Comparator Comparators 2,400+

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MCP6546-I/MS

Microchip Technology

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

100 pA

Yes

1

CMOS

TS 16949

1 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40

260 °C (500 °F)

0.118 in (3 mm)

MCP6546T-I/OT

Microchip Technology

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

100 pA

Yes

1

CMOS

TS 16949

1 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

85 °C (185 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.059 in (1.5 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

NCS2200SQ2T2GH

Onsemi

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

Yes

1

CMOS

17 μA

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

105 °C (221 °F)

1.1 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

NE521DR2G

Onsemi

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-7 V

10 mV

40 uA

Yes

2

BIPOLAR

35 mA

-5 V

5 V

±5 V

Small Outline

SOP14,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

20 uA

9.6 ns

Totem Pole

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

NJM339D

New Japan Radio

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

5 mV

250 nA

No

4

BIPOLAR

2.5 mA

5 V

In-Line

Comparators

36 V

0.1 in (2.54 mm)

70 °C (158 °F)

Open-Collector

0 °C (32 °F)

Tin Bismuth

Dual

R-PDIP-T14

0.185 in (4.7 mm)

0.3 in (7.62 mm)

No

e6

0.748 in (19 mm)

NJM339E-(TE2)

New Japan Radio

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

5 mV

250 nA

Yes

4

BIPOLAR

2.5 mA

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

Open-Collector

0 °C (32 °F)

Tin Bismuth

Dual

R-PDSO-G14

0.075 in (1.9 mm)

0.154 in (3.9 mm)

No

e6

0.343 in (8.7 mm)

PLM2903BQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4 mV

50 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

0 V

Tape And Reel

5 V

Small Outline

SOP8,.25

Comparators

38 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

TC75W56FU,LF

Toshiba

Comparator

Comparators

TC75W56FU,LF(T

Toshiba

Comparator

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

7 mV

Yes

2

CMOS

40 μA

3 V

Small Outline, Low Profile, Shrink Pitch

SOP8,.16,51

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

30 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.051 in (1.3 mm)

0.11 in (2.8 mm)

0.114 in (2.9 mm)

TC75W56FULF(T

Toshiba

Comparator

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

7 mV

Yes

2

CMOS

40 μA

3 V

Small Outline, Low Profile, Shrink Pitch

SOP8,.16,51

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

30 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.051 in (1.3 mm)

0.11 in (2.8 mm)

0.114 in (2.9 mm)

TL3016ID

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

10 uA

Yes

1

BIPOLAR

12.5 mA

-5 V

Tube

5 V

5/±5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 uA

7.8 µs

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TL391BIDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

SOP

Rectangular

Plastic/Epoxy

2.5 mV

25 nA

Yes

1

BIPOLAR

330 μA

Tape And Reel

5 V

Small Outline

TSOP5/6,.11,37

Comparators

38 V

0.037 in (0.95 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLC3702IPWG4

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

2

CMOS

65 μA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLC3702QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

30 nA

Yes

2

CMOS

AEC-Q100

40 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLC3704QDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

30 pA

Yes

4

CMOS

AEC-Q100

80 μA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

1.1 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TLC374CPWRG4

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

800 μA

5 V

5/10 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

650 ns

Open-Drain

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLC393CPW

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

600 pA

Yes

2

CMOS

40 μA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

70 °C (158 °F)

2 pA

2.5 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLC393IPW

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

2 nA

Yes

2

CMOS

40 μA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

2 pA

2.5 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLV1701AQDCKTQ1

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

-20 V

6.5 mV

20 nA

Yes

1

AEC-Q100

Tape And Reel

Small Outline, Thin Profile, Shrink Pitch

TSSOP5,.08

Comparators

20 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

365 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

TLV2352IPWR

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

2 nA

Yes

2

CMOS

300 μA

Tape And Reel

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

8 V

0.026 in (0.65 mm)

85 °C (185 °F)

2 nA

640 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

TLV3011AIDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

12 mV

10 pA

Yes

1

CMOS

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3011AIDBVTG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3011AIDCKR

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3011AIDCKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3011AQDBVRQ1

Texas Instruments

Comparator

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6 mV

10 pA

Yes

1

AEC-Q100

7 μA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3401CD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3401CDBVR

Texas Instruments

Comparator

Commercial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

2.7 V

±1.25/±8/2.5/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

70 °C (158 °F)

