Comparator Comparators 2,400+

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MAX913CSA+T

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

8 uA

Yes

1

BIPOLAR

10 mA

-5 V

5 V

5/±5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 uA

10 ns

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6567T-E/MSVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

TS 16949

260 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

NCS2200SN1T1G

Onsemi

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

10 nA

Yes

1

CMOS

17 μA

0 V

Tape And Reel

3 V

1/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

105 °C (221 °F)

1.1 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

TL331BQDBVRQ1

Texas Instruments

Comparator

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

2.5 mV

-50 nA

Yes

1

BIPOLAR

AEC-Q100

330 μA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

38 V

0.037 in (0.95 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLC3702CD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

40 μA

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

30 pA

2.7 µs

Push-Pull

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV7034QPWRQ1

Texas Instruments

Comparator

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

Yes

4

AEC-Q100

3 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 pA

3 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV7041DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

7 V

0.019 in (0.48 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

0.031 in (0.8 mm)

AD8611ARM-R2

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.118 in (3 mm)

AD8611ARM-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

Tape And Reel

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Tin/Lead (Sn85Pb15)

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.118 in (3 mm)

ADCMP361WYRJZ-RL7

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 nA

Yes

1

3.3 V

Small Outline, Low Profile, Shrink Pitch

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

8 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

JM38510/10304BGA

Texas Instruments

Comparator

Military

Wire

8

TO-99

Round

Metal

-30 V

3 mV

100 pA

No

1

BIPOLAR

MIL-M-38510 Class B

6 mA

-15 V

15 V

Cylindrical

Comparators

30 V

125 °C (257 °F)

100 nA

640 ns

Open-Collector, Open-Drain

-55 °C (-67 °F)

Bottom

O-MBCY-W8

1

No

LM2903AVQDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903BQDDFRQ1

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2.5 mV

50 nA

Yes

2

AEC-Q100

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP8,.11,25

Comparators

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM393LVPWR

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

3 mV

Yes

2

100 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LMV339MX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

250 nA

Yes

4

BICMOS

300 μA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LMV393MMX

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

250 μA

0 V

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

LMV393MX

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

100 μA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.193 in (4.9 mm)

LMV7272TL/NOPB

Texas Instruments

Comparator

Industrial

Ball

8

VFBGA

Square

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

28 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Grid Array, Very Thin Profile, Fine Pitch

BGA8,3X3,20

Comparators

5.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

100 nA

1.8 µs

Push-Pull

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-PBGA-B8

1

0.024 in (0.6 mm)

0.06 in (1.514 mm)

No

e1

260 °C (500 °F)

0.06 in (1.514 mm)

LT1715HMS#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

4 mV

-7 uA

Yes

2

BIPOLAR

-5 V

Tape And Reel

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6700IDCB-3#TRMPBF

Analog Devices

Comparator

Industrial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

NCV2200SN2T1G

Onsemi

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

Yes

1

CMOS

AEC-Q100

17 μA

Tape And Reel

3 V

1/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

105 °C (221 °F)

1.1 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

0.118 in (3 mm)

PLM2903BIDGKR

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

25 nA

Yes

2

BIPOLAR

800 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

38 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

PLM393LVQPWRQ1

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

2

AEC-Q100

70 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 pA

600 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLC374CN

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

No

4

CMOS

600 μA

Tube

5 V

5 V

In-Line

DIP14,.3

Comparators

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

30 pA

650 ns

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.76 in (19.305 mm)

TLV3011AIDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3011AIDBVT

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3492AID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

2.4 μA

Tube

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3492AIDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV7011DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

5 pA

Yes

1

10 μA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

6 V

0.019 in (0.48 mm)

125 °C (257 °F)

5 pA

310 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

260 °C (500 °F)

0.031 in (0.8 mm)

ADCMP600BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LM111H

Texas Instruments

Comparator

Military

Wire

8

TO-5

Round

Metal

-18 V

4 mV

150 nA

No

1

BIPOLAR

6 mA

-15 V

15 V

±15 V

Cylindrical

CAN8,.2

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

100 nA

200 ns

Open-Collector, Open-Drain

-55 °C (-67 °F)

