Maxim Integrated Comparators 1,031

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LMX339HASD	Maxim Integrated	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4	CMOS		430 μA		2.7 V	3/5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	500 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		245 °C (473 °F)	0.341 in (8.65 mm)
MAX9051AESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	1			72 μA		5 V	2.7/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 nA	450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9685MTW-4	Maxim Integrated	Comparator	Military	Wire	10		Round	Metal		8 mV				BIPOLAR		62 mA			5,-5.2 V	Cylindrical	CAN10,.23	Comparators			125 °C (257 °F)	20 uA	1.7 ns		-55 °C (-67 °F)	Tin/Lead	Bottom	O-MBCY-W10				No	e0
MAX9064EUK/V+	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	1	BICMOS	AEC-Q100	1.1 μA		3.3 V	3.3 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX901ACSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS		25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	6 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9961BDCCQ	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX974ESE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4			8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1			No	e0	20 s	240 °C (464 °F)
MAX9018AEKA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS		2.8 μA		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	31 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.057 in (1.45 mm)	0.064 in (1.625 mm)	No				0.114 in (2.9 mm)
MAX995EUD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	4	BIPOLAR		96 μA	0 V	2.7 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		210 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.043 in (1.1 mm)	0.173 in (4.4 mm)	No	e0		245 °C (473 °F)	0.197 in (5 mm)
MAX978EEE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	CMOS		2.6 mA		5 V	3/5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	300 nA	28 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		245 °C (473 °F)	0.193 in (4.89 mm)
MAX974CSE-T	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4			8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP16,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16				No	e0
MAX9698CJE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Ceramic, Glass-Sealed	-6 V	3 mV	25 uA	No	2	BIPOLAR		50 mA	-5 V	5 V	±5 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-GDIP-T16	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
MAX9967BLCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3	30 s	260 °C (500 °F)	0.551 in (14 mm)
MAX9017BEKA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS		2.8 μA		5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	28 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No				0.114 in (2.9 mm)
MAX911CAG	Maxim Integrated	Comparator	Commercial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy	-6 V	5 mV	8 uA	Yes	1			30 mA	-5 V	5 V	±5 V	Small Outline	SSOP24,.3	Comparators	6 V	0.025 in (0.635 mm)	70 °C (158 °F)	6 uA	8 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G24				No	e0
MAX9061EBS+T	Maxim Integrated	Comparator	Industrial	Ball	4	FBGA	Square	Plastic/Epoxy		9 mV		Yes		BICMOS				1.8 V	1.8 V	Grid Array, Fine Pitch	BGA4,2X2,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)				-40 °C (-40 °F)	Matte Tin	Bottom	S-PBGA-B4	1			No	e3
MAX9963BJCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX901BESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	4	CMOS		25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9692EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	No	1			36 mA	-5.2 V	5 V	5,-5.2 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.175 mm)
LMX393AKA+T	Maxim Integrated	Comparator	Automotive	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		7 mV	4 nA	Yes	2	CMOS		300 μA		2.7 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	600 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX901BCSE-T	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	4	CMOS		25 mA	-5 V	5 V	5,5/10,GND/-5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX972CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	2			3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1			No	e0
MAX9967BGCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9961ALCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX900AEPP	Maxim Integrated	Comparator	Industrial	Through-Hole	20	DIP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	No	4	CMOS		25 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP20,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	6 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T20	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			1.03 in (26.16 mm)
MAX903CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	No	1	CMOS		6 mA	-5 V	5 V	5,5/10,GND/-5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX941EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		3 mV	400 nA	No	1	BIPOLAR		700 μA		3 V	3/5 V	In-Line	DIP8,.3	Comparators	6.5 V	0.1 in (2.54 mm)	85 °C (185 °F)		80 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX974ESE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	4			8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16				No	e0
MAX974CPE+	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4			8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)
MAX9967BMCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Emitter	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX984CPE+	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4			8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e3	30 s	260 °C (500 °F)
MAX916CSE	Maxim Integrated	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	15 uA	Yes	2	CMOS		44 mA	-5 V	5 V	5/±5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G16		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.39 in (9.9 mm)
MAX9686CTW	Maxim Integrated	Comparator	Commercial	Wire	10		Round	Metal		3 mV			1	BIPOLAR		25 mA	-5 V	5 V	±5 V	Cylindrical	CAN10,.23	Comparators			70 °C (158 °F)	25 uA	6 ns		0 °C (32 °F)	Tin/Lead	Bottom	O-MBCY-W10					e0
MAX9967ALCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	20 mV	25 uA	Yes	2	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX990EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	CMOS		48 μA	0 V	5 V	±1.5/±2.5/3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	10 nA	300 ns	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX516BENG	Maxim Integrated	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		15 mV	400 nA	No	4	CMOS		10 mA		4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX9117EXK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	10 mV	2 nA	Yes	1			1.3 μA	0 V	5 V	2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	40 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e0			0.079 in (2 mm)
MXL1016CS8-C60349+	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	Yes	1				-5 V	5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		10 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
MAX972C/D	Maxim Integrated	Comparator	Commercial	No Lead	8	DIE	Rectangular			10 mV		Yes	2	CMOS		3.2 μA		5 V		Uncased Chip		Comparators	12 V		70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N8	1			No	e0
MAX9698BCPE	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	No	1	BIPOLAR			-5 V	5 V		In-Line		Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)		6 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.18 in (4.572 mm)	0.3 in (7.62 mm)		e0			0.369 in (9.375 mm)
MAX921CSA-G05	Maxim Integrated	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1			4 μA		3 V		Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
MAX9973HCCB	Maxim Integrated	Comparator	Commercial	Gull Wing	64	HTFQFP	Square	Plastic/Epoxy	-6 V	50 mV		Yes	1	BICMOS			-4.75 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11 V	0.02 in (0.5 mm)	70 °C (158 °F)		1.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G64	3	0.047 in (1.2 mm)	0.394 in (10 mm)	No	e0			0.394 in (10 mm)
MAX9018AEKA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS		2.8 μA		5 V	5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	31 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0	20 s	240 °C (464 °F)	0.114 in (2.9 mm)
MAX989EKA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	2					5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)					0.114 in (2.9 mm)
MAX971CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	1			3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8				No	e0
MAX981CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Square	Plastic/Epoxy	0 V	10 mV		Yes	1			3.8 μA	0 V	3 V	±1.25/±5.5/2.5/11 V	Small Outline	TSSOP8,.19	Comparators	12 V	0.025 in (0.635 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1			No	e0
MAX942C/D	Maxim Integrated	Comparator	Commercial	No Lead	8	DIE	Rectangular			2 mV		Yes	2	CMOS				3 V		Uncased Chip		Comparators	7 V		70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Upper	R-XUUC-N8	1			No	e0
MAX9964BGCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR			-5.25 V	9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.