Instrumentation Amplifier Instrumentation Amplifiers 1,737

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AD8278BRZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

Yes

1

86 dB

250 μA

-15 V

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.0012 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA101HP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

-20 V

25 µV

30 nA

No

1

106 dB

Bipolar

17 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP14,.3

30 nA

Instrumentation Amplifiers

0.4 V/us

0.002 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

20 nA

1

0 °C (32 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T14

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

300 kHz

e4

0.76 in (19.305 mm)

LMP8602MA/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

60 kHz

2 mV

Yes

1

90 dB

1.5 mA

Tube

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

50

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.91 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD595CD

Analog Devices

Instrumentation Amplifier

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

100 nA

No

1

Bipolar

300 μA

5 V

5 V

In-Line

DIP14,.3

Instrumentation Amplifiers

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

-55 °C (-67 °F)

Tin Lead

Dual

R-CDIP-T14

0.14 in (3.55 mm)

0.3 in (7.62 mm)

No

15 kHz

e0

0.7 in (17.78 mm)

AD8229HDZ

Analog Devices

Instrumentation Amplifier

Automotive

Through-Hole

8

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-17 V

100 µV

70 nA

No

1

86 dB

7 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

35 nA

Instrumentation Amplifiers

22 V/us

17 V

0.1 in (2.54 mm)

210 °C (410 °F)

1

-40 °C (-40 °F)

Gold

10

Dual

R-CDIP-T8

1000

0.161 in (4.09 mm)

0.3 in (7.62 mm)

No

15 MHz

e4

0.52 in (13.208 mm)

INA155UA/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tape And Reel

5 V

3/5 V

Small Outline

SOP8,.25

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

50

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA2126E/2K5

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

2

83 dB

Bipolar

400 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Shrink Pitch

SSOP16,.25

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.025 in (0.635 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold

100

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e4

260 °C (500 °F)

0.193 in (4.9 mm)

ISL28534FVZ-T7A

Renesas Electronics

Instrumentation Amplifier

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

10 µV

1 nA

Yes

2

97 dB

3.5 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

1 nA

Instrumentation Amplifiers

0.8 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC6915IGN#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

Tape And Reel

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

AD620AR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

150 µV

2.5 nA

Yes

1

80 dB

1.6 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

30 s

240 °C (464 °F)

0.193 in (4.9 mm)

INA155UA/2K5G4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

1

78 dB

CMOS

2.8 mA

5 V

3/5 V

Small Outline

SOP8,.25

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

50

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA332AIDGKTG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

10 pA

Yes

1

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1101AIN8#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-22 V

350 µV

10 nA

No

1

96 dB

-15 V

15 V

In-Line

800 pA

Instrumentation Amplifiers

0.1 V/us

0.03 %

22 V

0.1 in (2.54 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T8

100

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

37 kHz

e3

30 s

260 °C (500 °F)

LTC6915HGN#TRPBF

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

Tape And Reel

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

AD626BNZ

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

No

1

55 dB

Bipolar

2 mA

-5 V

5 V

5/±5 V

In-Line

DIP8,.3

Instrumentation Amplifiers

0.22 V/us

0.015 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDIP-T8

100

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

100 kHz

e3

0.389 in (9.88 mm)

AD8222HACPZ-WP

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

HVQCCN

Square

-18 V

150 µV

3 nA

Yes

2

80 dB

1.2 mA

-15 V

15 V

±15 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

1.5 nA

Instrumentation Amplifiers

2.5 V/us

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

100

Quad

S-XQCC-N16

10000

3

0.039 in (1 mm)

0.157 in (4 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD8223ARZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-12.5 V

400 µV

25 nA

Yes

1

74 dB

Bipolar

850 μA

-12 V

12 V

5,±12 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA118PG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

225 µV

10 nA

No

1

73 dB

Bipolar

385 μA

-15 V

15 V

±15 V

In-Line

DIP8,.3

10 pA

Instrumentation Amplifiers

0.9 V/us

0.02 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

800 kHz

e4

0.386 in (9.81 mm)

LTC2053HDD#PBF

Analog Devices

Instrumentation Amplifier

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

90 dB

CMOS

-5 V

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6373HDFM#TRPBF

Analog Devices

Instrumentation Amplifier

No Lead

12

HVSON

Square

Plastic/Epoxy

-20 V

1.19 mV

500 pA

Yes

1

CMOS

5.25 mA

-15 V

Tape And Reel

15 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC12,.15,20

100 pA

12 V/us

0.001 %

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Dual

S-PDSO-N12

0.031 in (0.8 mm)

0.157 in (4 mm)

6.5 MHz

0.157 in (4 mm)

LMP8602QMAX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

AEC-Q100

1.5 mA

Tape And Reel

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

50

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LT1167ACN8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

