Gull Wing Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX9095ASD+T	Analog Devices	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV		Yes	4	BICMOS	500 μA				1.8/5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	120 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1			No	e3	30 s	260 °C (500 °F)
MAX9966BJCCQ	Analog Devices	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9042AEUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	10 nA	Yes	2	BIPOLAR	85 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9032AUA+T	Analog Devices	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	5 mV	80 nA	Yes	2		110 μA	0 V		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	80 nA		Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9094AUD+	Analog Devices	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4	BICMOS	500 μA			2.7 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	115 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.197 in (5 mm)
MAX9013EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		5.5 mV	2 uA	Yes	1	BIPOLAR				5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX974CSE+T	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4		8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3
MAX516ACWG+T	Analog Devices	Comparator	Commercial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy		10 mV	400 nA	Yes	4	CMOS	10 mA			4.75 V	5/15 V	Small Outline	SOP24,.4	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G24	1			No	e3	30 s	260 °C (500 °F)
MAX9034ASD+T	Analog Devices	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	5 mV	80 nA	Yes	4		220 μA	0 V		5 V	3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	80 nA		Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX902CSD+	Analog Devices	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	2	CMOS	12 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX40003AUK+T	Analog Devices	Comparator		Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		32 mV	90 nA	Yes	1	BICMOS	1.3 μA		Tape And Reel	3.3 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)		55 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX921CSA+	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1	CMOS	4 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1			No	e3	30 s	260 °C (500 °F)
MAX9120ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV	2 nA	Yes	1		1.2 μA	0 V		5 V	2/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	45 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9109EUT+	Analog Devices	Comparator	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		4 mV	350 nA	Yes	1	BIPOLAR				5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		25 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9092AUA+	Analog Devices	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	400 nA	Yes	2	BICMOS	300 μA			2.7 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	115 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9971ACCS	Analog Devices	Comparator	Commercial	Gull Wing	80	HTFQFP	Square	Plastic/Epoxy	-6.25 V	10 mV	100 uA	Yes	4	BICMOS		-5 V		8 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			9.4 V	0.02 in (0.5 mm)	70 °C (158 °F)		2 ns	Open-Drain	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G80	3	0.047 in (1.2 mm)	0.472 in (12 mm)	No	e0			0.472 in (12 mm)
MAX9203ESA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	7.5 mV	7 uA	Yes	1	BIPOLAR		-5 V		5 V	±5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	5 uA	7 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9077ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		8 mV	-20 nA	Yes	2		6.6 μA			5 V	2.1/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 nA	580 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX985ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1	BIPOLAR	24 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9647AUK+	Analog Devices	Comparator	Automotive	Gull Wing	5	TSOP	Rectangular	Plastic/Epoxy		9 mV		Yes	1	BICMOS	170 μA				1.8/5 V	Small Outline, Thin Profile	TSOP5/6,.11,37	Comparators		0.037 in (0.95 mm)	125 °C (257 °F)	250 nA	120 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1			No	e3	30 s	260 °C (500 °F)
MAX9094ASD+T	Analog Devices	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV		Yes	4	BICMOS	500 μA				1.8/5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	120 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1			No	e3	30 s	260 °C (500 °F)
MAX9973HCCB+	Analog Devices	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin - annealed	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e3			0.394 in (10 mm)
MAX997ESA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		2 mV	15 uA	Yes	1	CMOS	6.5 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX978ESD	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy				Yes	4	CMOS	1.2 mA			5 V		Small Outline		Comparators			85 °C (185 °F)				-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1			No	e0
MAX917EUK+	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1					5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		95 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX992ESA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS	192 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9972BCCS+	Analog Devices	Comparator	Commercial	Gull Wing	80	HTFQFP	Square	Plastic/Epoxy	-6.25 V	100 mV	100 uA	Yes	4	BICMOS		-5 V		8 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			9.4 V	0.02 in (0.5 mm)	70 °C (158 °F)		2 ns	Open-Drain	0 °C (32 °F)	Matte Tin - annealed	Quad	S-PQFP-G80	3	0.047 in (1.2 mm)	0.472 in (12 mm)	No	e3			0.472 in (12 mm)
MAX40008AUT+T	Analog Devices	Comparator	Automotive	Gull Wing	6	SSOP	Rectangular	Plastic/Epoxy		5 mV	140 nA	Yes	1		17 μA		Tape And Reel	3.3 V		Small Outline, Shrink Pitch	SOP6,.11	Comparators	6 V	0.037 in (0.95 mm)	125 °C (257 °F)			Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9962BGCCQ	Analog Devices	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX924MSE/PR-T	Analog Devices	Comparator	Military	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4		11 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	125 °C (257 °F)		14 µs		-55 °C (-67 °F)		Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.39 in (9.9 mm)
MAX9973GCCB	Analog Devices	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS		-4.75 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e0			0.394 in (10 mm)
MAX9967BQCCQ	Analog Devices	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9077EKA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		8 mV	-20 nA	Yes	2		6.6 μA			5 V	2.1/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	20 nA	580 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9092AKA+	Analog Devices	Comparator	Automotive	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	2	BICMOS	300 μA			2.7 V	1.8/5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	115 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX985EUK+	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1		24 μA			2.7 V	±1.5/±2.5/3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX903CSA+	Analog Devices	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	1	CMOS	6 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP8,.3	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX962EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		4.5 mV	30 uA	Yes	2	CMOS	18 mA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	15 uA	4.5 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9022AKA+T	Analog Devices	Comparator	Automotive	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	2		5 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	80 nA	8 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX9022ASA+	Analog Devices	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	2		10 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)		8 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX995ESD+	Analog Devices	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4		96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	210 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX9965AGCCQ	Analog Devices	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V		25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX974ESE+T	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4		8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G16	1			No	e3	30 s	260 °C (500 °F)
MAX9050AEUK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1					5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX988EXK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	1		96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	210 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX976EUA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		3 mV	300 nA	Yes	2	CMOS	650 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9041AEUT+T	Analog Devices	Comparator	Industrial	Gull Wing	6	LSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1					5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		400 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX989EUA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS	48 μA	0 V		5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	300 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin - annealed	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
MAX9600EUP+T	Analog Devices	Comparator	Industrial	Gull Wing	20	TSSOP	Rectangular	Plastic/Epoxy	-6 V	9 mV	20 uA	Yes	2	BIPOLAR		-5.2 V		5 V		Small Outline, Thin Profile, Shrink Pitch			6 V	0.026 in (0.65 mm)	85 °C (185 °F)			Open-Emitter	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G20	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e3	30 s	260 °C (500 °F)	0.256 in (6.5 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.