Maxim Integrated Comparators 1,031

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX9961BDCCQ+D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX907EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	2	BIPOLAR	1.2 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX982CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0
MAX965EUA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	50 nA	Yes	1	CMOS	12 μA			3 V	1.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9686BCSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	25 uA	Yes	1	BIPOLAR		-5 V		5 V		Small Outline		Comparators	6 V		70 °C (158 °F)		6 ns		0 °C (32 °F)		Dual	R-PDSO-G8
MAX9101ESA+T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		20 mV	30 nA	Yes	1	BICMOS	13 μA			5 V	1/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 nA		Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.193 in (4.9 mm)
MAX9109EXT	Maxim Integrated	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		4 mV		Yes	1	BIPOLAR	700 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	350 nA			-40 °C (-40 °F)		Dual	R-PDSO-G6				No
MAX9065AEWS+TCNB	Maxim Integrated	Comparator	Industrial	Ball	4	VFBGA	Square	Plastic/Epoxy				Yes	1	BICMOS	1.35 μA			3.3 V		Grid Array, Very Thin Profile, Fine Pitch	BGA4,2X2,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		25 µs	Push-Pull	-40 °C (-40 °F)	Tin Silver Copper Nickel	Bottom	S-PBGA-B4	1	0.027 in (0.69 mm)	0.04 in (1.009 mm)		e2	30 s	260 °C (500 °F)	0.04 in (1.009 mm)
MAX905EPD	Maxim Integrated	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	10 uA	No	1		24 mA	-5 V		5 V	5/GND,-5/-5.2 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	10 uA	2 ns		-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T14		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX9100ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		20 mV	30 nA	Yes	1	BICMOS	13 μA			5 V	1/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	15 nA		Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9030AXT-T	Maxim Integrated	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy	0 V	5 mV	80 nA	Yes	1		55 μA	0 V		5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	80 nA		Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4			0.079 in (2 mm)
MAX9022ASA	Maxim Integrated	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	2		10 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)		8 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9038BABT+T	Maxim Integrated	Comparator	Industrial	Ball	6	VFBGA	Rectangular	Plastic/Epoxy		9 mV	25 nA	Yes	1	CMOS				5 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)		450 ns	Open-Drain	-40 °C (-40 °F)	Tin Silver Copper	Bottom	R-PBGA-B6	1	0.026 in (0.67 mm)	0.041 in (1.05 mm)		e1	30 s	260 °C (500 °F)	0.062 in (1.57 mm)
MAX9142ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		4.5 mV	320 nA	Yes	2	BIPOLAR	300 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	320 nA	40 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX977EEE-T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SSOP	Rectangular	Plastic/Epoxy		3 mV	-400 nA	Yes	2	CMOS	6 μA			5 V	3/5 V	Small Outline, Shrink Pitch	SSOP16,.25	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	400 nA	28 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.89 mm)
MAX9692EUB	Maxim Integrated	Comparator	Industrial	Gull Wing	10	TSSOP	Square	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	1		36 mA	-5.2 V		5 V	5,-5.2 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP10,.19,20	Comparators	6 V	0.02 in (0.5 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G10	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX915CSA-T	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	1.4 mV	15 uA	Yes	1	CMOS	22 mA	-5 V		5 V		Small Outline			6 V	0.05 in (1.27 mm)	70 °C (158 °F)		6 ns		0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
MAX972EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2		3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX970ESD	Maxim Integrated	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	4	CMOS	18 μA			3 V	1.5/5.5 V	Small Outline	SOP14,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX923MSA/PR	Maxim Integrated	Comparator	Military	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2		7.5 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	125 °C (257 °F)		14 µs		-55 °C (-67 °F)		Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
MAX516BMRG	Maxim Integrated	Comparator	Military	Through-Hole	24	DIP	Rectangular	Ceramic, Glass-Sealed		15 mV	400 nA	No	4	CMOS	10 mA			4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	125 °C (257 °F)	300 nA	800 ns		-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T24	1			No	e0	20 s	240 °C (464 °F)
MAX922CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	4 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9690ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	7 mV	30 uA	Yes	1	BIPOLAR		-5.2 V		5 V	5,-5.2 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns		-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8	1			No	e0
