Texas Instruments Comparators 2,400+

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TLV1704AMPWTPSEP

Texas Instruments

Comparator

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2.5 mV

20 nA

Yes

4

BIPOLAR

Small Outline, Thin Profile, Shrink Pitch

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV3491AIDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

1

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3603DCKR

Texas Instruments

Comparator

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

7.8 mA

Tape And Reel

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

2.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3603DCKR-ET

Texas Instruments

Comparator

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

10 mV

5 uA

Yes

1

7.8 mA

Tape And Reel

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

Push-Pull

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3702ID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV6703DSER

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Rectangular

Plastic/Epoxy

2 mV

25 nA

Yes

1

13 μA

5 V

Small Outline, Very Think Profile

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

TLV6703QDSERQ1

Texas Instruments

Comparator

No Lead

6

VSON

Square

Plastic/Epoxy

2 mV

Yes

1

AEC-Q100

13 μA

Tape And Reel

5 V

Small Outline, Very Think Profile

SOLCC6,.06,20

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Dual

S-PDSO-N6

2

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

TLV7041QDBVRQ1

Texas Instruments

Comparator

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

Yes

1

AEC-Q100

900 nA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

2 pA

3 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM111J-8/NOPB

Texas Instruments

Comparator

Military

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

-18 V

4 mV

150 nA

No

1

BIPOLAR

-15 V

15 V

In-Line

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

200 ns

Open-Collector

-55 °C (-67 °F)

Dual

R-GDIP-T8

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

LM193JGB

Texas Instruments

Comparator

Military

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

9 mV

-300 nA

No

2

BIPOLAR

MIL-STD-883

2.5 mA

Tube

5 V

5 V

In-Line

DIP8,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

100 nA

1.3 µs

Open-Collector, Open-Drain

-55 °C (-67 °F)

Tin/Lead

Dual

R-GDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.377 in (9.58 mm)

LM393PWE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5/30 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LMC7215QIM5/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 mV

0.05 pA

Yes

1

CMOS

AEC-Q100

1 μA

Tape And Reel

5 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

10 V

0.037 in (0.95 mm)

85 °C (185 °F)

0.05 pA

12.2 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

LMH7322SQX/NOPB

Texas Instruments

Comparator

Automotive

No Lead

24

HVQCCN

Square

8 mV

Yes

2

5 V

2.7/5/12 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Comparators

13.2 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.783 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N24

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

LMV7239M5

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

600 nA

Yes

1

BIPOLAR

95 μA

0 V

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.038 in (0.953 mm)

85 °C (185 °F)

400 nA

68 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.047 in (1.19 mm)

0.063 in (1.6 mm)

No

e0

260 °C (500 °F)

0.115 in (2.92 mm)

LMV7271MG/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

14 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

100 nA

1.8 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

PTLV7011DPWR

Texas Instruments

Comparator

Automotive

Butt

5

HVBCC

Square

Plastic/Epoxy

800 uV

5 pA

Yes

1

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

5 V

125 °C (257 °F)

350 ns

-40 °C (-40 °F)

Bottom

S-PBCC-B5

0.016 in (0.4 mm)

0.031 in (0.8 mm)

0.031 in (0.8 mm)

PTLV7034PWR

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

2 pA

Yes

4

3 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TLC3702CDG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

2

CMOS

50 μA

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

600 pA

2.7 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV2354IPWLE

Texas Instruments

Comparator

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

4

CMOS

800 μA

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

8 V

0.026 in (0.65 mm)

85 °C (185 °F)

2 nA

640 ns

Open-Drain

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.197 in (5 mm)

TLV3401IDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3704CPW

Texas Instruments

Comparator

Commercial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

4

CMOS

3.2 μA

0 V

Tube

2.7 V

±1.25/±8/2.5/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

17 V

0.026 in (0.65 mm)

70 °C (158 °F)

100 pA

240 µs

Push-Pull

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV4021R2YKAR

Texas Instruments

Comparator

Automotive

Ball

4

VFBGA

Square

Yes

1

5 μA

Tape And Reel

1.8 V

Grid Array, Very Thin Profile, Fine Pitch

BGA4,2X2,14

Comparators

6 V

0.014 in (0.35 mm)

125 °C (257 °F)

360 ns

Open-Drain

-40 °C (-40 °F)

Tin/Silver/Copper

Bottom

S-XBGA-B4

1

0.016 in (0.4 mm)

0.029 in (0.73 mm)

e1

260 °C (500 °F)

0.029 in (0.73 mm)

