SON Comparators 9

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TLV6700QDSERQ1

Texas Instruments

Comparator

Automotive

No Lead

6

SON

Square

Plastic/Epoxy

2 mV

15 nA

Yes

2

AEC-Q100

26 μA

Tape And Reel

5 V

Small Outline

SOLCC6,.06,20

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

15 nA

18 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-N6

2

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

NCX2222GTX

NXP Semiconductors

Comparator

Industrial

No Lead

8

SON

Rectangular

Plastic/Epoxy

30 mV

Yes

2

14 μA

Tape And Reel, 7 Inch

1.6/5.5 V

Small Outline

SOLCC8,.04,20

Comparators

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDSO-N8

1

No

260 °C (500 °F)

LTC1540IDD#TR

Analog Devices

Comparator

Industrial

No Lead

8

SON

Rectangular

Plastic/Epoxy

15 mV

Yes

1

CMOS

710 nA

Tape And Reel

±1/±5.5/2/11 V

Small Outline

SOLCC8,.11,20

Comparators

0.02 in (0.5 mm)

85 °C (185 °F)

70 µs

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-N8

No

e0

NCX2220GM,125

NXP Semiconductors

Comparator

Industrial

No Lead

8

SON

Rectangular

Plastic/Epoxy

30 mV

Yes

2

7 μA

Tape And Reel, 7 Inch

1.6/5.5 V

Small Outline

SOLCC8,.05,16

Comparators

0.016 in (0.4 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDSO-N8

1

No

30 s

260 °C (500 °F)

NCX2222GUX

NXP Semiconductors

Comparator

Industrial

No Lead

8

SON

Rectangular

Plastic/Epoxy

30 mV

Yes

2

14 μA

1.6/5.5 V

Small Outline

SOLCC8,.06,16

Comparators

0.016 in (0.4 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDSO-N8

1

No

260 °C (500 °F)

NCX2222GF

NXP Semiconductors

Comparator

Industrial

No Lead

8

SON

Rectangular

Plastic/Epoxy

30 mV

Yes

14 μA

1.6/5.5 V

Small Outline

SOLCC8,.04,14

Comparators

0.014 in (0.35 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin

Dual

R-PDSO-N8

1

No

e3

30 s

260 °C (500 °F)

TC75S58AFC(TE85L)

Toshiba

Comparator

Industrial

No Lead

6

SON

Rectangular

Plastic/Epoxy

7 mV

Yes

1

CMOS

22 μA

3/5 V

Small Outline

SOLCC6,.06,18

Comparators

0.018 in (0.45 mm)

85 °C (185 °F)

190 ns

-40 °C (-40 °F)

Dual

R-PDSO-N6

No

TC75S59AFC(TE85L)

Toshiba

Comparator

Industrial

No Lead

6

SON

Rectangular

Plastic/Epoxy

7 mV

Yes

1

CMOS

220 μA

3/5 V

Small Outline

SOLCC6,.06,18

Comparators

0.018 in (0.45 mm)

85 °C (185 °F)

170 ns

-40 °C (-40 °F)

Dual

R-PDSO-N6

No

TC75S201L6X(TE85L)

Toshiba

Comparator

Industrial

No Lead

6

SON

Rectangular

Plastic/Epoxy

6 mV

Yes

1

CMOS

44 μA

1.5/3 V

Small Outline

SOLCC6,.04,20

Comparators

0.02 in (0.5 mm)

85 °C (185 °F)

24 ns

-40 °C (-40 °F)

Dual

R-PDSO-N6

No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.