Comparators

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LM2903DRE4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV1805DBVR

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

4.5 mV

500 pA

Yes

1

12 V

Small Outline, Low Profile, Shrink Pitch

Comparators

42 V

0.037 in (0.95 mm)

125 °C (257 °F)

500 pA

500 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM393APSR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.244 in (6.2 mm)

MCP6541T-E/OT

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

1 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

LM339NE4

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

5 mV

400 nA

No

4

BIPOLAR

2 mA

Tube

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.76 in (19.305 mm)

LM393APWR

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LM2903DGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LM397MFX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

10 mV

400 nA

Yes

1

1 mA

0 V

Tape And Reel

5 V

5/30 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

30 V

0.038 in (0.953 mm)

85 °C (185 °F)

250 nA

940 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.115 in (2.92 mm)

LT1716IS5#TRMPBF

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

-22 V

2.4 mV

1.4 mA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

22 V

0.037 in (0.95 mm)

85 °C (185 °F)

5.5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM293DG

Onsemi

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV761MF/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

1

AEC-Q100

700 μA

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.115 in (2.92 mm)

LM139J/883C

National Semiconductor

Comparator

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

0 V

9 mV

300 nA

No

4

BIPOLAR

MIL-STD-883

2 mA

0 V

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-55 °C (-67 °F)

Tin Lead

Dual

R-GDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.765 in (19.43 mm)

LM339M/NOPB

Texas Instruments

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

4

BIPOLAR

2 mA

0 V

Tube

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LM211D-T

NXP Semiconductors

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

150 nA

Yes

1

BIPOLAR

-15 V

15 V

Small Outline

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

200 ns

Open-Collector

-25 °C (-13 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

LM211DT

STMicroelectronics

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

150 nA

Yes

1

BIPOLAR

-15 V

Tape And Reel, Tube

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

105 °C (221 °F)

100 nA

200 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM339NE3

Texas Instruments

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

5 mV

400 nA

No

4

BIPOLAR

2 mA

Tube

5 V

5 V

In-Line

DIP14,.3

Comparators

36 V

0.1 in (2.54 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e3

0.76 in (19.305 mm)

LT1716HS5#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

-22 V

2.9 mV

30 uA

Yes

1

-15 V

Tape And Reel

15 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

6 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903DG

Onsemi

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

105 °C (221 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM393AD

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tube

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LM339NSRG4

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.3

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LM393M/NOPB

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

2

BIPOLAR

1 mA

0 V

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM293DRG3

Texas Instruments

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

50 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3201AIDBVT

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

6 mV

5 nA

Yes

1

50 μA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

50 pA

47 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM239DT

STMicroelectronics

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

32 V

0.05 in (1.27 mm)

105 °C (221 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LM239D-T

NXP Semiconductors

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

1.3 µs

Open-Collector

-25 °C (-13 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

AD8561ARZ-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel, 7 Inch

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1716IS5#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

-22 V

2.4 mV

1.4 mA

Yes

1

95 μA

-15 V

Tape And Reel

15 V

Small Outline, Very Thin Profile, Shrink Pitch

TSOP5/6,.11,38

Comparators

22 V

0.037 in (0.95 mm)

85 °C (185 °F)

60 nA

5.5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903PWRE4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5/30 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LM339DG

Onsemi

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.341 in (8.65 mm)

LM319MX/NOPB

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

8 mV

1 uA

Yes

2

BIPOLAR

12.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1 uA

80 ns

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.753 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LM319M/NOPB

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

8 mV

1 uA

Yes

2

BIPOLAR

12.5 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1 uA

80 ns

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.753 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LM393AP

Texas Instruments

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

4 mV

-400 nA

No

2

BIPOLAR

1 mA

Tube

5 V

5/30 V

In-Line

DIP8,.3

Comparators

36 V

0.1 in (2.54 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.386 in (9.81 mm)

LM393PSR

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.244 in (6.2 mm)

TLV3201AIDCKR

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

6 mV

5 nA

Yes

1

50 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 pA

47 ns

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LM219D-T

NXP Semiconductors

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

7 mV

1 uA

Yes

2

BIPOLAR

-15 V

15 V

Small Outline

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

80 ns

Open-Collector

-25 °C (-13 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

LM219DT

STMicroelectronics

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-25 V

7 mV

1 nA

Yes

2

BIPOLAR

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

105 °C (221 °F)

500 nA

80 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LM339DR2

Onsemi

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

9 mV

400 nA

Yes

4

BIPOLAR

2 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

1.3 µs

Open-Collector

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.341 in (8.65 mm)

LMV331IDBVR

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM393ADRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LMV7219M7/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

2 uA

Yes

1

BIPOLAR

1.8 mA

0 V

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

950 nA

12 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LM2901DG

Onsemi

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

105 °C (221 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.341 in (8.65 mm)

LMC7211BIM5X/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

18 mV

1 nA

Yes

1

CMOS

12 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

16 V

0.037 in (0.95 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.065 in (1.65 mm)

No

1.6 MHz

e3

260 °C (500 °F)

0.115 in (2.92 mm)

TLV3701QDBVRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

1

CMOS

AEC-Q100

800 nA

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM393DRE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV1702AIDGK

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5.5 mV

20 uA

Yes

2

BIPOLAR

150 μA

Tube

2.2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

40 V

0.026 in (0.65 mm)

125 °C (257 °F)

15 nA

560 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LMV761MFX/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

1

AEC-Q100

700 μA

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 pA

120 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.115 in (2.92 mm)

AD8561ARZ-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV7219M5/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

2 uA

Yes

1

BIPOLAR

1.8 mA

0 V

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

950 nA

12 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.047 in (1.2 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.