TLV6703DDCT

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

3 mV

25 nA

Yes

1

13 μA

5 V

Small Outline, Thin Profile

Comparators

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

25 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV7031DPWR

Texas Instruments

Comparator

Automotive

Bu

5

VBCC

Square

Plastic/Epoxy

8 mV

2 pA

Yes

1

900 nA

1.8 V

Chip Carrier, Very Thin Profile

Comparators

7 V

0.019 in (0.48 mm)

125 °C (257 °F)

2 pA

4.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Bottom

S-PBCC-B5

1

0.016 in (0.4 mm)

0.031 in (0.8 mm)

e4

0.031 in (0.8 mm)

TLV7042DSGR

Texas Instruments

Comparator

Automotive

8 mV

2 pA

2

1.5 μA

125 °C (257 °F)

2 pA

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

1

e4

30 s

260 °C (500 °F)

TLV9022DGKR

Texas Instruments

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2 mV

Yes

2

70 μA

Tape And Reel, 13 Inch

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

150 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

260 °C (500 °F)

0.118 in (3 mm)

UA710MJ

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic

No

BIPOLAR

12,-6 V

In-Line

DIP14,.3

Comparators

0.1 in (2.54 mm)

125 °C (257 °F)

-55 °C (-67 °F)

Dual

R-XDIP-T14

No

5962-8765901CA

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

10 mV

20 nA

No

4

CMOS

MIL-STD-883

600 μA

Tube

5 V

4/10 V

In-Line

DIP14,.3

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

30 pA

650 ns

Open-Collector, Open-Drain

-55 °C (-67 °F)

Tin/Lead

Dual

R-GDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

Yes

e0

0.77 in (19.56 mm)

5962-8765902CA

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

10 mV

30 nA

No

4

CMOS

MIL-STD-883

80 μA

Tube

5 V

4/10 V

In-Line

DIP14,.3

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

30 pA

2.5 µs

Open-Collector, Open-Drain

-55 °C (-67 °F)

Tin/Lead

Dual

R-GDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

Yes

e0

0.785 in (19.94 mm)

LM119J-SMD

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

100k Rad(Si)

Ceramic, Glass-Sealed

-18 V

3.8 mV

475 nA

No

2

BIPOLAR

38535Q/M;38534H;883B

11 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP14,.3

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

500 nA

80 ns

Open-Collector

-55 °C (-67 °F)

Tin/Lead

Dual

R-GDIP-T14

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.765 in (19.43 mm)

LM193AHRLQMLV

Texas Instruments

Comparator

Military

Wire

8

TO-99

Round

MIL-PRF-38535 Class V

Metal

4 mV

-1 nA

No

2

BIPOLAR

MIL-PRF-38535 Class V

1 mA

5 V

5 V

Cylindrical

CAN8,.2

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

100 nA

700 ns

Open-Collector, Open-Drain

-55 °C (-67 °F)

Tin/Lead

Bottom

O-MBCY-W8

1

0.225 in (5.72 mm)

0.357 in (9.08 mm)

No

e0

0.357 in (9.08 mm)

LM239DG4

Texas Instruments

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tube

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2901VQPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LM2903QPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/30 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LM319AM/NOPB

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

1 uA

Yes

2

BIPOLAR

12.5 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1 uA

80 ns

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LM393PWG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LM393PWLE

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

25 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

No

0.173 in (4.4 mm)

LMC6772AIMM

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

8 mV

0.4 pA

Yes

2

CMOS

20 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

85 °C (185 °F)

0.4 pA

4 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

LMC6772QMM

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

13 mV

Yes

2

CMOS

0 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

40

260 °C (500 °F)

0.118 in (3 mm)

LMC6772QMMX

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

13 mV

Yes

2

CMOS

0 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

40

260 °C (500 °F)

0.118 in (3 mm)

LMC7211BIM5

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

18 mV

0.4 pA

Yes

1

CMOS

12 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

16 V

0.037 in (0.95 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e0

260 °C (500 °F)

0.114 in (2.9 mm)

LMC7221AIMX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

8 mV

0.04 pA

Yes

1

CMOS

14 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline

SOP8,.25

Comparators

16 V

0.05 in (1.27 mm)

85 °C (185 °F)

0.4 pA

7 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.753 mm)

0.154 in (3.899 mm)

No

e3

260 °C (500 °F)

0.193 in (4.902 mm)

LMV339IPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

400 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LMV393IDE4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

250 μA

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV7239QM7/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

600 nA

Yes

1

BIPOLAR

AEC-Q100

95 μA

Tape And Reel

5 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

75 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LMV7275MFX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

14 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

100 nA

1.8 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.115 in (2.92 mm)

LMV762MAX

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

1.4 mA

5 V

2.7/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

235 °C (455 °F)

0.193 in (4.9 mm)

LP211DR

Texas Instruments

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

7.5 mV

150 nA

Yes

1

BIPOLAR

300 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

100 nA

1.2 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.