |
14 uA |
Yes |
1 |
Bipolar |
14 mA |
-5 V |
5 V |
Small Outline |
SOP8,.25 |
Buffer Amplifiers |
4580 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.753 mm) |
0.154 in (3.899 mm) |
No |
50 A |
1050 MHz |
e3 |
260 °C (500 °F) |
0.193 in (4.902 mm) |
|||||||||||||||||||
Texas Instruments |
Buffer |
Commercial |
Gull Wing |
20 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Bipolar |
18 mA |
5 V |
5 V |
Small Outline |
SOP20,.3 |
Buffer Amplifiers |
3 V/us |
7 V |
0.05 in (1.27 mm) |
70 °C (158 °F) |
-20 °C (-4 °F) |
Dual |
R-PDSO-G20 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
0.496 in (12.6 mm) |
||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Other |
Gull Wing |
28 |
HTSSOP |
Rectangular |
Plastic/Epoxy |
20 mV |
200 pA |
Yes |
10 |
Bipolar |
18 V |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
Buffer Amplifiers |
1.6 V/us |
19 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-25 °C (-13 °F) |
Nickel PalladiumGold |
Dual |
R-PDSO-G28 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
1 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
||||||||||||||||||||||||
Texas Instruments |
Buffer |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
-6.5 V |
7.5 mV |
Yes |
1 |
Bipolar |
6.6 mA |
-5 V |
5 V |
±5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
570 V/us |
Buffer Amplifiers |
2100 V/us |
6.5 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G6 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
80 mA |
220 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||||||
Texas Instruments |
Buffer |
Military |
Wire |
8 |
Round |
Metal |
-18 V |
50 mV |
7 uA |
No |
1 |
MIL-STD-883 |
Cylindrical |
Buffer Amplifiers |
50 V/us |
18 V |
125 °C (257 °F) |
-55 °C (-67 °F) |
Bottom |
O-MBCY-W8 |
50 MHz |
||||||||||||||||||||||||||||||||||||
|
Texas Instruments |
Buffer |
Automotive |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
-6.6 V |
7 mV |
10 pA |
Yes |
4 |
CMOS |
1.5 mA |
-5 V |
5 V |
3.5/12 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Buffer Amplifiers |
10 V/us |
6.6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
10 pA |
-40 °C (-40 °F) |
Dual |
S-PDSO-G10 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
8 MHz |
0.118 in (3 mm) |
|||||||||||||||||||||||
Texas Instruments |
Buffer |
Gull Wing |
14 |
SOP |
Rectangular |
Plastic/Epoxy |
-6.5 V |
25 mV |
14 uA |
Yes |
4 |
63 mA |
-5 V |
Tape And Reel |
5 V |
Small Outline |
SOP14,.25 |
3100 V/us |
6.5 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
10 uA |
-40 °C (-40 °F) |
Dual |
R-PDSO-G14 |
0.069 in (1.753 mm) |
0.154 in (3.899 mm) |
40 mA |
0.34 in (8.6235 mm) |
Buffer amplifiers are electronic circuits that are designed to provide a high input impedance and a low output impedance. They are used to isolate one part of a circuit from another, preventing changes in one part of the circuit from affecting the other.
The primary function of a buffer amplifier is to prevent loading effects, which occur when a device with a low input impedance is connected to a device with a high output impedance. In this scenario, the high output impedance of the first device may cause a decrease in signal strength or distortion in the second device.
By using a buffer amplifier, the high output impedance of the first device is isolated from the second device, ensuring that the signal is transferred with minimal distortion. The buffer amplifier acts as a bridge between the two devices, allowing them to operate independently.
Buffer amplifiers are commonly used in audio applications, such as preamplifiers, where they can be used to isolate a sensitive input signal from a power amplifier that requires a low impedance input. They are also used in other applications, such as instrumentation, signal conditioning, and data acquisition, where signal integrity is critical.