Commercial Instrumentation Amplifiers 155

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

RCV420JP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-22 V

1 mV

No

1

70 dB

-15 V

Tube

15 V

In-Line

Instrumentation Amplifiers

1.5 V/us

0.002 %

22 V

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDIP-T16

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

150 kHz

e4

0.76 in (19.305 mm)

RCV420KPG4

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-22 V

1 mV

No

1

70 dB

-15 V

Tube

15 V

In-Line

Instrumentation Amplifiers

1.5 V/us

0.002 %

22 V

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDIP-T16

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.76 in (19.305 mm)

AD625KN

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

50 µV

25 nA

No

1

75 dB

Bipolar

5 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

15 nA

Instrumentation Amplifiers

5 V/us

0.008 %

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDIP-T16

10000

0.17 in (4.32 mm)

0.3 in (7.62 mm)

No

650 kHz

e0

0.75 in (19.055 mm)

LT1167CS8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

RCV420KP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-22 V

1 mV

No

1

70 dB

-15 V

Tube

15 V

In-Line

Instrumentation Amplifiers

1.5 V/us

0.002 %

22 V

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDIP-T16

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.76 in (19.305 mm)

LT1167CS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD625KNZ

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

50 µV

25 nA

No

1

75 dB

Bipolar

5 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

15 nA

Instrumentation Amplifiers

5 V/us

0.008 %

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDIP-T16

10000

0.17 in (4.32 mm)

0.3 in (7.62 mm)

No

650 kHz

e3

0.75 in (19.055 mm)

LT1167ACS8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1167CS8-1#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC2053CMS8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

105 dB

CMOS

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

RCV420JPG4

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-22 V

1 mV

No

1

70 dB

-15 V

Tube

15 V

In-Line

Instrumentation Amplifiers

1.5 V/us

0.002 %

22 V

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDIP-T16

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.76 in (19.305 mm)

LT1789CS8-1#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

40 nA

Yes

1

79 dB

-15 V

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.026 V/us

0.0025 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

60 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1167ACS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1167ACS8-1#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1167CN8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

No

1

83 dB

-15 V

15 V

In-Line

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDIP-T8

10000

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

INA103KU

Texas Instruments

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-25 V

250 µV

12 uA

Yes

1

100 dB

Bipolar

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

1 uA

Instrumentation Amplifiers

15 V/us

0.004 %

25 V

0.05 in (1.27 mm)

70 °C (158 °F)

12 uA

1

0 °C (32 °F)

Nickel Palladium Gold

100

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

6 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC2053CMS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

105 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1168CS8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

0.48 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1167CS8-1#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1789CS8-10#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

160 µV

40 nA

Yes

1

88 dB

-15 V

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.066 V/us

0.0045 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

100

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1167CS8

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

0.193 in (4.9 mm)

INA103KU/1K

Texas Instruments

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-25 V

250 µV

12 uA

Yes

1

100 dB

Bipolar

12.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

1 uA

Instrumentation Amplifiers

15 V/us

0.004 %

25 V

0.05 in (1.27 mm)

70 °C (158 °F)

12 uA

1

0 °C (32 °F)

Nickel Palladium Gold

100

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

6 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

INA103KU/1KE4

Texas Instruments

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-25 V

300 µV

12 uA

Yes

1

72 dB

Bipolar

12.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

1 uA

Instrumentation Amplifiers

15 V/us

0.01 %

25 V

0.05 in (1.27 mm)

70 °C (158 °F)

12 uA

1

0 °C (32 °F)

Nickel/Palladium/Gold

100

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

6 MHz

e4

260 °C (500 °F)

0.406 in (10.3 mm)

LT1789CS8-1#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

40 nA

Yes

1

79 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.026 V/us

0.0025 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

60 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1167CS8#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

1.2 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

0.193 in (4.9 mm)

LT1789CS8-10#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

160 µV

40 nA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.066 V/us

0.0045 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

100

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

INA103KUG4

Texas Instruments

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-25 V

300 µV

12 uA

Yes

1

72 dB

Bipolar

12.5 mA

-15 V

15 V

±15 V

Small Outline

SOP16,.4

1 uA

Instrumentation Amplifiers

15 V/us

0.01 %

25 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Nickel Palladium Gold

100

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

6 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

INA103KP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-25 V

250 µV

12 uA

No

1

100 dB

Bipolar

-15 V

Tube

15 V

±15 V

In-Line

DIP16,.3

1 uA

Instrumentation Amplifiers

15 V/us

0.004 %

25 V

0.1 in (2.54 mm)

