Automotive Comparators 1,339

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MAX9647AUK+T

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

400 nA

Yes

1

BICMOS

170 μA

2.7 V

1.8/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

115 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MAX40009ANT+

Analog Devices

Comparator

Automotive

Ball

6

VFBGA

Rectangular

Plastic/Epoxy

5 mV

140 nA

No

1

17 μA

Tape And Reel

3.3 V

Grid Array, Very Thin Profile, Fine Pitch

BGA6,2X3,20

Comparators

6 V

0.014 in (0.35 mm)

125 °C (257 °F)

Push-Pull

-40 °C (-40 °F)

Tin Silver Copper Nickel

Bottom

R-PBGA-B6

1

0.02 in (0.5 mm)

0.029 in (0.727 mm)

e2

30 s

260 °C (500 °F)

0.042 in (1.077 mm)

LM2901VDTBR2

Onsemi

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

4

BIPOLAR

2 mA

0 V

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LM2903VDG

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.193 in (4.9 mm)

NCV2903DR2

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

0 V

5 V

±1/±18/2/36 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

LM2901VN

Onsemi

Comparator

Automotive

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

No

4

BIPOLAR

2.5 mA

0 V

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T14

0.185 in (4.69 mm)

0.3 in (7.62 mm)

No

e0

235 °C (455 °F)

0.743 in (18.86 mm)

LM2903VD

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

LM2903VNG

Onsemi

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

15 mV

500 nA

No

2

BIPOLAR

2.5 mA

5 V

5 V

In-Line

DIP8,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDIP-T8

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

40

260 °C (500 °F)

0.365 in (9.27 mm)

NCV2901DR2G

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2903VN

Onsemi

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

No

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

In-Line

DIP8,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

0.175 in (4.45 mm)

0.3 in (7.62 mm)

No

e0

235 °C (455 °F)

0.385 in (9.78 mm)

NCV2202SN2T1G

Onsemi

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

Yes

1

CMOS

AEC-Q100

17 μA

Tape And Reel

3 V

1/5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

1.1 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2901VD

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.341 in (8.65 mm)

NCV2252SQ2T2G

Onsemi

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

1 nA

Yes

1

AEC-Q100

250 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

90 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

TS393DR2G

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

600 pA

Yes

2

CMOS

AEC-Q100

3 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

2.1 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

NCS3402DR2G

Onsemi

Comparator

Automotive

Gull Wing

8

LSOP

Rectangular

Plastic/Epoxy

4.4 mV

3 nA

Yes

2

950 nA

5 V

2.7/15 V

Small Outline, Low Profile

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 pA

220 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.061 in (1.55 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903VDR2

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

NCV2903DMR2

Onsemi

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

0 V

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

30 s

235 °C (455 °F)

0.118 in (3 mm)

NCV2901DR2

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.341 in (8.65 mm)

NCV2901CTR

Onsemi

Comparator

Automotive

No Lead

DIE

15 mV

500 nA

Yes

4

BIPOLAR

5 V

Uncased Chip

Comparators

36 V

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Upper

X-XUUC-N

No

e3

NCV2200AMUTBG

Onsemi

Comparator

Automotive

No Lead

6

VSON

Rectangular

Plastic/Epoxy

8 mV

Yes

1

CMOS

AEC-Q100

17 μA

Tape And Reel

3 V

Small Outline, Very Think Profile

SOLCC6,.04,16

Comparators

6 V

0.016 in (0.4 mm)

125 °C (257 °F)

1.1 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-N6

1

0.022 in (0.55 mm)

0.039 in (1 mm)

e4

30 s

260 °C (500 °F)

0.047 in (1.2 mm)

SCY99246SQ2T2G

Onsemi

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

6 mV

1 nA

Yes

1

250 μA

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSOP5/6,.08,25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

90 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

NCS2252SQ2T2G

Onsemi

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

1 nA

Yes

1

250 μA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

90 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

CM001IS02

Onsemi

Comparator

Automotive

5 mV

1

CMOS

5 V

Comparators

5.5 V

125 °C (257 °F)

-40 °C (-40 °F)

No

NCV2393DR2G

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

600 pA

Yes

2

CMOS

3 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

2.1 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LA6393AT

Onsemi

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

Yes

2

BIPOLAR

1 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

0.025 in (0.635 mm)

125 °C (257 °F)

250 nA

1.3 µs

-40 °C (-40 °F)

