Comparators

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LMV7235M5/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

600 nA

Yes

1

BIPOLAR

95 μA

0 V

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.038 in (0.953 mm)

85 °C (185 °F)

400 nA

68 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.115 in (2.92 mm)

MCP6562-E/SN

Microchip Technology

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

260 μA

Tube

1.8 V

2/5 V

Small Outline

SOP8,.25

Comparators

6.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.193 in (4.9 mm)

LP339MX/NOPB

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

25 nA

Yes

4

BIPOLAR

100 μA

0 V

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

25 nA

8 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.91 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LT6700CS6-1#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

AD8561AR-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel, 7 Inch

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

LM393ST

STMicroelectronics

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

0 V

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1716IS5#TRM

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

-22 V

2.4 mV

1.4 mA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

22 V

0.037 in (0.95 mm)

85 °C (185 °F)

5.5 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT1719CS6#PBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

3.5 mV

0 uA

Yes

1

BIPOLAR

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

7 V

0.037 in (0.95 mm)

70 °C (158 °F)

7 ns

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM139J/PB

Texas Instruments

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

9 mV

300 nA

No

4

BIPOLAR

2 mA

Tube

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

300 nA

1.3 µs

Open-Collector

-55 °C (-67 °F)

Tin/Lead

Dual

R-GDIP-T14

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.77 in (19.56 mm)

LT6703HDC-3#TRMPBF

Analog Devices

Comparator

Automotive

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LT6703HVIS5-3#PBF

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

AD8611ARMZ-R2

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8611ARZ-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

Tape And Reel

3 V

3/5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLC372ID

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

2

CMOS

300 μA

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

30 pA

650 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LMV7271MGX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

14 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

100 nA

1.8 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LMV7291MG

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

6 mV

100 nA

Yes

1

BICMOS

14 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

100 nA

1.8 µs

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

260 °C (500 °F)

0.079 in (2 mm)

LT1715HMS#PBF

Analog Devices

Comparator

Automotive

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

-7 V

4 mV

-7 uA

Yes

2

BIPOLAR

-5 V

5 V

Small Outline

Comparators

7 V

0.02 in (0.5 mm)

125 °C (257 °F)

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT6703IDC-2#TRMPBF

Analog Devices

Comparator

Industrial

No Lead

3

HVSON

Square

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Comparators

18.5 V

0.02 in (0.5 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N3

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

NJM12903R-(TE1)

New Japan Radio

Comparator

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

4 mV

200 nA

Yes

2

BIPOLAR

5 V

Small Outline, Low Profile, Shrink Pitch

Comparators

15 V

0.026 in (0.65 mm)

85 °C (185 °F)

500 ns

Open-Collector

-40 °C (-40 °F)

Tin Bismuth

Dual

R-PDSO-G8

0.055 in (1.4 mm)

0.11 in (2.8 mm)

No

e6

0.114 in (2.9 mm)

LM293ADRE4

Texas Instruments

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADCMP356YKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

4

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

15 μA

Tape And Reel, 7 Inch

3.3 V

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

SOT-343R

Comparators

6 V

125 °C (257 °F)

30 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G4

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LM2901AVQPWRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

4 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

MAX942ESA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

400 nA

Yes

2

BIPOLAR

600 μA

3 V

3/5 V

Small Outline

SOP8,.25

Comparators

6.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

400 nA

80 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX942ESA+T

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

400 nA

Yes

2

BIPOLAR

600 μA

3 V

3/5 V

Small Outline

SOP8,.25

Comparators

6.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

400 nA

80 ns

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD790JRZ-REEL

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

6.5 uA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

5,5/±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 uA

45 ns

Push-Pull

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903BQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

2.5 mV

25 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

0 V

Tape And Reel

5 V

Small Outline

SOP8,.25

Comparators

38 V

0.05 in (1.27 mm)

125 °C (257 °F)

25 nA

300 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.153 in (3.895 mm)

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

LM2903AVQPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LMV331QDBVRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

AEC-Q100

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.065 in (1.65 mm)

No

1.6 MHz

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LT1011AIS8#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1 mV

25 nA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

Small Outline

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

150 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1712IGN#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-6.3 V

6 mV

10 uA

Yes

2

-5 V

Tape And Reel

5 V

Small Outline, Shrink Pitch

Comparators

6.3 V

0.025 in (0.635 mm)

85 °C (185 °F)

5.5 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9116 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TL3016CD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

3 mV

10 uA

Yes

1

BIPOLAR

12.5 mA

-5 V

Tube

5 V

5/±5 V

Small Outline

SOP8,.25

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

10 uA

7.8 µs

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3012AQDCKRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

AEC-Q100

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TSX3702IST

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

6 mV

1.2 nA

Yes

2

CMOS

Tape And Reel

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

2.4 µs

Push-Pull

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

INA300AIDGST

Texas Instruments

Comparator

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

500 uV

10 uA

Yes

1

100 dB

135 μA

Tape And Reel

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

10 nA

36 V

100 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LM2901NSR

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.3

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LM2901NSRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

2 mA

5 V

5 V

Small Outline

SOP14,.3

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LM2903BIDSGR

Texas Instruments

Comparator

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

2.5 mV

25 nA

Yes

2

800 μA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.08,20

Comparators

38 V

0.02 in (0.5 mm)

125 °C (257 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

LMV393MM/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

7 mV

250 nA

Yes

2

BICMOS

100 μA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

450 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LT1714IGN#PBF

Analog Devices

Comparator

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-6.3 V

4 mV

5 uA

Yes

2

-5 V

5 V

Small Outline, Shrink Pitch

Comparators

6.3 V

0.025 in (0.635 mm)

85 °C (185 °F)

8.5 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9116 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT6700HS6-1#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC1540CMS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

16 mV

Yes

1

0 V

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

12 V

0.026 in (0.65 mm)

70 °C (158 °F)

70 µs

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLC3702ID

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

2

CMOS

40 μA

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

30 pA

2.7 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV6700DSER

Texas Instruments

Comparator

Automotive

No Lead

6

VSON

Square

Plastic/Epoxy

2 mV

15 nA

Yes

2

26 μA

5 V

Small Outline, Very Think Profile

Comparators

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

15 nA

29 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-N6

1

0.031 in (0.8 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

TS3021ILT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 mV

300 nA

Yes

1

135 μA

Tape And Reel

2 V

1.8/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

160 nA

42 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM193H

Texas Instruments

Comparator

Military

Wire

8

TO-99

Round

Metal

0 V

9 mV

300 nA

No

2

BIPOLAR

1 mA

0 V

5 V

5 V

Cylindrical

CAN8,.2

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

100 nA

1.3 µs

Open-Collector

-55 °C (-67 °F)

Bottom

O-MBCY-W8

1

0.225 in (5.72 mm)

0.357 in (9.08 mm)

No

0.357 in (9.08 mm)

LM397MFX

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

10 mV

400 nA

Yes

1

2 mA

0 V

5 V

5/30 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

30 V

0.038 in (0.953 mm)

85 °C (185 °F)

250 nA

940 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e0

260 °C (500 °F)

0.114 in (2.9 mm)

MCP6562T-E/MSVAO

Microchip Technology

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

10 mV

5 nA

Yes

2

CMOS

AEC-Q100

260 μA

Tape And Reel

1.8 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

TLC372MDREP

Texas Instruments

Comparator

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

20 nA

Yes

2

CMOS

MIL-STD-883

300 μA

0 V

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

650 ns

Open-Collector, Open-Drain

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.