Industrial Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX976EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS	1.3 mA		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	20 s	240 °C (464 °F)	0.118 in (3 mm)
MAX9107EKA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		4 mV	350 nA	Yes	2	BIPOLAR	700 μA		5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	350 nA	25 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
MAX922EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS	4 μA		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX909ESA+T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	3 mV	500 nA	Yes	1	BIPOLAR	1.8 mA	0 V	5 V	5 V	Small Outline	SOP8,.25	Comparators	13 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX987ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1	BIPOLAR	96 μA	0 V	2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX970EEE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		10 mV	50 nA	Yes	4	CMOS	18 μA		3 V	1.5/5.5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.89 mm)
MAX9687ESE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	7 mV	30 uA	Yes	2	BIPOLAR		-5 V	5 V	5,-5.2 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA		Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1			No	e0
MAX9692EUB-T	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1		36 mA	-5.2 V	5 V	5,-5.2 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9040AEUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1		72 μA		5 V	2.5/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	10 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
MAX982EPA+	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2		5.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)	0.369 in (9.375 mm)
MAX974EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4		8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX9051AESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1				5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
TC75S59FE(TPL3)	Toshiba	Comparator	Industrial	Flat	5	DFP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA			3/5 V	Flatpack	FL5/6,.047,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		170 ns		-40 °C (-40 °F)		Dual	R-PDFP-F5				No
TC75S57FU	Toshiba	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		7 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
TA7523S	Toshiba	Comparator	Industrial	Through-Hole	7	SIP	Rectangular	Plastic/Epoxy	0 V	7 mV	250 nA	No	1	BIPOLAR	3 mA	0 V	5 V	±18 V	In-Line	SIP7,.05	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Single	R-PSIP-T7		0.311 in (7.9 mm)	0.126 in (3.2 mm)	No	e0			0.677 in (17.2 mm)
TC75S57FU(TE85L)	Toshiba	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)		11 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5				No
TA75S393F,LF(T	Toshiba	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	1	BIPOLAR	800 μA	0 V	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,38	Comparators	36 V	0.037 in (0.95 mm)	85 °C (185 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5	1	0.055 in (1.4 mm)	0.063 in (1.6 mm)			10 s	260 °C (500 °F)	0.114 in (2.9 mm)
TC75S70L6X,LF(S	Toshiba	Comparator	Industrial	Butt	6	VFLGA	Rectangular	Plastic/Epoxy		6 mV		Yes	1	CMOS			1.5 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		20 ns	Push-Pull	-40 °C (-40 °F)		Bottom	R-PBGA-B6		0.022 in (0.55 mm)	0.039 in (1 mm)			30 s	260 °C (500 °F)	0.057 in (1.45 mm)
TC75S57F(TE85L)	Toshiba	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV		Yes	1	CMOS	220 μA	0 V	3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)		7 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.055 in (1.4 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
TC75S57FE(TPL3,F)	Toshiba	Comparator	Industrial	Flat	5	DFP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA			3/5 V	Flatpack	FL5/6,.047,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		11 ns		-40 °C (-40 °F)		Dual	R-PDFP-F5				No
TA75339FB	Toshiba	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	50 nA	Yes	4	BIPOLAR	2 mA	0 V	5 V	5/±15 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G14		0.073 in (1.85 mm)	0.173 in (4.4 mm)	No	e0			0.343 in (8.7 mm)
TA7522F	Toshiba	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	-2 uA	Yes	2	BIPOLAR	7 mA		6 V	3 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 uA		Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8		0.075 in (1.9 mm)	0.173 in (4.4 mm)	No	e0			0.197 in (5 mm)
TC75W57FU(TE12L,F)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS	440 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)		7 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TC75S201L6X	Toshiba	Comparator	Industrial	Butt	6	VBCC	Rectangular			6 mV		Yes	1	CMOS			1.8 V		Chip Carrier, Very Thin Profile		Comparators	4.6 V	0.02 in (0.5 mm)	85 °C (185 °F)		26 ns	Push-Pull	-40 °C (-40 °F)		Bottom	R-XBCC-B6		0.022 in (0.55 mm)	0.039 in (1 mm)					0.057 in (1.45 mm)
TC75W57FK(TE85L)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS	440 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		7 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TC75S57FE(TE85L,F)	Toshiba	Comparator	Industrial	Flat	5	DFP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA			3/5 V	Flatpack	FL5/6,.047,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		11 ns		-40 °C (-40 °F)		Dual	R-PDFP-F5				No
