STMicroelectronics Comparators 431

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM193WN	STMicroelectronics	Comparator	Military	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	9 mV	400 nA	No	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Matte Tin	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e3			0.365 in (9.27 mm)
TS862AIPT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		10 mV	600 pA	Yes	2	BICMOS		16 μA		Tape And Reel	5 V	2.7/10 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	12 V	0.026 in (0.65 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4			0.173 in (4.4 mm)
LM293AYD	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	4 mV	300 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)	100 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
TS332IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6 mV	100 nA	Yes	2			38 μA		Tape And Reel	1.8 V	1.8/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		420 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TS374MDT	STMicroelectronics	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	12 mV	300 pA	Yes	4	CMOS		1 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		600 ns	Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
TSM109AN	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	9 mV	400 nA	No	2			2.5 mA	0 V		5 V	2/36 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.189 in (4.8 mm)	0.3 in (7.62 mm)	No	e3
TS339IJ	STMicroelectronics	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Ceramic		5 mV		No	4	CMOS		80 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	105 °C (221 °F)		2.9 µs		-40 °C (-40 °F)	Tin/Lead	Dual	R-XDIP-T14				No	e0
LM139APT	STMicroelectronics	Comparator	Military	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		4 mV	300 nA	Yes	4	BIPOLAR		2.5 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	32 V	0.026 in (0.65 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TS3704MN	STMicroelectronics	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	4	CMOS		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	600 pA	1.2 µs	Push-Pull	-55 °C (-67 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3			0.787 in (20 mm)
TSX3702IQ2T	STMicroelectronics	Comparator	Automotive	No Lead	8	HVSON	Square		Plastic/Epoxy		6 mV	1.2 nA	Yes	2	CMOS				Tape And Reel	3 V		Small Outline, Heat Sink/Slug, Very Thin Profile		Comparators	18 V	0.02 in (0.5 mm)	125 °C (257 °F)		2.4 µs	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-N8		0.024 in (0.6 mm)	0.079 in (2 mm)					0.079 in (2 mm)
TSX339IYPT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6 mV	1.2 nA	Yes	4	CMOS	AEC-Q100			Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
TS7221BILT	STMicroelectronics	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		18 mV	600 pA	Yes	1	BICMOS		16 μA		Tape And Reel	5 V	2.7/10 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	85 °C (185 °F)	300 pA	2 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LM2901FP	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		15 mV		Yes		BIPOLAR		2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14				No	e0
RT2903HYDT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		15 mV	400 nA	Yes	2						5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	150 °C (302 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
TS339CPT	STMicroelectronics	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V	Tape And Reel	3 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		1.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TS862AIN	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV	600 pA	No	2	BICMOS					5 V	2.7/10 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3
TSX3704IYPT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6 mV	1.2 nA	Yes	4	CMOS	AEC-Q100			Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	2.4 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
LM393WD	STMicroelectronics	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
RHF801K1	STMicroelectronics	Comparator	Military	Flat	8	DFP	Square		Ceramic, Metal-Sealed Cofired		7 mV		Yes	1	BICMOS					3.3 V		Flatpack		Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)		11 ns		-55 °C (-67 °F)		Dual	S-CDFP-F8		0.104 in (2.64 mm)	0.255 in (6.48 mm)					0.255 in (6.48 mm)
LM2903YD	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		15 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100				5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
LM339FP	STMicroelectronics	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		9 mV		Yes		BIPOLAR		2 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)	250 nA	1.3 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14				No	e0
TSX393IPT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		6 mV	1.2 nA	Yes	2	CMOS				Tape And Reel	3 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LM393AJ	STMicroelectronics	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	0 V	4 mV	300 nA	No	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	100 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-CDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
LM139PT	STMicroelectronics	Comparator	Military	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		2.5 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	32 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TS3704MDT	STMicroelectronics	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.2 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
