Automotive Instrumentation Amplifiers 307

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MCP6G04-E/SL

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4.5 mV

5 nA

Yes

4

TS 16949

680 μA

Tube

2/5 V

Small Outline

SOP14,.25

Instrumentation Amplifiers

4.5 V/us

0.05 %

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G14

50

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

900 kHz

e3

40 s

260 °C (500 °F)

0.342 in (8.69 mm)

AD8228BRZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

600 pA

Yes

1

100 dB

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

400 pA

Instrumentation Amplifiers

2.5 V/us

0.001 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

0.9999

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G8

1.0001

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

650 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8428ARZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

200 nA

Yes

1

130 dB

Bipolar

8 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

50 nA

Instrumentation Amplifiers

50 V/us

0.0005 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3.5 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMP8603MME/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LTC2053HMS8#TR

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

90 dB

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC6800HMS8#PBF

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

100 µV

10 nA

Yes

1

90 dB

3 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.01 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA337AIDGKR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

100 µV

2 nA

Yes

1

106 dB

CMOS

3.7 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

2 nA

0.1

-40 °C (-40 °F)

Nickel Palladium Gold Silver

100

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

1 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8603MA/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tube

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

MCP6G01T-E/OT

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

4.5 mV

5 nA

Yes

1

TS 16949

170 μA

Tape And Reel

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Instrumentation Amplifiers

4.5 V/us

0.05 %

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G5

50

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

900 kHz

e3

260 °C (500 °F)

0.116 in (2.95 mm)

MCP6N11-010E/SN

Microchip Technology

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

5 nA

Yes

1

62 dB

TS 16949

1.1 mA

Tube

2/5 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

9 V/us

0.05 %

6.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

31622

-40 °C (-40 °F)

Matte Tin

501187

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

35 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA326IDGKR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

CMOS

3.4 mA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.042 in (1.07 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

LMP8602QMAX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

50

Dual

R-PDSO-G8

50.25

0.069 in (1.75 mm)

0.154 in (3.9 mm)

60 kHz

0.193 in (4.9 mm)

LMP8603MM/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LMP8603MAX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

100.5

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

60 kHz

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

LMP8602QMA

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

50

Dual

R-PDSO-G8

50.25

0.069 in (1.75 mm)

0.154 in (3.9 mm)

60 kHz

0.193 in (4.9 mm)

LMP8603QMME/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

AEC-Q100

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

LMP8358MA/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

Yes

1

2.2 mA

Tube

3.3/5 V

Small Outline

SOP14,.25

Instrumentation Amplifiers

11 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

No

e3

30 s

260 °C (500 °F)

LM9040MDC

Texas Instruments

Instrumentation Amplifier

Automotive

No Lead

DIE

Yes

2

CMOS

5 V

Uncased Chip

6 V

125 °C (257 °F)

-40 °C (-40 °F)

Upper

X-XUUC-N

No

INA338AIDGST

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

100 µV

2 nA

Yes

1

106 dB

CMOS

3.7 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

2 nA

0.1

-40 °C (-40 °F)

Nickel Palladium Gold Silver

100

Dual

S-PDSO-G10

1000

2

0.042 in (1.07 mm)

0.118 in (3 mm)

No

1 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8602QMM

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

50

Dual

S-PDSO-G8

50.25

0.043 in (1.09 mm)

0.118 in (3 mm)

60 kHz

0.118 in (3 mm)

INA338AIDGSRG4

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

140 µV

2 nA

Yes

1

100 dB

CMOS

3.7 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.1

-40 °C (-40 °F)

100

Dual

S-PDSO-G10

10000

0.042 in (1.07 mm)

0.118 in (3 mm)

No

1 kHz

0.118 in (3 mm)

INA338AIDGSR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

140 µV

2 nA

Yes

1

100 dB

CMOS

3.7 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.1

-40 °C (-40 °F)

100

Dual

S-PDSO-G10

10000

0.042 in (1.07 mm)

0.118 in (3 mm)

No

1 kHz

0.118 in (3 mm)

INA327IDGSR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

Yes

1

CMOS

3.4 mA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Instrumentation Amplifiers

