Comparator Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV2354MFKB	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		5 mV	20 nA	Yes	4	CMOS	MIL-STD-883	600 μA		Tube	3 V	3/5 V	Chip Carrier	LCC20,.35SQ	Comparators	8 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	1.4 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	No		e0			0.35 in (8.89 mm)
V62/03672-02XE	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	2.5 mV	-400 nA	Yes	4	BIPOLAR		2 mA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV7272TL	Texas Instruments	Comparator	Industrial	Ball	8	VFBGA	Square		Plastic/Epoxy	0 V	4 mV		Yes	1	BICMOS			0 V		1.8 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	5.5 V	0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Bottom	S-PBGA-B8	1	0.024 in (0.6 mm)	0.06 in (1.514 mm)	No		e0			0.06 in (1.514 mm)
LMV339IDG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA			5 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
PTLV7081YKAR	Texas Instruments	Comparator																						Comparators
LM311JG4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	300 nA	No	1	BIPOLAR		7.5 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		115 ns	Open-Collector, Open-Emitter	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
LT1016ML	Texas Instruments	Comparator	Military	Wire	10		Round		Metal	-7 V	3 mV	13 uA	No	1	BIPOLAR		35 mA	-5 V		5 V	±5 V	Cylindrical	CAN10,.23	Comparators	7 V		125 °C (257 °F)	10 uA	10 ns		-55 °C (-67 °F)		Bottom	O-MBCY-W10				No
TLV1391IDBV	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		150 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No					0.114 in (2.9 mm)
TLV7032QDGKRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Square		Plastic/Epoxy		8 mV		Yes	2		AEC-Q100	1.5 μA		Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		7 V	0.026 in (0.65 mm)	125 °C (257 °F)	2 pA	3 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)			e4		260 °C (500 °F)	0.118 in (3 mm)
TL510MFH/883B	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)						Chip Carrier	LCC20,.35SQ	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Quad	S-XQCC-N20				No
LM3302MWA	Texas Instruments	Comparator	Industrial	No Lead		DIE				0 V	40 mV	1 uA	Yes	4	BIPOLAR			0 V		5 V		Uncased Chip		Comparators	28 V		85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Upper	X-XUUC-N				No
TLC371IP	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	1	CMOS		200 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
LM339AJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		4 mV		No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-XDIP-T14
LT1011ACP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-18 V	1.5 mV	50 nA	No	1	BIPOLAR		4 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 nA	150 ns		0 °C (32 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
5962-8773901CA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		2 mV	25 nA	No	4	BIPOLAR	MIL-STD-883	2 mA		Tube	5 V	5/30 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	25 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.263 in (6.67 mm)	Yes		e0			0.77 in (19.56 mm)
LM139AN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV	-300 nA	No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.76 in (19.305 mm)
SN52811L	Texas Instruments	Comparator	Military	Wire	10		Round		Metal						BIPOLAR							Cylindrical	CAN10,.23	Comparators			125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-W10				No
TLC374CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		6.5 mV		No		CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns		0 °C (32 °F)		Dual	R-XDIP-T14
TLC372CPP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		CMOS					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
INA204AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		3.5 mV		Yes	2			2.8 mA			12 V	12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	16 uA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	4.4 MHz				0.197 in (5 mm)
LPV7215MG	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS		1.2 μA	0 V		2.7 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e0		260 °C (500 °F)	0.079 in (2 mm)
5962-01-289-9696	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LP365AN	Texas Instruments	Comparator	Commercial	Through-Hole	16	DIP	Rectangular		Plastic/Epoxy	-18 V	6 mV	500 nA	No	4	BIPOLAR			-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		1 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)						0.856 in (21.755 mm)
5962-87658012A	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		10 mV	20 nA	Yes	2	CMOS	MIL-STD-883	300 μA		Tube	5 V	5 V	Chip Carrier	LCC20,.35SQ	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	Yes		e0			0.35 in (8.89 mm)