No

1

88 dB

-15 V

15 V

In-Line

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDIP-T8

10000

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

LT1167ACS8#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

0.193 in (4.9 mm)

MAX4460ESA

Maxim Integrated

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

950 µV

100 pA

Yes

1

80 dB

BICMOS

1.1 mA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.5 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.5 MHz

e0

0.193 in (4.9 mm)

MAX4460ESA+

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

950 µV

100 pA

Yes

1

80 dB

BICMOS

1.1 mA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.5 V/us

0.25 %

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.5 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8278BRZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

Yes

1

86 dB

250 μA

-15 V

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.0012 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA141UG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

10 nA

Yes

1

93 dB

Bipolar

800 μA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

10 nA

Instrumentation Amplifiers

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

100

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1101ISW#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-22 V

950 µV

12 nA

Yes

1

94 dB

-15 V

15 V

Small Outline

1.3 nA

Instrumentation Amplifiers

0.1 V/us

0.05 %

22 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

100

1

0.104 in (2.642 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD8221BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

1 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8278ARZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

Yes

1

80 dB

250 μA

-15 V

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA115AU

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

5 nA

Yes

1

115 dB

3 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

5 nA

Instrumentation Amplifiers

0.6 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD8278ARMZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

500 µV

Yes

1

80 dB

250 μA

-15 V

15 V

±2/±18/2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

1.4 V/us

0.001 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e3

260 °C (500 °F)

0.118 in (3 mm)

AD8278ARZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

Yes

1

80 dB

250 μA

-15 V

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA2141U

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

5 nA

Yes

2

97 dB

Bipolar

1.3 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

5 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 nA

10

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

100

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

INA217AIPG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

750 µV

12 uA

No

1

70 dB

Bipolar

12 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP8,.3

1 uA

Instrumentation Amplifiers

15 V/us

0.0006 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

12 uA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

3.4 MHz

e4

0.386 in (9.81 mm)

AMP04FPZ

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

900 µV

60 nA

No

1

50 dB

-15 V

15 V

In-Line

20 nA

Instrumentation Amplifiers

0.12 V/us

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDIP-T8

1000

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

700 kHz

e3

0.389 in (9.88 mm)

INA125UE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

1

78 dB

525 μA

-15 V

15 V

2.7/36/±1.3/±18 V

Small Outline

SOP16,.25

5 pA

Instrumentation Amplifiers

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

4

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

150 kHz

e4

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

INA166UA

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

12 uA

Yes

1

100 dB

Bipolar

12 mA

-5 V

Tube

5 V

±5 V

Small Outline

SOP14,.25

1 uA

Instrumentation Amplifiers

15 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

12 uA

2000

-40 °C (-40 °F)

Nickel Palladium Gold

2000

Dual

R-PDSO-G14

2000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

450 kHz

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LT1101SW#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-22 V

800 µV

11 nA

Yes

1

112 dB

-15 V

15 V

Small Outline

1.1 nA

Instrumentation Amplifiers

0.01 %

22 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

100

1

0.104 in (2.642 mm)

0.295 in (7.493 mm)

No

e3

30 s

260 °C (500 °F)

0.405 in (10.2995 mm)

AD8224BCPZ-WP

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

HVQCCN

Square

-18 V

175 µV

10 pA

Yes

2

86 dB

750 μA

-15 V

15 V

±15 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

0.6 pA

Instrumentation Amplifiers

0.025 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

1.5 MHz

e3

260 °C (500 °F)

0.157 in (4 mm)

INA126E/250G4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

83 dB

200 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

LMP8602QMMX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

AEC-Q100

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

50

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LT1789IS8-1#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

40 nA

Yes

1

79 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.026 V/us

0.0025 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

60 kHz

e0

0.193 in (4.9025 mm)

ISL28634FVZ-T7A

Renesas Electronics

Instrumentation Amplifier

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

10 µV

1 nA

Yes

1

97 dB

3.6 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

1 nA

Instrumentation Amplifiers

0.8 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD8222BCPZ-WP

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

16

HVQCCN

Square

-18 V

80 µV

1.5 nA

Yes

2

86 dB

1.2 mA

-15 V

15 V

±15 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

600 pA

Instrumentation Amplifiers

2.5 V/us

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

100

Quad

S-XQCC-N16

10000

3

0.039 in (1 mm)

0.157 in (4 mm)

No

1 MHz

e3

260 °C (500 °F)

0.157 in (4 mm)

LT1789IS8-10#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

160 µV

40 nA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.066 V/us

0.0045 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.9025 mm)

AD8227ARZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

27 nA

Yes

1

105 dB

600 μA

-15 V

Tape And Reel

15 V

±1.5/±18/2.2/36 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

0.8 V/us

0.075 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

5

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA321E/2K5G4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2.2 mV

10 pA

Yes

1

77 dB

CMOS

70 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

0.4 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.