8 Instrumentation Amplifiers 933

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AD8223ARMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-12.5 V

400 µV

25 nA

Yes

1

74 dB

Bipolar

850 μA

-12 V

Tape And Reel, 7 Inch

12 V

5,±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8221BRZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

1 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP6N16-010E/MS

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

22 µV

100 pA

Yes

1

103 dB

CMOS

TS 16949

1.6 mA

Tube

2.9 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.25 %

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

354813

-40 °C (-40 °F)

Matte Tin

2818382

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

INA128PAG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

1.125 mV

10 nA

No

1

73 dB

Bipolar

750 μA

-15 V

15 V

±15 V

In-Line

DIP8,.3

10 nA

Instrumentation Amplifiers

4 V/us

0.004 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.3 MHz

e4

0.386 in (9.81 mm)

AD8422ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

70 µV

2 nA

Yes

1

83 dB

Bipolar

400 μA

-15 V

Tape And Reel

15 V

±1.8/±18/3.6/36 V

Small Outline

SOP8,.25

800 pA

Instrumentation Amplifiers

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8422ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

110 µV

2 nA

Yes

1

83 dB

Bipolar

400 μA

-15 V

Tape And Reel

15 V

±1.8/±18/3.6/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8602MM/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

60 kHz

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.026 in (0.65 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

50

Dual

R-PDSO-G8

1

0.042 in (1.07 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2053CMS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

105 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8227ARMZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

200 µV

27 nA

Yes

1

105 dB

600 μA

-15 V

15 V

±1.5/±18/2.2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

1.5 nA

Instrumentation Amplifiers

0.8 V/us

0.075 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

5

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

250 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA128PG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

550 µV

5 nA

No

1

80 dB

Bipolar

750 μA

-15 V

Tube

15 V

±15 V

In-Line

DIP8,.3

5 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

5 nA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.3 MHz

e4

0.386 in (9.81 mm)

AD8278BRMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

200 µV

Yes

1

86 dB

250 μA

-15 V

Tape And Reel, 7 Inch

15 V

±2/±18/2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

1.4 V/us

0.0012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA321EA/250

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

70 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

0.4 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA332AIDGKR

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

10 pA

Yes

1

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA111AP

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

500 µV

20 pA

No

1

106 dB

4.5 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP8,.3

10 pA

Instrumentation Amplifiers

17 V/us

0.005 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

20 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

2 MHz

e4

0.386 in (9.81 mm)

INA321EA/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

70 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

0.4 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA126E/250

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

83 dB

200 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

25 nA

5

-55 °C (-67 °F)

Nickel/Palladium/Gold/Silver

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

INA126E-250

Burr-Brown Corporation

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Square

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

83 dB

-15 V

15 V

Small Outline

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

85 °C (185 °F)

5

-40 °C (-40 °F)

Dual

S-PDSO-G8

10000

No

200 kHz

MCP6N16T-010E/MS

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

22 µV

100 pA

Yes

1

103 dB

CMOS

TS 16949

1.6 mA

Tape And Reel

2.9 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.25 %

6.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

354813

-40 °C (-40 °F)

Matte Tin

2818382

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.118 in (3 mm)

AD622ARZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

125 µV

5 nA

Yes

1

66 dB

1.5 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

2.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8227ARZ-R7

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

27 nA

Yes

1

105 dB

600 μA

-15 V

15 V

±1.5/±18/2.2/36 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

0.8 V/us

0.075 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

5

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA122PA

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

250 µV

-50 nA

No

1

83 dB

85 μA

Tube

15 V

2.2/36/±18 V

In-Line

DIP8,.3

5 nA

Instrumentation Amplifiers

0.08 V/us

0.002 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel Palladium Gold

100

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

120 kHz

e4

0.386 in (9.81 mm)

INA126EA/2K5G4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

1

83 dB

200 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

5 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

AD8227BRMZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

100 µV

27 nA

Yes

1

110 dB

600 μA

-15 V

15 V

±1.5/±18/2.2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

1.5 nA

Instrumentation Amplifiers

0.8 V/us

0.015 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

5

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

250 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

AD627ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

Tape And Reel

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8221ARM-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

90 dB

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

825 kHz

e0

240 °C (464 °F)

0.118 in (3 mm)

LMP8602MAX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

60 kHz

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

50

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.91 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1168CS8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

0.48 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1167CS8-1#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

EL8172FSZ-T7A

Renesas Electronics

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

700 µV

4 nA

Yes

1

75 dB

110 μA

Tape And Reel

5 V

Small Outline

SOP8,.25

500 pA

Instrumentation Amplifiers

0.55 V/us

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

3

0.068 in (1.7272 mm)

0.154 in (3.9116 mm)

e3

0.193 in (4.9022 mm)

AD8220BRMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

125 µV

10 pA

Yes

1

80 dB

750 μA

-15 V

Tape And Reel

15 V

±5/±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

2 V/us

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8221AR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

80 dB

1.2 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

SOP8,.25

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

INA331AIDGKRG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

80 dB

CMOS

600 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8221ARZ-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

80 dB

-15 V

Tape And Reel

15 V

Small Outline

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

AD8221BR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

1 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8221BR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

INA332AIDGKRG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

10 pA

Yes

1

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8221BR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

1.2 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

INA321EA/250G4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

70 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

0.4 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1789CS8-10#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

160 µV

40 nA

Yes

1

88 dB

-15 V

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.066 V/us

0.0045 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

100

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

AD8221BRZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

1 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA121PA

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

500 µV

50 pA

No

1

106 dB

530 μA

-15 V

Tube

15 V

±15 V

In-Line

DIP8,.3

0.5 pA

Instrumentation Amplifiers

0.7 V/us

0.005 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

50 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

600 kHz

e4

0.386 in (9.81 mm)

LT1167CS8

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

0.193 in (4.9 mm)

LTC2053IMS8-SYNC#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

CMOS

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8221ARM

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

90 dB

1 mA

-15 V

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

825 kHz

e0

240 °C (464 °F)

0.118 in (3 mm)

AD8227BRZ-R7

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

27 nA

Yes

1

110 dB

600 μA

-15 V

15 V

±1.5/±18/2.2/36 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

0.8 V/us

0.015 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

5

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD622ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

125 µV

5 nA

Yes

1

66 dB

1.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

2.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8221ARMREEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

90 dB

1.2 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

825 kHz

e0

240 °C (464 °F)

0.118 in (3 mm)

AD8227ARZ

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

27 nA

Yes

1

105 dB

600 μA

-15 V

15 V

±1.5/±18/2.2/36 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

0.8 V/us

0.075 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

5

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.