5 Comparators 755

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV3701IDBV	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	1				0 V		5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	125 °C (257 °F)		240 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
PLV3601QDCKTQ1	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1			8 mA			3.3 V		Small Outline, Thin Profile, Shrink Pitch	TSOP5,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
LMV7275IDCKRQ1	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	100 nA	Yes	1	BICMOS	AEC-Q100	14 μA			2.7 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	1.1 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
LMV7275MG	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	4 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	1.8 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		260 °C (500 °F)	0.079 in (2 mm)
LMV331DBVRLR	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	1						2.7 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
LMV331QDCKR	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	1	BIPOLAR		100 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
TLV3401CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1			950 nA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LPV7215MGX	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS			0 V		2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3			0.079 in (2 mm)
LMC7225IM5	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.05 pA	22 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMC7221BIM5	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tape And Reel	5 V	2.7/15 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	16 V	0.038 in (0.953 mm)	85 °C (185 °F)	0.4 pA	7 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
TLV1391IDBV	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		150 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
LPV7215MG	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	2.9 mV		Yes	1	BICMOS		1.2 μA	0 V		2.7 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		260 °C (500 °F)	0.079 in (2 mm)
LMV7239QM7X/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV	600 nA	Yes	1	BIPOLAR	AEC-Q100	95 μA		Tape And Reel	5 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA	75 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
TLV3401CDBV	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1			950 nA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
TLV1391CDBV	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		150 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 nA	700 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
TLV7021DPWR	Texas Instruments	Comparator	Automotive	Bu	5	VBCC	Square	Plastic/Epoxy		8 mV	5 pA	Yes	1			10 μA			1.8 V		Chip Carrier, Very Thin Profile		Comparators	6 V	0.019 in (0.48 mm)	125 °C (257 °F)	5 pA	310 ns	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Bottom	S-PBCC-B5	1	0.016 in (0.4 mm)	0.031 in (0.8 mm)		e4		260 °C (500 °F)	0.031 in (0.8 mm)
TLV1391IDBVRG4	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		175 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LMV331QDCKRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	150 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
TLC371CY	Texas Instruments	Comparator	Commercial	No Lead	5	DIE				5 mV	100 pA	Yes	1	CMOS		150 μA			5 V		Uncased Chip					70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)		Upper	X-XUUC-N5				No
LMV7239QDBVRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		8 mV	600 nA	Yes	1	BIPOLAR	AEC-Q100	95 μA			5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)	400 nA	89 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLV4041R5DBVR	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy				Yes	1			5 μA		Tape And Reel	1.8 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		6 V	0.037 in (0.95 mm)	125 °C (257 °F)		360 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLV3401QDBVR	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1				0 V		2.7 V		Small Outline, Low Profile, Shrink Pitch		Comparators	17 V	0.037 in (0.95 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
LMV7239QM7	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR			0 V		2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)			Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
TLV3601QDCKRQ1	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1		AEC-Q100	7 mA		Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e4		260 °C (500 °F)	0.079 in (2 mm)
ADCMP600BRJ-RL	Analog Devices	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1					Tape And Reel			Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)		3 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e0			0.114 in (2.9 mm)
ADCMP370AKSZ-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel, 7 Inch		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
LT6703HVHS5-3#PBF	Analog Devices	Comparator	Automotive	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy			10 nA	Yes	1						5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	125 °C (257 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
ADCMP371AKS-RL	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	400 nA	Yes	1	CMOS		5 μA		Tape And Reel	3.3 V	2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		5 µs		-40 °C (-40 °F)	Tin/Lead (Sn85Pb15) - with Silver barrier	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP600XKSZ	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1								Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 ns	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3			0.079 in (2 mm)
ADCMP370AKS-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel, 7 Inch		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0		240 °C (464 °F)	0.079 in (2 mm)
ADCMP371AKS-REEL7	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel, 7 Inch		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP600BKS-RL	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1					Tape And Reel			Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP370AKS-REEL	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15) - with Silver barrier	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP370AKSZ-REEL	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
ADCMP371AKS-REEL	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		9 mV	50 nA	Yes	1			7 μA		Tape And Reel		2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		5 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP370AKS-R7	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	400 nA	Yes	1	CMOS		5 μA			3.3 V	2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15) - with Silver barrier	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP361ARJ	Analog Devices	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy			10 nA	Yes	1			10 μA			5 V	1.8/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)		18 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e0			0.114 in (2.9 mm)
ADCMP600XKS	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV	5 uA	Yes	1								Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead Over Silver	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
ADCMP370AKS-RL	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	400 nA	Yes	1	CMOS		5 μA		Tape And Reel	3.3 V	2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Tin/Lead (Sn85Pb15) - with Silver barrier	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
LTC6752HS5#TRPBF	Analog Devices	Comparator	Automotive	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy		8.5 mV	2.1 uA	Yes	1	CMOS		5.9 mA		Tape And Reel	2.5 V		Small Outline, Very Thin Profile, Shrink Pitch	TSOP5,.11,37	Comparators	3.6 V	0.037 in (0.95 mm)	125 °C (257 °F)	1.25 uA	2.9 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.039 in (1 mm)	0.064 in (1.625 mm)		e3			0.114 in (2.9 mm)
LT1716HS5#WPBF	Analog Devices	Comparator	Automotive	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy	-22 V	2.9 mV	1.4 mA	Yes	1		AEC-Q100	95 μA	-15 V		15 V		Small Outline, Very Thin Profile, Shrink Pitch	TSOP5/6,.11,38		22 V	0.037 in (0.95 mm)	125 °C (257 °F)	60 nA	5.5 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5		0.039 in (1 mm)	0.064 in (1.625 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
ADCMP361WRJZ-RL7	Analog Devices	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy			5 nA	Yes	1						3.3 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)		10 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e3			0.114 in (2.9 mm)
ADCMP371AKS-R7	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	400 nA	Yes	1	CMOS		5 μA			3.3 V	2.5/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		5 µs		-40 °C (-40 °F)	Tin/Lead (Sn85Pb15) - with Silver barrier	Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
LT6703HVIS5-2#PBF	Analog Devices	Comparator	Industrial	Gull Wing	5	VSSOP	Rectangular	Plastic/Epoxy			10 nA	Yes	1						5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9140AAXK+	Analog Devices	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		6 mV	350 nA	Yes	1	BIPOLAR					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)		40 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX919EUK+	Analog Devices	Comparator	Industrial	Gull Wing	5	TSOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1			1.6 μA				2/5 V	Small Outline, Thin Profile	TSOP5/6,.11,37	Comparators		0.037 in (0.95 mm)	85 °C (185 °F)	1 nA			-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1			No	e3	30 s	260 °C (500 °F)
MAX9050BEUK+TG55	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	25 uA	Yes	1						5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.064 in (1.625 mm)	No				0.114 in (2.9 mm)
MAX9075EXK+	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV		Yes	1			6.6 μA				2.1/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	20 nA	580 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1			No	e3	30 s	260 °C (500 °F)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.