Instrumentation Amplifier Instrumentation Amplifiers 1,737

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

INA126U/2K5

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

83 dB

Bipolar

200 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold

100

Dual

R-PDSO-G8

10000

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e4

260 °C (500 °F)

0.193 in (4.9 mm)

INA188ID

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

55 µV

2.5 nA

Yes

1

118 dB

5 V

Small Outline

2.5 nA

Instrumentation Amplifiers

0.9 V/us

0.0008 %

20 V

0.05 in (1.27 mm)

125 °C (257 °F)

2.5 nA

1

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1000

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

600 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6N16-100E/MS

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

17 µV

100 pA

Yes

1

112 dB

CMOS

TS 16949

1.6 mA

Tube

2.9 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.25 %

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

891250

-40 °C (-40 °F)

Matte Tin

7079457

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

XINA819IDGKT

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-20 V

95 µV

2 nA

Yes

1

90 dB

-15 V

15 V

Small Outline, Thin Profile, Shrink Pitch

2 nA

Instrumentation Amplifiers

0.9 V/us

0.0015 %

20 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Dual

S-PDSO-G8

1000

0.043 in (1.1 mm)

0.118 in (3 mm)

2 MHz

0.118 in (3 mm)

LT1167ACS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA819IDGKR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-20 V

95 µV

2 nA

Yes

1

110 dB

-15 V

15 V

Small Outline, Thin Profile, Shrink Pitch

2 nA

Instrumentation Amplifiers

0.9 V/us

0.0015 %

20 V

0.026 in (0.65 mm)

125 °C (257 °F)

500 pA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

2 MHz

e4

260 °C (500 °F)

0.118 in (3 mm)

AD623ARMZ-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-6 V

650 µV

27.5 nA

Yes

1

70 dB

625 μA

-5 V

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

2.5 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

800 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA819IDGKT

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-20 V

95 µV

2 nA

Yes

1

110 dB

-15 V

15 V

Small Outline, Thin Profile, Shrink Pitch

2 nA

Instrumentation Amplifiers

0.9 V/us

0.0015 %

20 V

0.026 in (0.65 mm)

125 °C (257 °F)

500 pA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

2 MHz

e4

260 °C (500 °F)

0.118 in (3 mm)

INA2331AIPWT

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

2

80 dB

CMOS

1.2 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold

25

Dual

R-PDSO-G14

1000

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LT1167ACS8-1#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC2053IMS8#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8421ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

86 µV

8 nA

Yes

1

80 dB

Bipolar

2.6 mA

-15 V

Tape And Reel

15 V

±2.5/±18/5/36 V

Small Outline

SOP8,.25

2.2 nA

Instrumentation Amplifiers

35 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

10 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA114AU/1K

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

5 nA

Yes

1

115 dB

Bipolar

3 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

5 nA

Instrumentation Amplifiers

0.6 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

INA2126UA/2K5

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

2

83 dB

Bipolar

400 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.25

5 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold

100

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e4

260 °C (500 °F)

0.39 in (9.9 mm)

INA819IDRGR

Texas Instruments

Instrumentation Amplifier

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

-20 V

35 µV

500 pA

Yes

1

110 dB

520 μA

-15 V

15 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.11,20

500 pA

Operational Amplifiers

0.9 V/us

0.0015 %

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

500 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-N8

10000

1

0.031 in (0.8 mm)

0.118 in (3 mm)

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8237ARMZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

75 µV

1 nA

Yes

1

104 dB

CMOS

150 μA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

1 nA

Instrumentation Amplifiers

0.15 V/us

0.001 %

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

260 °C (500 °F)

0.118 in (3 mm)

INA2321EA/250

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

2

80 dB

CMOS

140 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

10 pA

Instrumentation Amplifiers

0.4 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold

25

Dual

R-PDSO-G14

1000

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

INA2332AIPWT

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

10 pA

Yes

2

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold

25

Dual

R-PDSO-G14

1000

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LT1167IS8-1#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6N16-001E/MS

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

85 µV

100 pA

Yes

1

89 dB

CMOS

TS 16949

1.6 mA

Tube

2.9 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.25 %

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

56234

-40 °C (-40 °F)

Matte Tin

446683

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

INA331IDGKTG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

600 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA141UAG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

10 nA

Yes

1

93 dB

Bipolar

800 μA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

10 nA

Instrumentation Amplifiers

4 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

100

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA2128U/1K

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

5 nA

Yes

2

80 dB

Bipolar

1.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

5 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 nA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.3 MHz

e4

260 °C (500 °F)

0.406 in (10.3 mm)

INA2332AIPWTG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

8 mV

10 pA

Yes

2

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold

25

Dual

R-PDSO-G14

1000

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD8422BRMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

75 µV

1 nA

Yes

1

86 dB

Bipolar

400 μA

-15 V

Tape And Reel

15 V

±1.8/±18/3.6/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

300 pA

Instrumentation Amplifiers

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

PINA819IDRGR

Texas Instruments

Instrumentation Amplifier

Automotive

No Lead

8

HVSON

Square

Plastic/Epoxy

-20 V

75 µV

500 pA

Yes

1

140 dB

520 μA

-15 V

15 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.11,20

500 pA

Operational Amplifiers

0.9 V/us

0.0015 %

20 V

0.02 in (0.5 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

10

Dual

S-PDSO-N8

10000

0.031 in (0.8 mm)

