6 Comparators 471

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MAX9010EXT+

Analog Devices

Comparator

Industrial

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

7 mV

2 uA

Yes

1

BIPOLAR

2.1 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

2 uA

10 ns

-40 °C (-40 °F)

Nickel Gold Palladium

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

30 s

260 °C (500 °F)

0.079 in (2 mm)

NCX2200GM,115

NXP Semiconductors

Comparator

Industrial

No Lead

6

VSON

Rectangular

Plastic/Epoxy

30 mV

Yes

1

9 μA

Tape And Reel, 7 Inch

1.6 V

1.6/5.5 V

Small Outline, Very Think Profile

SOLCC6,.04,20

Comparators

7 V

0.02 in (0.5 mm)

85 °C (185 °F)

800 ns

Push-Pull

-40 °C (-40 °F)

Tin

Dual

R-PDSO-N6

1

0.02 in (0.5 mm)

0.039 in (1 mm)

No

e3

30 s

260 °C (500 °F)

0.057 in (1.45 mm)

ADCMP604BKSZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LT6700HS6-1#TR

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT6700HVIS6-3#TRMPBF

Analog Devices

Comparator

Industrial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP606BKSZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

26 mA

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP606BKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

26 mA

Tape And Reel, 7 Inch

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP606BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

26 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LT6700CS6-3#PBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6700IDCB-3#TR

Analog Devices

Comparator

Industrial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e0

0.118 in (3 mm)

LT6700IDCB-3#TRM

Analog Devices

Comparator

Industrial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e0

0.118 in (3 mm)

LT6700IDCB-3#TRPBF

Analog Devices

Comparator

Industrial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX9109EUT-T

Maxim Integrated

Comparator

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

4 mV

350 nA

Yes

1

BIPOLAR

700 μA

5 V

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

350 nA

25 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

MAX9109EUT+T

Analog Devices

Comparator

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

4 mV

350 nA

Yes

1

BIPOLAR

700 μA

5 V

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

350 nA

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

NCX2200GM,132

NXP Semiconductors

Comparator

Industrial

No Lead

6

VSON

Rectangular

Plastic/Epoxy

30 mV

Yes

1

9 μA

Tape And Reel, 7 Inch

1.6 V

1.6/5.5 V

Small Outline, Very Think Profile

SOLCC6,.04,20

Comparators

7 V

0.02 in (0.5 mm)

85 °C (185 °F)

800 ns

Push-Pull

-40 °C (-40 °F)

Tin

Dual

R-PDSO-N6

1

0.02 in (0.5 mm)

0.039 in (1 mm)

No

e3

30 s

260 °C (500 °F)

0.057 in (1.45 mm)

TLV3603DCKR

Texas Instruments

Comparator

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

7.8 mA

Tape And Reel

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3603DCKR-ET

Texas Instruments

Comparator

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

10 mV

5 uA

Yes

1

7.8 mA

Tape And Reel

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

Push-Pull

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV6703DSER

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Rectangular

Plastic/Epoxy

2 mV

25 nA

Yes

1

13 μA

5 V

Small Outline, Very Think Profile

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

TLV6703QDSERQ1

Texas Instruments

Comparator

No Lead

6

VSON

Square

Plastic/Epoxy

2 mV

Yes

1

AEC-Q100

13 μA

Tape And Reel

5 V

Small Outline, Very Think Profile

SOLCC6,.06,20

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-N6

2

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

ADCMP604BKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

Tape And Reel, 7 Inch

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP608BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

1

CMOS

1.3 mA

Tape And Reel

2.5 V

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

60 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LT6700CS6-2#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6700HVCS6-3#TRMPBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6700HVIS6-1#TRMPBF

Analog Devices

Comparator

Industrial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6700MPDCB-3#TRPBF

Analog Devices

Comparator

Military

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-55 °C (-67 °F)

Matte Tin

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

NCS2200AMUT1G

Onsemi

Comparator

Industrial

No Lead

6

VSON

Rectangular

0 V

8 mV

Yes

1

CMOS

17 μA

0 V

Tape And Reel

3 V

1/5 V

Small Outline, Very Think Profile

SOLCC6,.04,16

Comparators

6 V

0.016 in (0.4 mm)

105 °C (221 °F)

1.1 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-XDSO-N6

1

0.022 in (0.55 mm)

0.039 in (1 mm)

No

e4

40

260 °C (500 °F)

0.047 in (1.2 mm)

NCS2201SN1T1G

Onsemi

Comparator

Industrial

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

8 mV

10 nA

Yes

1

CMOS

17 μA

3 V

1/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

105 °C (221 °F)

1.1 µs

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

TLV6703DDCT

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

3 mV

25 nA

Yes

1

13 μA

5 V

Small Outline, Thin Profile

Comparators

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP601BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP604BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LT6700CS6-2#PBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6700HDCB-1#TRMPBF

Analog Devices

Comparator

Automotive

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6700HS6-2

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT6700HS6-2#TR

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT6700HVHS6-2#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6700MPDCB-3#PBF

Analog Devices

Comparator

Military

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-55 °C (-67 °F)

Matte Tin - annealed

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6752HSC6-4#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

260 °C (500 °F)

0.079 in (2 mm)

LTC6752ISC6-4#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

MAX9028EBT-T

Maxim Integrated

Comparator

Industrial

Ball

6

VFBGA

Rectangular

Plastic/Epoxy

10 mV

2 nA

Yes

1

BICMOS

1.25 μA

5 V

5 V

Grid Array, Very Thin Profile, Fine Pitch

BGA6,2X3,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

1 nA

45 µs

Open-Drain

-40 °C (-40 °F)

Tin/Lead

Bottom

R-PBGA-B6

1

0.026 in (0.67 mm)

0.046 in (1.16 mm)

No

e0

0.062 in (1.57 mm)

MAX9028EBT+T

Analog Devices

Comparator

Industrial

Ball

6

VFBGA

Rectangular

Plastic/Epoxy

10 mV

2 nA

Yes

1

BICMOS

1.25 μA

Tape And Reel

5 V

5 V

Grid Array, Very Thin Profile, Fine Pitch

BGA6,2X3,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

1 nA

45 µs

Open-Drain

-40 °C (-40 °F)

Tin Silver Copper

Bottom

R-PBGA-B6

1

0.026 in (0.67 mm)

0.046 in (1.16 mm)

No

e1

30 s

260 °C (500 °F)

0.062 in (1.57 mm)

TLV3011AIDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

12 mV

10 pA

Yes

1

CMOS

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3011AIDBVTG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3011AIDCKR

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3011AIDCKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3011AQDBVRQ1

Texas Instruments

Comparator

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6 mV

10 pA

Yes

1

AEC-Q100

7 μA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3603QDCKRQ1

Texas Instruments

Comparator

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

AEC-Q100

7.8 mA

Tape And Reel

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3691IDPFR

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Square

Plastic/Epoxy

22 mV

20 nA

Yes

1

150 nA

Tape And Reel

0.9/6.5 V

Small Outline, Very Think Profile

SOLCC6,.04,14

Comparators

7 V

0.014 in (0.35 mm)

125 °C (257 °F)

100 pA

40 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-N6

1

0.016 in (0.4 mm)

0.039 in (1 mm)

No

e4

260 °C (500 °F)

0.039 in (1 mm)

TLV6713DDCR

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

2 mV

25 nA

Yes

1

11 μA

12 V

Small Outline, Thin Profile

Comparators

40 V

0.037 in (0.95 mm)

125 °C (257 °F)

25 nA

28.1 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.