100 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3401CDR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

950 nA

0 V

2.7 V

±1.25/±8/2.5/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 pA

175 µs

Open-Drain

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

TLV3402IDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3603QDCKRQ1

Texas Instruments

Comparator

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

AEC-Q100

7.8 mA

Tape And Reel

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3691IDPFR

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Square

Plastic/Epoxy

22 mV

20 nA

Yes

1

150 nA

Tape And Reel

0.9/6.5 V

Small Outline, Very Think Profile

SOLCC6,.04,14

Comparators

7 V

0.014 in (0.35 mm)

125 °C (257 °F)

100 pA

40 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-N6

1

0.016 in (0.4 mm)

0.039 in (1 mm)

No

e4

260 °C (500 °F)

0.039 in (1 mm)

TLV6713DDCR

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

2 mV

25 nA

Yes

1

11 μA

12 V

Small Outline, Thin Profile

Comparators

40 V

0.037 in (0.95 mm)

125 °C (257 °F)

25 nA

28.1 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7211AIDBVR

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

0.04 pA

Yes

1

CMOS

14 μA

0 V

Tape And Reel

5 V

3/15 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

16 V

0.037 in (0.95 mm)

85 °C (185 °F)

0.04 pA

10 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7256IDDUR

Texas Instruments

Comparator

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

7 mV

4 pA

Yes

2

CMOS

120 μA

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP8,.12,20

Comparators

7 V

0.02 in (0.5 mm)

85 °C (185 °F)

4 pA

30 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.035 in (0.9 mm)

0.079 in (2 mm)

No

e4

30 s

260 °C (500 °F)

0.091 in (2.3 mm)

TLV9022DSGR

Texas Instruments

Comparator

No Lead

8

HVSON

Square

Plastic/Epoxy

2 mV

Yes

2

70 μA

Tape And Reel, 7 Inch

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV9022QDGKRQ1

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

Yes

2

AEC-Q100

70 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV9034RTER

Texas Instruments

Comparator

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2 mV

Yes

4

140 μA

Tape And Reel, 13 Inch

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

115 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N16

1

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TS339IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

6.5 mV

600 pA

Yes

4

CMOS

100 μA

0 V

Tape And Reel

3 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.5 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

40

260 °C (500 °F)

0.341 in (8.65 mm)

TS391AILT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

2 mV

250 nA

Yes

1

BIPOLAR

1.25 mA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

150 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TS391IQ2T

STMicroelectronics

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

1.25 mA

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

36 V

0.02 in (0.5 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

S-PDSO-N8

1

0.024 in (0.6 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

TS391RIYLT

STMicroelectronics

Comparator

Tape And Reel

Comparators

UPC271G2-A

Renesas Electronics

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

7.5 mV

250 nA

Yes

1

BIPOLAR

-15 V

15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

200 ns

Open-Collector

-40 °C (-40 °F)

Tin Bismuth

Dual

R-PDSO-G8

0.071 in (1.8 mm)

0.173 in (4.4 mm)

e6

10 s

260 °C (500 °F)

0.205 in (5.2 mm)

ADCMP603BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

CMOS

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

AS393MTR-G1

Diodes Incorporated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

400 nA

Yes

2

BIPOLAR

3 mA

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline

SOP8,.25

Comparators

40 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

BA10339F-E2

ROHM

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

5 mV

250 nA

Yes

4

BIPOLAR

2 mA

5 V

±1.5/±18/3/36 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Copper

Dual

R-PDSO-G14

0.063 in (1.6 mm)

0.173 in (4.4 mm)

No

e2

10 s

260 °C (500 °F)

0.343 in (8.7 mm)

BA82903YF-CE2

ROHM

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

275 nA

Yes

2

AEC-Q100

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 ns

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.067 in (1.71 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

LM119H-QMLV

Texas Instruments

Comparator

Military

Wire

10

TO-100

Round

Metal

-18 V

3.8 mV

475 nA

No

2

BIPOLAR

MIL-PRF-38535 Class V

-15 V

15 V

±15 V

Cylindrical

CAN10,.23

Comparators

18 V

125 °C (257 °F)

475 nA

80 ns

Open-Collector

-55 °C (-67 °F)

Bottom

O-MBCY-W10

1

No

LM211QDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

150 nA

Yes

1

BIPOLAR

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.