Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Maximum Input Offset Current (IIO) | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Non Linearity | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Maximum Common Mode Voltage | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Nominal Voltage Gain | Terminal Position | Low-Offset | JESD-30 Code | Maximum Voltage Gain | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Nominal Bandwidth (3dB) | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
50 µV |
2 nA |
Yes |
1 |
94 dB |
1.5 mA |
5 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.03 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e3 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
20 µV |
2 nA |
Yes |
1 |
106 dB |
1.5 mA |
2.7 V |
2.7/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.009 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
50 µV |
2 nA |
Yes |
1 |
94 dB |
1.5 mA |
5 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.03 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e3 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.3 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.3 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.3 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
20 µV |
2 nA |
Yes |
1 |
106 dB |
1.5 mA |
2.7 V |
2.7/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.009 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e3 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
50 µV |
2 nA |
Yes |
1 |
94 dB |
1.5 mA |
Tape And Reel |
5 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.03 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
30 µV |
2 nA |
Yes |
1 |
106 dB |
1.5 mA |
2.7 V |
2.7/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.009 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||
|
Microchip Technology |
Instrumentation Amplifier |
Automotive |
Gull Wing |
5 |
LSSOP |
Rectangular |
Plastic/Epoxy |
4.5 mV |
5 nA |
Yes |
1 |
TS 16949 |
170 μA |
Tape And Reel |
Small Outline, Low Profile, Shrink Pitch |
TSOP5/6,.11,37 |
Instrumentation Amplifiers |
4.5 V/us |
0.05 % |
7 V |
0.037 in (0.95 mm) |
125 °C (257 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin |
10 |
Dual |
R-PDSO-G5 |
50 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
900 kHz |
e3 |
260 °C (500 °F) |
0.116 in (2.95 mm) |
|||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
30 µV |
2 nA |
Yes |
1 |
106 dB |
1.5 mA |
2.7 V |
2.7/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.009 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e3 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
20 µV |
2 nA |
Yes |
1 |
106 dB |
1.5 mA |
Tape And Reel |
2.7 V |
2.7/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.009 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
50 µV |
2 nA |
Yes |
1 |
94 dB |
1.5 mA |
5 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.03 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
50 µV |
2 nA |
Yes |
1 |
94 dB |
1.5 mA |
5 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.03 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
30 µV |
2 nA |
Yes |
1 |
106 dB |
1.5 mA |
Tape And Reel |
2.7 V |
2.7/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.009 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
LSSOP |
Rectangular |
Plastic/Epoxy |
50 µV |
2 nA |
Yes |
1 |
94 dB |
1.5 mA |
Tape And Reel |
5 V |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSSOP8,.1 |
4 nA |
Instrumentation Amplifiers |
0.03 % |
6 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G8 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
500 MHz |
e4 |
260 °C (500 °F) |
0.114 in (2.9 mm) |
||||||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin/Lead (Sn85Pb15) |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin/Lead (Sn85Pb15) |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
20 s |
240 °C (464 °F) |
0.114 in (2.9 mm) |
||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
|
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e3 |
245 °C (473 °F) |
0.114 in (2.9 mm) |
||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
Maxim Integrated |
Instrumentation Amplifier |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G6 |
100 |
1 |
0.057 in (1.45 mm) |
0.064 in (1.625 mm) |
No |
2.5 MHz |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||
|
Renesas Electronics |
Instrumentation Amplifier |
Automotive |
Gull Wing |
16 |
LSSOP |
Rectangular |
Plastic/Epoxy |
225 µV |
2.5 nA |
Yes |
2 |
85 dB |
335 μA |
Tape And Reel |
5 V |
Small Outline, Low Profile, Shrink Pitch |
SSOP16,.25 |
1.5 nA |
Instrumentation Amplifiers |
0.5 V/us |
5.5 V |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
0.068 in (1.72 mm) |
0.154 in (3.91 mm) |
240 kHz |
e3 |
0.193 in (4.9 mm) |
||||||||||||||||||||||||
|
Renesas Electronics |
Instrumentation Amplifier |
Automotive |
Gull Wing |
16 |
LSSOP |
Rectangular |
Plastic/Epoxy |
225 µV |
2.5 nA |
Yes |
2 |
85 dB |
335 μA |
Tube |
5 V |
Small Outline, Low Profile, Shrink Pitch |
SSOP16,.25 |
1.5 nA |
Instrumentation Amplifiers |
0.5 V/us |
5.5 V |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
0.068 in (1.72 mm) |
0.154 in (3.91 mm) |
240 kHz |
e3 |
0.193 in (4.9 mm) |
||||||||||||||||||||||||
|
Renesas Electronics |
Instrumentation Amplifier |
Automotive |
Gull Wing |
28 |
LSSOP |
Rectangular |
Plastic/Epoxy |
225 µV |
3 nA |
Yes |
4 |
85 dB |
335 μA |
Tape And Reel |
5 V |
Small Outline, Low Profile, Shrink Pitch |
SSOP28,.25 |
1.5 nA |
Instrumentation Amplifiers |
0.5 V/us |
5.5 V |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G28 |
0.068 in (1.72 mm) |
0.154 in (3.91 mm) |
240 kHz |
e3 |
0.39 in (9.9 mm) |
||||||||||||||||||||||||
|
Renesas Electronics |
Instrumentation Amplifier |
Automotive |
Gull Wing |
28 |
LSSOP |
Rectangular |
Plastic/Epoxy |
225 µV |
3 nA |
Yes |
4 |
85 dB |
335 μA |
5 V |
Small Outline, Low Profile, Shrink Pitch |
SSOP28,.25 |
1.5 nA |
Instrumentation Amplifiers |
0.5 V/us |
5.5 V |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G28 |
0.068 in (1.72 mm) |
0.154 in (3.91 mm) |
240 kHz |
e3 |
0.39 in (9.9 mm) |
|||||||||||||||||||||||||
|
Renesas Electronics |
Instrumentation Amplifier |
Automotive |
Gull Wing |
16 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1 mV |
3 nA |
Yes |
2 |
85 dB |
5 V |
Small Outline, Low Profile, Shrink Pitch |
SSOP16,.25 |
2 nA |
Instrumentation Amplifiers |
0.6 V/us |
5.5 V |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
0.068 in (1.72 mm) |
0.154 in (3.91 mm) |
265 kHz |
e3 |
0.193 in (4.9 mm) |
||||||||||||||||||||||||||
|
Renesas Electronics |
Instrumentation Amplifier |
Automotive |
Gull Wing |
16 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1 mV |
3 nA |
Yes |
2 |
85 dB |
Tape And Reel |
5 V |
Small Outline, Low Profile, Shrink Pitch |
SSOP16,.25 |
2 nA |
Instrumentation Amplifiers |
0.6 V/us |
5.5 V |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDSO-G16 |
0.068 in (1.72 mm) |
0.154 in (3.91 mm) |
265 kHz |
e3 |
0.193 in (4.9 mm) |
An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.
An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.
Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.
One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.