TC75W70L8X	Toshiba	Comparator	Industrial	Butt	8	VFLGA	Square	Plastic/Epoxy		6 mV		Yes	2	CMOS			1.5 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		20 ns	Push-Pull	-40 °C (-40 °F)		Bottom	S-PBGA-B8		0.022 in (0.55 mm)	0.063 in (1.6 mm)					0.063 in (1.6 mm)
TC75S57FE	Toshiba	Comparator	Industrial	Flat	5	VSOF	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA		3 V	3/5 V	Small Outline, Very Think Profile	FL6,.047,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		8 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-F5		0.024 in (0.6 mm)	0.047 in (1.2 mm)	No	e0			0.063 in (1.6 mm)
TC75W56FK(TE85L.F)	Toshiba	Comparator	Industrial	Gull Wing	8	VSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV		Yes	2	CMOS		0 V	3 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.035 in (0.9 mm)	0.079 in (2 mm)					0.091 in (2.3 mm)
TC75W70L8X,LF(S	Toshiba	Comparator	Industrial	Butt	8	VFLGA	Square	Plastic/Epoxy		6 mV		Yes	2	CMOS			1.5 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		20 ns	Push-Pull	-40 °C (-40 °F)		Bottom	S-PBGA-B8		0.022 in (0.55 mm)	0.063 in (1.6 mm)					0.063 in (1.6 mm)
TC75W59FU	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.16	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		170 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)	No				0.114 in (2.9 mm)
TC75S59FU(TE85L)	Toshiba	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)		170 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5				No
TC75S59F(TE85L,F)	Toshiba	Comparator	Industrial	Gull Wing	5	TSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA			3/5 V	Small Outline, Thin Profile	TSOP5/6,.11,37	Comparators		0.037 in (0.95 mm)	85 °C (185 °F)		170 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5				No
TC75W59FU(TE12L)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS	440 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)		170 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TC75S56FU	Toshiba	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	22 μA		3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
TC75S57F	Toshiba	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	220 μA		3 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)		7 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.055 in (1.4 mm)	0.063 in (1.6 mm)	No		30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TA7522S	Toshiba	Comparator	Industrial	Through-Hole	9	SIP	Rectangular	Plastic/Epoxy		10 mV	-2 uA	No	2	BIPOLAR	7 mA		6 V	3 V	In-Line	SIP9,.1	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 uA		Open-Collector	-40 °C (-40 °F)	Tin Lead	Single	R-PSIP-T9		0.311 in (7.9 mm)	0.126 in (3.2 mm)	No	e0			0.877 in (22.28 mm)
TC75W58FK(TE85L,F)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS	44 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.12,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		190 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TC75S70L6X	Toshiba	Comparator	Industrial	Butt	6	VFLGA	Rectangular	Plastic/Epoxy		6 mV		Yes	1	CMOS			1.5 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		20 ns	Push-Pull	-40 °C (-40 °F)		Bottom	R-PBGA-B6		0.022 in (0.55 mm)	0.039 in (1 mm)			30 s	260 °C (500 °F)	0.057 in (1.45 mm)
TC75W56FU	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV		Yes	2	CMOS	44 μA	0 V	3 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.16	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)	No				0.114 in (2.9 mm)
TC75W56L8X(TE85L)	Toshiba	Comparator	Industrial	No Lead	8	QCCN	Square	Plastic/Epoxy		7 mV		Yes	2	CMOS	44 μA			3/5 V	Chip Carrier	LCC8,.06SQ,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		8 ns		-40 °C (-40 °F)		Quad	S-PQCC-N8				No
TC75S58FE(TPL3,F)	Toshiba	Comparator	Industrial	Flat	5	DFP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	22 μA			3/5 V	Flatpack	FL5/6,.047,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		190 ns		-40 °C (-40 °F)		Dual	R-PDFP-F5				No
TA75339P	Toshiba	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	5 mV	50 nA	No	4	BIPOLAR	2 mA	0 V	5 V	5/±15 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T14		0.175 in (4.45 mm)	0.3 in (7.62 mm)	No	e0			0.758 in (19.25 mm)
TC75S58F(TE85L)	Toshiba	Comparator	Industrial	Gull Wing	5	TSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	22 μA			3/5 V	Small Outline, Thin Profile	TSOP5/6,.11,37	Comparators		0.037 in (0.95 mm)	85 °C (185 °F)		190 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5				No
TA75339AP	Toshiba	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV	250 nA	No	4	BIPOLAR	22 mA	0 V	5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T14		0.175 in (4.45 mm)	0.3 in (7.62 mm)	No	e0			0.758 in (19.25 mm)
TC75W57FU(TE12L)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS	440 μA			3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)		7 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TC75S58AFE(TE85L)	Toshiba	Comparator	Industrial	Flat	5	DFP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS	22 μA			3/5 V	Flatpack	FL5/6,.047,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		190 ns		-40 °C (-40 °F)		Dual	R-PDFP-F5				No
TC75W57FU	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	2	CMOS			3 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.16	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		8 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)	No				0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.