SOP Comparators 2,179

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Minimum Isolation Voltage	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
HA9P4905-5Z	Renesas Electronics	Comparator	Commercial Extended	Gull Wing	16	SOP	Rectangular		Plastic/Epoxy		10 mV	300 nA	Yes	4				-15 V		Tube	15 V		Small Outline		Comparators	33 V	0.05 in (1.27 mm)	75 °C (167 °F)		180 ns	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G16	3	0.104 in (2.65 mm)	0.295 in (7.5 mm)		e3	30 s	260 °C (500 °F)	0.406 in (10.3 mm)
LM111WG-SMD	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	4 mV	100 pA	Yes	1	BIPOLAR			-15 V			15 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Dual	R-CDSO-G10		0.092 in (2.33 mm)	0.241 in (6.12 mm)					0.27 in (6.86 mm)
LM3302M96	Intersil	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	40 mV	1 uA	Yes	4	BIPOLAR			0 V			5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
LM7211BIM5X	National Semiconductor	Comparator	Industrial	Gull Wing	5	SOP	Rectangular		Plastic/Epoxy		18 mV		Yes	1	CMOS						2.7 V		Small Outline			16 V		85 °C (185 °F)		8 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5				No
TA75393F	Toshiba	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	250 nA	Yes	2	BIPOLAR		2 mA	0 V			5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.075 in (1.9 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
CMP04FSZ	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	2 mV	200 nA	Yes	4	BIPOLAR		3 mA	0 V			5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	100 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.341 in (8.65 mm)
LTC1440IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS			0 V		Tape And Reel	3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LTC1843IS8#PBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV		Yes	2	CMOS						3 V		Small Outline		Comparators		0.05 in (1.27 mm)	85 °C (185 °F)		5 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MCP6544-I/SL	Microchip Technology	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	100 pA	Yes	4	CMOS		4 μA			Tube	5 V	1.6/5.5 V	Small Outline	SOP14,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.341 in (8.65 mm)
MCP6544T-I/SL	Microchip Technology	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	100 pA	Yes	4	CMOS		4 μA			Tape And Reel	5 V	1.6/5.5 V	Small Outline	SOP14,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.341 in (8.65 mm)
TLC339ID	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		80 μA			Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC3702MD	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA			Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702MDG4	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA			Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC3702MDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA			Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
UPC277G2-E1-A	Renesas Electronics	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	250 nA	Yes	1	BIPOLAR		1 mA				5 V		Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.071 in (1.8 mm)	0.173 in (4.4 mm)		e6			0.205 in (5.2 mm)
TLC393QDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	30 nA	Yes	2	CMOS		40 μA			Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV761MAX	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		1 mV	50 pA	Yes	1			700 μA				5 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 pA	225 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	235 °C (455 °F)	0.193 in (4.9 mm)
TLC3704MDR	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-18 V	5 mV	30 nA	Yes	4	CMOS		80 μA			Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV339IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA				5 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLC393CPS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	600 pA	Yes	2	CMOS		40 μA				5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LMV393DR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	2			250 μA				2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TLV3402QDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1				0 V			2.7 V		Small Outline		Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
LM119WGRLQMLV	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular	100k Rad(Si)	Plastic/Epoxy	-18 V	6.8 mV	5 uA	Yes	1	BIPOLAR		11 mA	-15 V			15 V	±15 V	Small Outline	SOP10,.4	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-PDSO-G10	1	0.092 in (2.33 mm)	0.241 in (6.12 mm)	No	e0			0.27 in (6.86 mm)
LM393APSRE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		4 mV	-400 nA	Yes	2	BIPOLAR		2.5 mA				5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LP311D	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-18 V	7.5 mV	150 nA	Yes	1	BIPOLAR		300 μA	-15 V		Tube	15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV7211AIDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	8 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V		Tape And Reel	5 V	3/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.04 pA	10 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
5962-554901NXDR	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	20 nA	Yes	2	CMOS						5 V		Small Outline			18 V	0.05 in (1.27 mm)	125 °C (257 °F)		650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL331ID	Texas Instruments	Comparator	Other	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	9 mV	-300 nA	Yes	1	BIPOLAR		800 μA	0 V			5 V	5/30 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TLC371CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	1	CMOS		200 μA				5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL3116CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-7 V	3 mV	1.2 uA	Yes	1	BIPOLAR		14.7 mA	-5 V		Tube	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM3302DG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR						5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM2901AVQDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		2 mV	500 nA	Yes	4	BIPOLAR		2.5 mA			Tape And Reel	5 V	5 V	Small Outline	SOP14,.24	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLV3404ID	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			2.56 μA	0 V		Tube	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLV1393IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		350 μA				3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
PAMC23C12QDWVRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes	1		AEC-Q100	2.2 mA				3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		290 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC22C11DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			2.2 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
PAMC23C11DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			3.7 mA				5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC23C12DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			4.3 mA				5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC23C14DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	2			2.2 mA				3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC23C10DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			3.6 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		230 ns	Open-Drain, Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC22C12DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			2.2 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
PAMC22C12QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1		AEC-Q100	2.2 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
AMC23C14DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	2			2.2 mA		750 V		3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC22C11QDRQ1	Texas Instruments	Comparator			8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1		AEC-Q100	2.2 mA		560 V	Tape And Reel, 13 Inch	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
PAMC22C11QDRQ1	Texas Instruments	Comparator			8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1		AEC-Q100	2.2 mA				3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
AMC23C14DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	2			2.2 mA		750 V		3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
LM2903BTQDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA			Tape And Reel	5 V		Small Outline	SOP8,.25		36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
AMC23C12DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			4.3 mA		750 V		5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.