Commercial Comparators 1,788

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LT6700CS6-2#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2				Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	70 °C (158 °F)		29 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LT6700HVCS6-3#TRMPBF	Analog Devices	Comparator	Commercial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2				Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	70 °C (158 °F)		29 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX924CPE+	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS	9 μA			3 V	3/5 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)	0.755 in (19.175 mm)
MAX924CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS	9 μA			3 V	3/5 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.175 mm)
MAX944CSD	Maxim Integrated	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR	2.4 mA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)		80 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		245 °C (473 °F)	0.341 in (8.65 mm)
MAX944CSD+	Analog Devices	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR	600 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX944CSD-T	Maxim Integrated	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR	600 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX944CSD+T	Analog Devices	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR	600 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX9963BGCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9963BGCCQ+TD	Analog Devices	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin - annealed	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3	30 s	260 °C (500 °F)	0.551 in (14 mm)
TLC3702CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS	50 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV3704CPW	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS	3.2 μA	0 V	Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TS3704CDT	STMicroelectronics	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS	100 μA		Tape And Reel	3 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.2 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
LM311J8	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic	-18 V	10 mV	300 nA	No	1	BIPOLAR	7.5 mA	-15 V		15 V		In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	200 ns	Open-Collector	0 °C (32 °F)		Dual	R-CDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.405 in (10.287 mm)
LM311J-8	National Semiconductor	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		10 mV	300 nA	No	1	BIPOLAR	7.5 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	200 ns		0 °C (32 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
LM319AM/NOPB	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	1 uA	Yes	2	BIPOLAR	12.5 mA	-15 V	Tube	15 V	±15 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	1 uA	80 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.341 in (8.65 mm)
LM319MWA	National Semiconductor	Comparator	Commercial							8 mV			2	BIPOLAR		-15 V		15 V	±15 V		WAFER	Comparators			70 °C (158 °F)	1 uA	80 ns		0 °C (32 °F)				1			No		40	260 °C (500 °F)
LM393PWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	-400 nA	Yes	2	BIPOLAR	1 mA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	50 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.173 in (4.4 mm)
LM393PWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR	2.5 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	25 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LP311DRE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	150 nA	Yes	1	BIPOLAR		-15 V		15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector, Open-Emitter	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LP311DRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-18 V	10 mV	150 nA	Yes	1	BIPOLAR	300 μA	-15 V	Tape And Reel	15 V	±15 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector, Open-Emitter	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LP339DRE4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR	100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	25 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LT1018CS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	100 nA	Yes	2			0 V		4.5 V		Small Outline		Comparators	40 V	0.05 in (1.27 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LT311AN8	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	2 mV	150 nA	No	1	BIPOLAR	4 mA	-15 V		15 V		In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	100 nA	200 ns	Open-Collector	0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T8		0.155 in (3.937 mm)	0.3 in (7.62 mm)		e0			0.4 in (10.16 mm)
LT311AN8#PBF	Linear Technology	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	2 mV	150 nA	No	1	BIPOLAR	4 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	150 nA	200 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8		0.155 in (3.937 mm)	0.3 in (7.62 mm)	No	e3
LT6700CS6-2#PBF	Analog Devices	Comparator	Commercial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2					5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	70 °C (158 °F)		29 µs	Open-Collector	0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX942CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	BIPOLAR	1.2 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)		80 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX942CSA+	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	2	BIPOLAR	600 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9963BGCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
NE521DR2G	Onsemi	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-7 V	10 mV	40 uA	Yes	2	BIPOLAR	35 mA	-5 V		5 V	±5 V	Small Outline	SOP14,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 uA	9.6 ns	Totem Pole	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
NJM339D	New Japan Radio	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		5 mV	250 nA	No	4	BIPOLAR	2.5 mA			5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Tin Bismuth	Dual	R-PDIP-T14		0.185 in (4.7 mm)	0.3 in (7.62 mm)	No	e6			0.748 in (19 mm)
NJM339E-(TE2)	New Japan Radio	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		5 mV	250 nA	Yes	4	BIPOLAR	2.5 mA			5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Tin Bismuth	Dual	R-PDSO-G14		0.075 in (1.9 mm)	0.154 in (3.9 mm)	No	e6			0.343 in (8.7 mm)
TLC374CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS	800 μA			5 V	5/10 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLC393CPW	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV	600 pA	Yes	2	CMOS	40 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV3401CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1		640 nA	0 V	Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	100 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV3401CDBVR	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1		640 nA	0 V	Tape And Reel	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	70 °C (158 °F)	100 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4		260 °C (500 °F)	0.114 in (2.9 mm)
TLV3401CDR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1		950 nA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
LM361N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-16 V	5 mV	30 pA	No	1	BIPOLAR		-10 V		10 V	5,±10 V	In-Line	DIP14,.3	Comparators	16 V	0.1 in (2.54 mm)	70 °C (158 °F)	30 pA	14 ns	Totem Pole	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.18 mm)
LM393PS	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	9 mV	-400 nA	Yes	2	BIPOLAR	2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
LM393PSLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR	2.5 mA			5 V	5 V	Small Outline	SOP8,.3	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
LT1018CN8#PBF	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	100 nA	No	2			0 V		4.5 V		In-Line		Comparators	40 V	0.1 in (2.54 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8	1	0.155 in (3.937 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)
LT1116CS8#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	20 uA	Yes	1			-5 V	Tape And Reel	5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		12 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LT1671CMS8#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-7 V	4 mV	350 nA	Yes	1			-5 V	Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		85 ns		0 °C (32 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.046 in (1.17 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LT1671CS8#PBF	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	4 mV	350 nA	Yes	1			-5 V		5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		85 ns		0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9025 mm)
LT1714CGN	Analog Devices	Comparator	Commercial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy	-6.3 V	4 mV	5 uA	Yes	2		18 mA	-5 V		5 V		Small Outline, Shrink Pitch		Comparators	6.3 V	0.025 in (0.635 mm)	70 °C (158 °F)	2 uA	8.5 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16		0.068 in (1.727 mm)	0.154 in (3.899 mm)	No	e0			0.192 in (4.889 mm)
LT1719CS6#TR	Analog Devices	Comparator	Commercial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy		3.5 mV	0 uA	Yes	1	BIPOLAR			Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	7 V	0.037 in (0.95 mm)	70 °C (158 °F)		7 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
LT1721CGN#PBF	Analog Devices	Comparator	Commercial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		4.5 mV	-6 uA	Yes	4	BIPOLAR				5 V		Small Outline, Shrink Pitch		Comparators	7 V	0.025 in (0.635 mm)	70 °C (158 °F)		7 ns	Push-Pull	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9116 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX907CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	Yes	2	BIPOLAR	1.2 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.