Industrial Instrumentation Amplifiers 900

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LTC2053IMS8#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

CMOS

-5 V

5 V

Small Outline

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1167IS8#PBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

100 µV

800 pA

Yes

1

81 dB

-15 V

15 V

Small Outline

700 pA

Instrumentation Amplifiers

1.2 V/us

0.01 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD620AN

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

150 µV

2.5 nA

No

1

80 dB

1.6 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDIP-T8

10000

0.18 in (4.57 mm)

0.3 in (7.62 mm)

No

1 MHz

e0

0.365 in (9.27 mm)

AD620BRZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

85 µV

1.5 nA

Yes

1

86 dB

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA125UA

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

50 nA

Yes

1

100 dB

CMOS

525 μA

-15 V

Tube

15 V

2.7/36/±1.3/±18 V

Small Outline

SOP16,.25

5 pA

Instrumentation Amplifiers

0.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

25 nA

4

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

150 kHz

e4

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

AD620AR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

150 µV

2.5 nA

Yes

1

80 dB

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD620AR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

150 µV

2.5 nA

Yes

1

80 dB

1.6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

INA118PB

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

100 µV

5 nA

No

1

110 dB

Bipolar

-15 V

Tube

15 V

±15 V

In-Line

DIP8,.3

5 pA

Instrumentation Amplifiers

0.9 V/us

0.01 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

5 nA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

800 kHz

e4

0.386 in (9.81 mm)

PGA204AUG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

175 µV

5 nA

Yes

1

75 dB

Bipolar

7.5 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

2 nA

Instrumentation Amplifiers

0.7 V/us

0.02 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

e4

260 °C (500 °F)

0.406 in (10.3 mm)

AD8221ARMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

90 dB

1 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8422BRMZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

75 µV

1 nA

Yes

1

86 dB

Bipolar

400 μA

-15 V

15 V

±1.8/±18/3.6/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

300 pA

Instrumentation Amplifiers

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA163UAE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

12 uA

Yes

1

100 dB

Bipolar

12 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP14,.25

1 uA

Instrumentation Amplifiers

15 V/us

0.0006 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

12 uA

1

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3.4 kHz

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

INA129U

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

550 µV

5 nA

Yes

1

80 dB

Bipolar

750 μA

-15 V

Tube

15 V

±15 V

Small Outline

SOP8,.25

5 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 nA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDSO-G8

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1.3 MHz

e4

260 °C (500 °F)

0.193 in (4.9 mm)

AD8422ARMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

110 µV

2 nA

Yes

1

83 dB

Bipolar

400 μA

-15 V

Tape And Reel, 7 Inch

15 V

±1.8/±18/3.6/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD620BR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

85 µV

1.5 nA

Yes

1

86 dB

1.6 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD620BR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

85 µV

1.5 nA

Yes

1

86 dB

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

INA2126UA

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

2

83 dB

Bipolar

400 μA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.25

5 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold

100

Dual

R-PDSO-G16

10000

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e4

260 °C (500 °F)

0.39 in (9.9 mm)

INA121UG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

500 µV

50 pA

Yes

1

106 dB

525 μA

-15 V

Tube

15 V

±15 V

Small Outline

SOP8,.25

0.5 pA

Instrumentation Amplifiers

0.7 V/us

0.005 %

0.05 in (1.27 mm)

85 °C (185 °F)

50 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

600 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD620BR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

85 µV

1.5 nA

Yes

1

86 dB

1.6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8220BRMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

125 µV

10 pA

Yes

1

80 dB

750 μA

-15 V

Tape And Reel, 7 Inch

15 V

±5/±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

2 V/us

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

AD623ARMZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-6 V

650 µV

27.5 nA

Yes

1

70 dB

625 μA

-5 V

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

2.5 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

800 kHz

e3

260 °C (500 °F)

0.118 in (3 mm)

INA2128UAG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

225 µV

10 nA

Yes

2

73 dB

Bipolar

1.5 mA

-15 V

15 V

±15 V

Small Outline

SOP16,.4

10 nA

Instrumentation Amplifiers

4 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.3 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD8420ARMZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

27 nA

Yes

1

92 dB

90 μA

-15 V

Tape And Reel, 7 Inch

15 V

±2.7/±18/2.7/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

1 nA

Instrumentation Amplifiers

1 V/us

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA146UAE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

