14 Comparators 1,628

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TS3704CJ	STMicroelectronics	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic		5 mV		No	4	CMOS		80 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		2.3 µs		0 °C (32 °F)	Tin/Lead	Dual	R-XDIP-T14				No	e0
TS864IDT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	4	BICMOS		16 μA		Tape And Reel	5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
ESM1602B	STMicroelectronics	Comparator	Other	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy			5 uA	No	4	BIPOLAR		13 mA	-15 V		15 V	35 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	85 °C (185 °F)			Open-Collector	-25 °C (-13 °F)	Tin Lead	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e0
TS334IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6 mV	100 nA	Yes	4			38 μA		Tape And Reel	1.8 V	1.8/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		420 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM2901YD	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	15 mV	400 nA	Yes	4	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS374IN	STMicroelectronics	Comparator	Automotive	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	12 mV	300 pA	No	4	CMOS		1 mA	0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
TS864IN	STMicroelectronics	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		18 mV	600 pA	No	4	BICMOS					5 V	2.7/10 V	In-Line	DIP14,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
LM2901HYD	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	15 mV	400 nA	Yes	4		AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	150 °C (302 °F)		1.3 µs		-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
MC3302J	STMicroelectronics	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Ceramic, Metal-Sealed Cofired	0 V	9 mV	400 nA	No	4	BIPOLAR		2 mA	0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-CDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
LM239DP	STMicroelectronics	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		9 mV	400 nA	No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	100 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.783 in (19.9 mm)
LM339EDT	STMicroelectronics	Comparator		Gull Wing	14	SOP	Rectangular	Plastic/Epoxy				Yes	4	BIPOLAR				Tape And Reel	5 V		Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.341 in (8.65 mm)
TS339MPT	STMicroelectronics	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
LM139P	STMicroelectronics	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	4	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TS864IYDT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	4	BICMOS	AEC-Q100	64 μA			5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TS3704IN	STMicroelectronics	Comparator	Automotive	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	No	4	CMOS		100 μA			3 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	600 pA	1.2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3			0.787 in (20 mm)
TS339CD	STMicroelectronics	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		3 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.5 µs	Open-Drain	0 °C (32 °F)	Tin/Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
JLM2901H-I6D1	STMicroelectronics	Comparator	Automotive	No Lead	14	DIE	Rectangular		0 V	15 mV	400 nA	Yes	4				0 V		5 V		Uncased Chip		Comparators	36 V		150 °C (302 °F)		1.3 µs		-40 °C (-40 °F)		Upper	R-XUUC-N14				No
LM2901HYDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	15 mV	400 nA	Yes	4		AEC-Q100	2.5 mA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	150 °C (302 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS3V339IPT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		100 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	600 pA	1.5 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TS864AIPT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	4	BICMOS		16 μA			5 V	2.7/10 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	12 V	0.026 in (0.65 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4			0.197 in (5 mm)
TS374D	STMicroelectronics	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	4	CMOS		1 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		600 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
TSX3704IPT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6 mV	1.2 nA	Yes	4	CMOS				Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		2.4 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
TSX3704IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6 mV	1.2 nA	Yes	4	CMOS				Tape And Reel	3 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.4 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.341 in (8.65 mm)
LM339AP	STMicroelectronics	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	4 mV	300 nA	Yes	4	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
LM339P	STMicroelectronics	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	4	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TS864AIDT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	600 pA	Yes	4	BICMOS		16 μA			5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
TS334IYPT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6 mV	100 nA	Yes	4		AEC-Q100			Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	40 nA	420 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
ESM1600B	STMicroelectronics	Comparator	Other	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V		5 uA	No	4	BIPOLAR		12 mA	0 V		35 V	35 V	In-Line	DIP14,.3	Comparators	45 V	0.1 in (2.54 mm)	85 °C (185 °F)			Open-Collector	-25 °C (-13 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
LM339EPT	STMicroelectronics	Comparator		Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy				Yes	4	BIPOLAR				Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
TS374IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	12 mV	300 pA	Yes	4	CMOS		1 mA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS3704IYD	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		25 μA	0 V		3 V	3/5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	600 pA	1.2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.341 in (8.65 mm)
TS339ID	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		3 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS374MN	STMicroelectronics	Comparator	Military	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	12 mV	300 pA	No	4	CMOS		1 mA	0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		600 ns	Open-Drain	-55 °C (-67 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
TS884IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6 mV	99 pA	Yes	4					Tape And Reel	1.2 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)		5.5 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.341 in (8.65 mm)
LM119DGBB	STMicroelectronics	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-25 V	7 mV	1 nA	Yes	2	BIPOLAR			-15 V		15 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TS339MN	STMicroelectronics	Comparator	Military	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	No	4	CMOS		100 μA	0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.5 µs	Open-Drain	-55 °C (-67 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
TS339IP	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		3 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TS3704IJ	STMicroelectronics	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Ceramic		5 mV		No	4	CMOS		80 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	105 °C (221 °F)		2.3 µs		-40 °C (-40 °F)	Tin/Lead	Dual	R-XDIP-T14				No	e0
LM139AP	STMicroelectronics	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	4 mV	300 nA	Yes	4	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TS3V3704ID	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		100 μA			3 V	2.7/16 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	600 pA	1.2 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
TS3704IP	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		3 V	3/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.2 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TS374N	STMicroelectronics	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		10 mV		No	4	CMOS		1 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		600 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
TS339CN	STMicroelectronics	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	No	4	CMOS		100 μA	0 V		3 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		1.5 µs	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
TS864ID	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		18 mV	600 pA	Yes	4	BICMOS					5 V	2.7/10 V	Small Outline	SOP14,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS3V3704IPT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		25 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	600 pA	1.2 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TS339MP	STMicroelectronics	Comparator	Military	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.5 µs	Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TS339MDT	STMicroelectronics	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.5 µs	Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
LM339DP	STMicroelectronics	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		9 mV	400 nA	No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.783 in (19.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.