MAX923CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS	6 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9052AESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	10 nA	Yes	2					5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		450 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	245 °C (473 °F)	0.193 in (4.9 mm)
MAX969ESE	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	4	CMOS	22 μA			3 V	1.5/5.5 V	Small Outline	SOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.39 in (9.9 mm)
MAX921CUA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	-0.3 V	10 mV		Yes	1	CMOS	4 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	12 V	0.026 in (0.65 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0	20 s	240 °C (464 °F)	0.118 in (3 mm)
MAX9685MJE	Maxim Integrated	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic, Glass-Sealed	-6 V	8 mV	40 uA	No	1	ECL	36 mA	-5.2 V		5 V	5,-5.2 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 uA	1.5 ns		-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T16				No	e0
MAX9967BGCCQ+TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3			0.551 in (14 mm)
MAX919ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1		1.6 μA			5 V	2/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	1 nA	95 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX901BMSE/PR	Maxim Integrated	Comparator																				Comparators								Matte Tin			1				e3	30 s	260 °C (500 °F)
MAX9018AEKA+TG0N	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS	2.8 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	31 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)		e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX965EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	50 nA	Yes	1	CMOS	12 μA			3 V	1.5/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	50 nA	20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9963AGCCQ-D	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	15 mV	25 uA	Yes	4	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX967ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		7 mV	50 nA	Yes	2					3 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX923MJA	Maxim Integrated	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Metal-Sealed Cofired	-0.3 V	10 mV		No	2	CMOS	8 μA			3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	125 °C (257 °F)		14 µs		-55 °C (-67 °F)	Tin Lead	Dual	R-CDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
MAX9967BLCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	2	BIPOLAR		-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch			11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100		0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX911EAG	Maxim Integrated	Comparator	Industrial	Gull Wing	24	SOP	Rectangular	Plastic/Epoxy	-6 V	5 mV	6 uA	Yes	1		30 mA	-5 V		5 V	±5 V	Small Outline	SSOP24,.3	Comparators	6 V	0.025 in (0.635 mm)	85 °C (185 °F)	6 uA	5 ns		-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G24				No	e0
MAX9693EEE+T	Maxim Integrated	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-6 V	11.5 mV	30 uA	Yes	2		50 mA	-5.2 V		5 V	5,-5.2 V	Small Outline	SSOP16,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 uA	2 ns	Open-Emitter	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3			0.39 in (9.9 mm)
MAX973CSA	Maxim Integrated	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0	20 s	240 °C (464 °F)
MAX983ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	10 mV		Yes	2		5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1			No	e0
MAX900AEWP-T	Maxim Integrated	Comparator	Industrial	Gull Wing	20	SOP	Rectangular	Plastic/Epoxy	-6 V	3 mV	10 uA	Yes	4	CMOS	25 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP20,.4	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	6 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G20		0.104 in (2.65 mm)	0.295 in (7.5 mm)	No	e0			0.504 in (12.8 mm)
MAX991EKA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	10 nA	Yes	2	BIPOLAR	96 μA	0 V		2.7 V	±1.5/±2.5/3/5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		210 ns	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
MAX967EUA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		15 mV	50 nA	Yes	2					3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		20 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e0			0.118 in (3 mm)
MAX9142ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		4.5 mV	320 nA	Yes	2	BIPOLAR	300 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	320 nA	40 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX9022AKA	Maxim Integrated	Comparator	Automotive	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	80 nA	Yes	2		5 μA	0 V		5 V	±1.25/±2.75/2.5/5.5 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	80 nA	8 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0			0.114 in (2.9 mm)
MAX921CSA-TG05	Maxim Integrated	Comparator																				Comparators											1
MAX911ENG	Maxim Integrated	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy	-6 V	5 mV	6 uA	No	1		30 mA	-5 V		5 V	±5 V	In-Line	DIP24,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	6 uA	5 ns		-40 °C (-40 °F)	Tin/Lead	Dual	R-PDIP-T24		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.