Bottom

O-MBCY-W8

1

0.225 in (5.72 mm)

0.357 in (9.08 mm)

No

0.357 in (9.08 mm)

LM119J/883

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

-18 V

7 mV

1 uA

No

2

BIPOLAR

MIL-STD-883

11 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP14,.3

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

500 nA

80 ns

Open-Collector

-55 °C (-67 °F)

Tin/Lead

Dual

R-GDIP-T14

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.76 in (19.304 mm)

LM193AH/883B

National Semiconductor

Comparator

Military

Wire

8

Round

Metal

0 V

4 mV

300 nA

No

2

BIPOLAR

MIL-STD-883 Class B

0 V

5 V

5 V

Cylindrical

CAN8,.2

Comparators

36 V

125 °C (257 °F)

1.3 µs

Open-Collector

-55 °C (-67 °F)

Tin Lead

Bottom

O-MBCY-W8

No

e0

LM193JG/883B

Texas Instruments

Comparator

Military

Through-Hole

8

DIP

Rectangular

Ceramic

9 mV

No

BIPOLAR

MIL-STD-883 Class B (Modified)

5 V

5 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

125 °C (257 °F)

-55 °C (-67 °F)

Dual

R-XDIP-T8

No

LM2901AVQPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM2903AM8-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

500 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

10 s

260 °C (500 °F)

0.118 in (3 mm)

LMC6762AIM/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

1 pA

Yes

2

CMOS

20 μA

0 V

Tube

5 V

2.7/15 V

Small Outline

SOP8,.25

Comparators

16 V

0.05 in (1.27 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMC7215QIM5X/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

0.05 pA

Yes

1

CMOS

AEC-Q100

1 μA

Tape And Reel

5 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

10 V

0.037 in (0.95 mm)

85 °C (185 °F)

0.05 pA

12.2 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

LMV7235M7X

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

600 nA

Yes

1

BIPOLAR

110 μA

0 V

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

600 nA

68 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

260 °C (500 °F)

0.079 in (2 mm)

LT1017CN8#PBF

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

1.4 mV

25 nA

No

2

0 V

4.5 V

In-Line

Comparators

40 V

0.1 in (2.54 mm)

70 °C (158 °F)

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T8

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

e3

30 s

260 °C (500 °F)

LT1017CS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

1.4 mV

25 nA

Yes

2

0 V

Tape And Reel

4.5 V

Small Outline

Comparators

40 V

0.05 in (1.27 mm)

70 °C (158 °F)

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1712IGN

Analog Devices

Comparator

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-6.3 V

6 mV

10 uA

Yes

2

-5 V

5 V

Small Outline, Shrink Pitch

Comparators

6.3 V

0.025 in (0.635 mm)

85 °C (185 °F)

5.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.8895 mm)

LT1719IS6

Analog Devices

Comparator

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

0 V

3.5 mV

0 uA

Yes

1

BIPOLAR

0 V

5 V

Small Outline, Low Profile, Shrink Pitch

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

7 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

0.116 in (2.95 mm)

LT1719IS6#TR

Analog Devices

Comparator

Industrial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

3.5 mV

0 uA

Yes

1

BIPOLAR

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

7 V

0.037 in (0.95 mm)

85 °C (185 °F)

7 ns

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT6700IS6-1#TR

Analog Devices

Comparator

Industrial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

20 s

235 °C (455 °F)

0.114 in (2.9 mm)

LT6700MPDCB-1#PBF

Analog Devices

Comparator

Military

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-55 °C (-67 °F)

Matte Tin - annealed

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX997ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2 mV

15 uA

Yes

1

CMOS

650 μA

3 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

15 uA

4.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX997ESA+

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2 mV

15 uA

Yes

1

CMOS

6.5 mA

3 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

15 uA

4.5 ns

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.