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Dual

S-PDSO-G10

0.043 in (1.1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

LMP8603MA

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

100.5

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

60 kHz

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

LMP8358MAX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

Yes

1

2.2 mA

Tape And Reel

3.3/5 V

Small Outline

SOP14,.25

Instrumentation Amplifiers

11 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

No

e3

30 s

260 °C (500 °F)

INA326IDGKT

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

CMOS

3.4 mA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.042 in (1.07 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

LMP8603QMA

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

100

Dual

R-PDSO-G8

100.5

0.069 in (1.75 mm)

0.154 in (3.9 mm)

60 kHz

0.193 in (4.9 mm)

LMP8603QMAX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

100

Dual

R-PDSO-G8

100.5

0.069 in (1.75 mm)

0.154 in (3.9 mm)

60 kHz

0.193 in (4.9 mm)

LMP8603QMM

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

100

Dual

S-PDSO-G8

100.5

0.043 in (1.09 mm)

0.118 in (3 mm)

60 kHz

0.118 in (3 mm)

LMP8603QMMX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

AEC-Q100

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

INA338AIDGSTG4

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

140 µV

2 nA

Yes

1

100 dB

CMOS

3.7 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

0.1

-40 °C (-40 °F)

100

Dual

S-PDSO-G10

10000

2

0.042 in (1.07 mm)

0.118 in (3 mm)

No

1 kHz

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8602MAX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

Tin Lead

50

Dual

R-PDSO-G8

50.25

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

60 kHz

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

INA848IDR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

35 µV

50 nA

Yes

1

132 dB

8.8 mA

-15 V

Tape And Reel

15 V

Small Outline

SOP8,.25

10 nA

Instrumentation Amplifiers

45 V/us

0.001 %

20 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

2000

-40 °C (-40 °F)

Nickel Palladium Gold

2000

Dual

R-PDSO-G8

2000

2

0.069 in (1.75 mm)

0.153 in (3.895 mm)

2.8 MHz

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

LMP8602MMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

Tin Lead

50

Dual

S-PDSO-G8

50.25

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

60 kHz

e0

40 s

260 °C (500 °F)

0.118 in (3 mm)

INA327IDGST

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

Yes

1

CMOS

3.4 mA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Instrumentation Amplifiers

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Dual

S-PDSO-G10

0.043 in (1.1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

LMP8603MMX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

INA337AIDGKRG4

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

140 µV

2 nA

Yes

1

100 dB

CMOS

3.7 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

0.1

-40 °C (-40 °F)

Nickel Palladium Gold

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

1 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8358MTX/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

2.2 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Instrumentation Amplifiers

11 V/us

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

4.4 MHz

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LMP8603MM

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

Tin Lead

100

Dual

S-PDSO-G8

100.5

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

60 kHz

e0

40 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8602QMMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

50

Dual

S-PDSO-G8

50.25

0.043 in (1.09 mm)

0.118 in (3 mm)

60 kHz

0.118 in (3 mm)

LMP8603MMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

Tin Lead

100

Dual

S-PDSO-G8

100.5

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

60 kHz

e0

40 s

260 °C (500 °F)

0.118 in (3 mm)

INA848ID

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

35 µV

50 nA

Yes

1

132 dB

8.8 mA

-15 V

15 V

Small Outline

SOP8,.25

10 nA

Instrumentation Amplifiers

45 V/us

0.001 %

20 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

2000

-40 °C (-40 °F)

Nickel Palladium Gold

2000

Dual

R-PDSO-G8

2000

2

0.069 in (1.75 mm)

0.153 in (3.895 mm)

2.8 MHz

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

LMP8602MA

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

Tin Lead

50

Dual

R-PDSO-G8

50.25

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

60 kHz

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

LMP8603QMMX

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

99.5

-40 °C (-40 °F)

100

Dual

S-PDSO-G8

100.5

0.043 in (1.09 mm)

0.118 in (3 mm)

60 kHz

0.118 in (3 mm)

LTC6910-3HTS8#TR

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.8 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LTC6910-3HTS8#TRM

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.8 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

AD8563ARMZ-REEL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

0 V

500 µV

2 nA

Yes

1

95 dB

1.5 mA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.015 %

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

2

Dual

S-PDSO-G10

1000

0.043 in (1.1 mm)

0.118 in (3 mm)

No

1 kHz

e3

0.118 in (3 mm)

LTC6910-2HTS8

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

18 mV

Yes

1

-5 V

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.