5 mV

50 nA

Yes

1

76 dB

Bipolar

750 μA

-15 V

Tube

15 V

5/±2.25/±18 V

Small Outline

SOP8,.25

5 nA

Instrumentation Amplifiers

0.45 V/us

0.01 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

0.1

-40 °C (-40 °F)

Nickel Palladium Gold

1

Dual

R-PDSO-G8

100

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

50 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD620BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

85 µV

1.5 nA

Yes

1

86 dB

1.6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD623ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

350 µV

27.5 nA

Yes

1

70 dB

625 μA

-5 V

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

2.5 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

PGA103UE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

150 nA

Yes

1

Bipolar

3.5 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

9 V/us

0.01 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDSO-G8

100

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1.5 MHz

e4

260 °C (500 °F)

0.193 in (4.9 mm)

AD8422ARMZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

110 µV

2 nA

Yes

1

83 dB

Bipolar

400 μA

-15 V

15 V

±1.8/±18/3.6/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

0.002 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8421ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

86 µV

8 nA

Yes

1

80 dB

Bipolar

2.6 mA

-15 V

Tape And Reel

15 V

±2.5/±18/5/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

2.2 nA

Instrumentation Amplifiers

35 V/us

0.005 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

10000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

10 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA122U/2K5

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

-25 nA

Yes

1

83 dB

85 μA

Tape And Reel

15 V

2.2/36/±18 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.08 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel Palladium Gold

100

Dual

R-PDSO-G8

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

120 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA126EA/2K5

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

1

83 dB

Bipolar

200 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

5 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

AD8420ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

27 nA

Yes

1

92 dB

90 μA

-15 V

Tape And Reel

15 V

±2.7/±18/2.7/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

1 nA

Instrumentation Amplifiers

1 V/us

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

250 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

XTR105UA/2K5E4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

250 µV

50 nA

Yes

1

86 dB

24 V

Small Outline

10 nA

Instrumentation Amplifiers

0.01 %

40 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

INA2128U

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

5 nA

Yes

2

80 dB

Bipolar

1.3 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.4

5 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 nA

1

-40 °C (-40 °F)

Nickel/Palladium/Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.3 MHz

e4

260 °C (500 °F)

0.406 in (10.3 mm)

INA126EA/250

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

1

83 dB

200 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

5 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

INA126EA-250

Burr-Brown Corporation

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Square

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

1

74 dB

-15 V

15 V

Small Outline

5 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

85 °C (185 °F)

5

-40 °C (-40 °F)

Dual

S-PDSO-G8

10000

No

200 kHz

AD620BRZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

85 µV

1.5 nA

Yes

1

86 dB

-15 V

Tape And Reel, 7 Inch

15 V

Small Outline

750 pA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD627ARZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8221ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

90 dB

1 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8421BRMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

45 µV

6 nA

Yes

1

93 dB

Bipolar

2.6 mA

-15 V

Tape And Reel

15 V

±2.5/±18/5/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

800 pA

Instrumentation Amplifiers

35 V/us

0.005 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

S-PDSO-G8

10000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

10 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA163UA/2K5E4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

12 uA

Yes

1

100 dB

Bipolar

12 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP14,.25

1 uA

Instrumentation Amplifiers

15 V/us

0.0006 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

12 uA

1

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3.4 kHz

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

AD8221ARZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

80 dB

1 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8422BRZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

40 µV

1 nA

Yes

1

89 dB

Bipolar

400 μA

-15 V

15 V

±1.8/±18/3.6/36 V

Small Outline

SOP8,.25

300 pA

Instrumentation Amplifiers

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD620BN

Analog Devices

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

85 µV

1.5 nA

No

1

86 dB

1.6 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

750 pA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDIP-T8

10000

0.18 in (4.57 mm)

0.3 in (7.62 mm)

No

1 MHz

e0

40 s

260 °C (500 °F)

0.365 in (9.27 mm)

INA114BU/1K

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

2 nA

Yes

1

115 dB

Bipolar

3 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

2 nA

Instrumentation Amplifiers

0.6 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD627ARZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA141UA/2K5E4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

50 µV

10 nA

Yes

1

117 dB

Bipolar

800 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

10 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5 nA

10

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

100

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8422BRZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

40 µV

1 nA

Yes

1

89 dB

Bipolar

400 μA

-15 V

15 V

±1.8/±18/3.6/36 V

Small Outline

SOP8,.25

300 pA

Instrumentation Amplifiers

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.