TLC3704CNE4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	No	4	CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
LM3302N	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	No	4	BIPOLAR		2 mA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	28 V	0.1 in (2.54 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TLC372MFKB	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		10 mV	20 nA	Yes	2	CMOS	MIL-STD-883	300 μA		Tube	5 V	5 V	Chip Carrier	LCC20,.35SQ	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	No		e0			0.35 in (8.89 mm)
LM360MDA	Texas Instruments	Comparator	Commercial	No Lead		DIE				-8 V	5 mV	20 uA	Yes	1	BIPOLAR			-5 V		5 V		Uncased Chip		Comparators	8 V		70 °C (158 °F)		14 ns	Totem Pole	0 °C (32 °F)		Upper	X-XUUC-N				No
LM111FH	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic		4 mV		Yes		BIPOLAR			-15 V		15 V	±15 V	Chip Carrier	LCC20,.35SQ	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Quad	S-XQCC-N20				No
UA711MU	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR						12,-6 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
JM38510/11202BPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		9 mV	-300 nA	No	2	BIPOLAR	MIL-M-38510 Class B	2.5 mA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e0			0.377 in (9.58 mm)
LM111U	Texas Instruments	Comparator	Military	Flat	10	DFP	Square		Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	Yes	1	BIPOLAR		6 mA	-15 V		15 V	±15 V	Flatpack	FL10,.3	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		115 ns	Open-Collector, Open-Emitter	-55 °C (-67 °F)		Dual	S-GDFP-F10		0.08 in (2.03 mm)	0.245 in (6.225 mm)	No					0.245 in (6.225 mm)
TLC339CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
PTLV7022DGKR	Texas Instruments	Comparator	Automotive	Gull Wing	8	HTSSOP	Square		Plastic/Epoxy		8 mV		Yes	2						5 V		Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		260 ns	Open-Drain	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)						0.118 in (3 mm)
TLC3704CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		6.5 mV	600 pA	No	4	CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		1.1 µs	Totem Pole	0 °C (32 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.77 in (19.56 mm)
TLV3494AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		15 mV	10 pA	Yes	4	CMOS		4.8 μA		Tape And Reel	5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
TLC339INE4	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	4	CMOS		125 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TLC3702QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		5 mV	30 nA	Yes	2	CMOS	AEC-Q100	40 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	30 pA	4.5 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL714CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	600 uA	Yes	1	BIPOLAR		12 mA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 uA	6 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM193MD8	Texas Instruments	Comparator	Military	No Lead		DIE				0 V	9 mV	300 nA	Yes	2	BIPOLAR	MIL-STD-883	1 mA	0 V		5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	X-XUUC-N	1			No			40	260 °C (500 °F)
TL3116CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	1.2 uA	Yes	1	BIPOLAR		15 mA	-5 V		5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC339IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		125 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM2903QP	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		15 mV	-500 nA	No	2	BIPOLAR		2.5 mA			5 V	5/30 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
UA711CNP3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
5962R9673802V9A	Texas Instruments	Comparator	Military	No Lead		DIE		100k Rad(Si)			4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA			5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	X-XUUC-N	1			Yes
LMV7239QM7X/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		8 mV	600 nA	Yes	1	BIPOLAR	AEC-Q100	95 μA		Tape And Reel	5 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA	75 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e3		260 °C (500 °F)	0.079 in (2 mm)
LMV7231SQ	Texas Instruments	Comparator	Automotive	No Lead	24	HVQCCN	Square					15 nA	Yes	1						3.3 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	6 V	0.02 in (0.5 mm)	125 °C (257 °F)		500 ns	Open-Drain	-40 °C (-40 °F)		Quad	S-XQCC-N24		0.031 in (0.8 mm)	0.157 in (4 mm)	No					0.157 in (4 mm)
5962R0052402V9X	Texas Instruments	Comparator	Military	No Lead	10	DIE	Rectangular	100k Rad(Si)		-30 V	4 mV	100 pA	Yes	1		MIL-PRF-38535 Class V	7 mA	-15 V		15 V		Uncased Chip		Comparators	30 V		125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Upper	R-XUUC-N10				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.