70 °C (158 °F)

12 uA

1

0 °C (32 °F)

Nickel Palladium Gold

100

Dual

R-PDIP-T16

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

6 MHz

e4

0.76 in (19.305 mm)

LT1168CS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

0.48 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1102CN8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

1.4 mV

400 pA

No

1

81 dB

-15 V

15 V

In-Line

220 pA

Instrumentation Amplifiers

17 V/us

0.0048 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

Dual

R-PDIP-T8

100

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

3.5 MHz

e3

30 s

260 °C (500 °F)

LT1167ACS8

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin/Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

20 s

235 °C (455 °F)

0.193 in (4.9 mm)

LT1167ACS8-1#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC6915CGN#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

INA101HP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

-20 V

25 µV

30 nA

No

1

106 dB

Bipolar

17 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP14,.3

30 nA

Instrumentation Amplifiers

0.4 V/us

0.002 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

20 nA

1

0 °C (32 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T14

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

300 kHz

e4

0.76 in (19.305 mm)

LT1167ACN8#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

No

1

88 dB

-15 V

15 V

In-Line

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDIP-T8

10000

1

0.155 in (3.937 mm)

0.3 in (7.62 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

LT1167ACS8#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

0.193 in (4.9 mm)

LT1101SW#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-22 V

800 µV

11 nA

Yes

1

112 dB

-15 V

15 V

Small Outline

1.1 nA

Instrumentation Amplifiers

0.01 %

22 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

100

1

0.104 in (2.642 mm)

0.295 in (7.493 mm)

No

e3

30 s

260 °C (500 °F)

0.405 in (10.2995 mm)

PGA102KP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

60 nA

No

1

Bipolar

5.3 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

Instrumentation Amplifiers

9 V/us

0.01 %

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

10

Dual

R-PDIP-T16

100

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.5 MHz

0.76 in (19.305 mm)

INA101KU

Texas Instruments

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-20 V

25 µV

30 nA

Yes

1

106 dB

Bipolar

17 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

30 nA

Instrumentation Amplifiers

0.4 V/us

0.002 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

20 nA

1

0 °C (32 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

300 kHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LM321H

National Semiconductor

Instrumentation Amplifier

Commercial

Wire

8

Round

Metal

-20 V

1.5 mV

180 nA

No

1

126 dB

Bipolar

3.5 mA

Voltage Feedback

Yes

±3/±20 V

Cylindrical

CAN8,.2

40 nA

Instrumentation Amplifiers

20 V

70 °C (158 °F)

180 nA

Yes

12

0 °C (32 °F)

Tin Lead

Bottom

No

O-MBCY-W8

No

e0

LTC2053CDD#PBF

Analog Devices

Instrumentation Amplifier

Commercial

No Lead

8

HVSON

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

105 dB

CMOS

-5 V

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.02 in (0.5 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-N8

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6915CDE#PBF

Analog Devices

Instrumentation Amplifier

Commercial

No Lead

12

HVSON

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.02 in (0.5 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-N12

1

0.033 in (0.85 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

LTC6915CGN#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

Tape And Reel

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

LTC6910-2CTS8#TRMPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

INA103KPG4

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-25 V

250 µV

12 uA

No

1

100 dB

Bipolar

12.5 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP16,.3

1 uA

Instrumentation Amplifiers

15 V/us

0.004 %

25 V

0.1 in (2.54 mm)

70 °C (158 °F)

12 uA

1

0 °C (32 °F)

Nickel Palladium Gold

100

Dual

R-PDIP-T16

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

6 MHz

e4

0.76 in (19.305 mm)

LT1789CS8-10#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

160 µV

40 nA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.066 V/us

0.0045 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Tin Lead

100

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.9025 mm)

LT1789CS8-1#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

40 nA

Yes

1

79 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.026 V/us

0.0025 %

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

60 kHz

e0

0.193 in (4.9025 mm)

LTC2053CMS8-SYNC#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

100 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.