Dual

R-PDSO-G8

No

MDNCV2200AMUTBG

Onsemi

Comparator

Automotive

No Lead

6

VSON

Rectangular

Plastic/Epoxy

0.012 µV

Yes

1

CMOS

17 μA

Tape And Reel

3 V

Small Outline, Very Think Profile

SOLCC6,.04,16

Comparators

6 V

0.016 in (0.4 mm)

125 °C (257 °F)

750 ns

Open-Drain, Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-N6

1

0.022 in (0.55 mm)

0.039 in (1 mm)

40

260 °C (500 °F)

0.047 in (1.2 mm)

LM2901VNG

Onsemi

Comparator

Automotive

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

15 mV

500 nA

No

4

BIPOLAR

2.5 mA

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDIP-T14

0.185 in (4.69 mm)

0.3 in (7.62 mm)

No

e3

260 °C (500 °F)

0.743 in (18.86 mm)

NCS2202AMUTBG

Onsemi

Comparator

Automotive

No Lead

6

VSON

Rectangular

Plastic/Epoxy

12 mV

Yes

1

CMOS

17 μA

Tape And Reel

2.85 V

1/5 V

Small Outline, Very Think Profile

SOLCC6,.04,16

Comparators

6 V

0.016 in (0.4 mm)

125 °C (257 °F)

1 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-N6

1

0.022 in (0.55 mm)

0.039 in (1 mm)

No

e4

0.047 in (1.2 mm)

NCV331SN3T1G

Onsemi

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

Yes

1

CMOS

AEC-Q100

100 μA

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

800 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LA6393AM

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

Yes

2

BIPOLAR

1 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

-40 °C (-40 °F)

Dual

R-PDSO-G8

No

NCV2903VDR2G

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

150 °C (302 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TS884IQ4T

STMicroelectronics

Comparator

Automotive

No Lead

16

HVQCCN

Square

6 mV

99 pA

Yes

1

Tape And Reel

1.2 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5.5 µs

Push-Pull

-40 °C (-40 °F)

Quad

S-XQCC-N16

0.039 in (1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

TS3702IN

STMicroelectronics

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

No

2

CMOS

50 μA

3 V

±1.35/±8/2.7/16 V

In-Line

DIP8,.3

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1.5 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T8

0.189 in (4.8 mm)

0.3 in (7.62 mm)

No

e3

0.386 in (9.8 mm)

TSX339IPT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

6 mV

1.2 nA

Yes

4

CMOS

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TS332IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6 mV

100 nA

Yes

2

38 μA

Tape And Reel

1.8 V

1.8/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

420 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TSX3702IQ2T

STMicroelectronics

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

6 mV

1.2 nA

Yes

2

CMOS

Tape And Reel

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18 V

0.02 in (0.5 mm)

125 °C (257 °F)

2.4 µs

Push-Pull

-40 °C (-40 °F)

Dual

S-PDSO-N8

0.024 in (0.6 mm)

0.079 in (2 mm)

0.079 in (2 mm)

TSX339IYPT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

6 mV

1.2 nA

Yes

4

CMOS

AEC-Q100

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

RT2903HYDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

400 nA

Yes

2

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

150 °C (302 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

TSX3704IYPT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

6 mV

1.2 nA

Yes

4

CMOS

AEC-Q100

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

2.4 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

LM2903YD

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

400 nA

Yes

2

BIPOLAR

AEC-Q100

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

TSX393IPT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

6 mV

1.2 nA

Yes

2

CMOS

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

0.173 in (4.4 mm)

TSX393IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6 mV

1.2 nA

Yes

2

CMOS

Tape And Reel

3 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

TSX339IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

6 mV

1.2 nA

Yes

4

CMOS

Tape And Reel

3 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

2.5 µs

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.341 in (8.65 mm)

TS374ID

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

12 mV

300 pA

Yes

4

CMOS

1 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

600 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

40

260 °C (500 °F)

0.341 in (8.65 mm)

TS3704ID

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

100 μA

3 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

600 pA

1.2 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

40

260 °C (500 °F)

0.341 in (8.65 mm)

TS3021AILT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

2 mV

300 nA

Yes

1

Tape And Reel

3.3 V

Small Outline, Low Profile, Shrink Pitch

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

50 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

TS882IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6 mV

99 pA

Yes

2

1 μA

1.2 V

1.2/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

5.5 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

TS3V3704IDT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

25 μA

3 V

3/5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

600 pA

1.2 µs

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.