0.118 in (3 mm)

2 MHz

0.118 in (3 mm)

AD8421BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

45 µV

6 nA

Yes

1

93 dB

Bipolar

2.6 mA

-15 V

Tape And Reel

15 V

±2.5/±18/5/36 V

Small Outline

SOP8,.25

800 pA

Instrumentation Amplifiers

35 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

10 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1167CN8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

No

1

83 dB

-15 V

15 V

In-Line

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDIP-T8

10000

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

INA126PG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

500 µV

50 nA

No

1

74 dB

200 μA

-15 V

15 V

±15 V

In-Line

DIP8,.3

5 nA

Instrumentation Amplifiers

0.012 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Nickel Palladium Gold

100

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

200 kHz

e4

0.386 in (9.81 mm)

INA2128U/1KE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

5 nA

Yes

2

80 dB

Bipolar

1.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

5 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 nA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.3 MHz

e4

260 °C (500 °F)

0.406 in (10.3 mm)

LMP8602MMX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

60 kHz

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.026 in (0.65 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

50

Dual

R-PDSO-G8

1

0.042 in (1.07 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8221ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

80 dB

1 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8426ACPZ-R7

Analog Devices

Instrumentation Amplifier

Automotive

No Lead

16

VQCCN

Square

-18 V

200 µV

27 nA

Yes

1

80 dB

Bipolar

600 μA

-15 V

15 V

±1.35/±18/2.2/36 V

Chip Carrier, Very Thin Profile

LCC16,.16SQ,25

1.5 nA

Instrumentation Amplifiers

0.6 V/us

0.075 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Quad

S-XQCC-N16

1000

3

0.039 in (1 mm)

0.157 in (4 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

INA125UA/2K5E4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

1

78 dB

525 μA

-15 V

15 V

2.7/36/±1.3/±18 V

Small Outline

SOP16,.25

5 pA

Instrumentation Amplifiers

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

4

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

150 kHz

e4

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

INA111BP

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

500 µV

20 pA

No

1

106 dB

4.5 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP8,.3

10 pA

Instrumentation Amplifiers

17 V/us

0.005 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

20 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

2 MHz

e4

0.386 in (9.81 mm)

INA141UAE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

10 nA

Yes

1

117 dB

Bipolar

800 μA

-15 V

Tube

15 V

±15 V

Small Outline

SOP8,.25

10 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 nA

10

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

100

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA116UA

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

5.5 mV

0.1 pA

Yes

1

73 dB

1.4 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

0.1 pA

Instrumentation Amplifiers

0.8 V/us

0.01 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

800 kHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ISL28633FVZ-T7A

Renesas Electronics

Instrumentation Amplifier

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

10 µV

1 nA

Yes

1

97 dB

3.6 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

1 nA

Instrumentation Amplifiers

0.8 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD8422ACPZ-R7

Analog Devices

Instrumentation Amplifier

Instrumentation Amplifiers

3

30 s

260 °C (500 °F)

ADA4254ACPZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

No Lead

28

HVQCCN

Square

-16 V

14 µV

14 nA

Yes

1

112 dB

-12 V

12 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

3.5 nA

Instrumentation Amplifiers

3.1 V/us

0.0015 %

16 V

0.02 in (0.5 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

1

Quad

S-XQCC-N28

128

3

0.031 in (0.8 mm)

0.197 in (5 mm)

1.8 MHz

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2053HMS8#PBF

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

90 dB

CMOS

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8223ARMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-12.5 V

400 µV

25 nA

Yes

1

74 dB

Bipolar

850 μA

-12 V

Tape And Reel, 7 Inch

12 V

5,±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA103KU

Texas Instruments

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-25 V

250 µV

12 uA

Yes

1

100 dB

Bipolar

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

1 uA

Instrumentation Amplifiers

15 V/us

0.004 %

25 V

0.05 in (1.27 mm)

70 °C (158 °F)

12 uA

1

0 °C (32 °F)

Nickel Palladium Gold

100

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

6 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD8221BRZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

1 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6N16-010E/MS

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

22 µV

100 pA

Yes

1

103 dB

CMOS

TS 16949

1.6 mA

Tube

2.9 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.25 %

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

354813

-40 °C (-40 °F)

Matte Tin

2818382

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

INA115BU

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

2 nA

Yes

1

115 dB

3 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

2 nA

Instrumentation Amplifiers

0.6 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

INA128PAG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

1.125 mV

10 nA

No

1

73 dB

Bipolar

750 μA

-15 V

15 V

±15 V

In-Line

DIP8,.3

10 nA

Instrumentation Amplifiers

4 V/us

0.004 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.3 MHz

e4

0.386 in (9.81 mm)

INA114AUE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

5 nA

Yes

1

115 dB

3 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.25

5 nA

Instrumentation Amplifiers

0.6 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.