TSX393IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6 mV	1.2 nA	Yes	2	CMOS				Tape And Reel	3 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
TSX339IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6 mV	1.2 nA	Yes	4	CMOS				Tape And Reel	3 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.341 in (8.65 mm)
TS7221AI1LT	STMicroelectronics	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		10 mV	300 pA	Yes	1	BICMOS				Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	12 V	0.037 in (0.95 mm)	105 °C (221 °F)		2 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
TS374ID	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	12 mV	300 pA	Yes	4	CMOS		1 mA	0 V		5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS861AIN	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV	600 pA	No	1	BICMOS					5 V	2.7/10 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 pA	2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3
TS985IJT	STMicroelectronics	Comparator	Industrial	Ball	6	VFBGA	Rectangular		Plastic/Epoxy		9 mV	100 nA	Yes	1					Tape And Reel	2.7 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	5.5 V	0.016 in (0.4 mm)	85 °C (185 °F)		860 ns	Push-Pull	-40 °C (-40 °F)		Bottom	R-PBGA-B6		0.022 in (0.57 mm)	0.031 in (0.8 mm)					0.047 in (1.2 mm)
TS3704ID	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		100 μA			3 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	600 pA	1.2 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	40	260 °C (500 °F)	0.341 in (8.65 mm)
TS3021AILT	STMicroelectronics	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		2 mV	300 nA	Yes	1					Tape And Reel	3.3 V		Small Outline, Low Profile, Shrink Pitch		Comparators	5.5 V	0.037 in (0.95 mm)	125 °C (257 °F)		50 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
TS7221AILT	STMicroelectronics	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		10 mV	600 pA	Yes	1	BICMOS		16 μA		Tape And Reel	5 V	2.7/10 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	12 V	0.037 in (0.95 mm)	85 °C (185 °F)	300 pA	2 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
5968R1021501VXC	STMicroelectronics	Comparator		Flat	8	DFP	Square	100k Rad(Si)	Ceramic, Metal-Sealed Cofired		8 mV	5 uA	Yes	1	BICMOS	MIL-PRF-38535 Class V				3.3 V		Flatpack	FL8,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	5 uA	8.1 ns		-55 °C (-67 °F)		Dual	S-CDFP-F8		0.104 in (2.64 mm)	0.255 in (6.48 mm)					0.255 in (6.48 mm)
TS882IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6 mV	99 pA	Yes	2			1 μA			1.2 V	1.2/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)	10 pA	5.5 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
5962R1021501VXC	STMicroelectronics	Comparator	Military	Flat	8	DFP	Square	100k Rad(Si)			8 mV		Yes	1		MIL-PRF-38535 Class V	2.5 mA			3.3 V		Flatpack		Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	S-XDFP-F8		0.104 in (2.64 mm)	0.255 in (6.48 mm)	Yes				0.255 in (6.48 mm)
TS3V3704IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		25 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	600 pA	1.2 µs	Push-Pull	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
LM293AYDT	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	4 mV	300 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA	0 V		5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)	100 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
LM2903WPT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		15 mV	400 nA	Yes	2						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LM293J	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	0 V	9 mV	400 nA	No	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-CDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
LM293AJ	STMicroelectronics	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	0 V	4 mV	300 nA	No	2	BIPOLAR		2.5 mA	0 V		5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	105 °C (221 °F)	100 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-CDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
RT2901HYDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		15 mV	400 nA	Yes	4	BIPOLAR					5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	150 °C (302 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.341 in (8.65 mm)
TS883IST	STMicroelectronics	Comparator		Gull Wing	8	TSSOP	Square		Plastic/Epoxy		6 mV	100 pA	Yes	2			1.26 μA		Tape And Reel	1.2 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	10 pA	20 µs	Open-Drain	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
LM119DT	STMicroelectronics	Comparator	Military	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	-25 V	7 mV	1 nA	Yes	2	BIPOLAR			-15 V		15 V	±15 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.341 in (8.65 mm)
TS374MJ	STMicroelectronics	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Metal-Sealed Cofired		10 mV		No	4	CMOS		1 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	12 V	0.1 in (2.54 mm)	125 °C (257 °F)		600 ns		-55 °C (-67 °F)	Tin Lead	Dual	R-CDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
TSM109AD	STMicroelectronics	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	9 mV	400 nA	Yes	2			2.5 mA	0 V		5 V	2/36 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	1.3 µs		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
TS3704CPT	STMicroelectronics	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA	0 V		3 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		1.2 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.