Gull Wing Instrumentation Amplifiers 1,090

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AD8293G80ARJZ-R2

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

50 µV

2 nA

Yes

1

94 dB

1.5 mA

5 V

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

4 nA

Instrumentation Amplifiers

0.03 %

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

500 MHz

e3

260 °C (500 °F)

0.114 in (2.9 mm)

AD621BRZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

215 µV

1.5 nA

Yes

1

120 dB

Bipolar

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

260 °C (500 °F)

0.193 in (4.9 mm)

INA126EA

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

80 dB

200 μA

-15 V

15 V

±15 V

Small Outline, Shrink Pitch

SOP8,.19

2 nA

Instrumentation Amplifiers

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

100

Dual

S-PDSO-G8

10000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

200 kHz

e4

260 °C (500 °F)

0.118 in (3 mm)

INA217AIDWRE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

12 uA

Yes

1

70 dB

Bipolar

12 mA

-15 V

15 V

±15 V

Small Outline

SOP16,.4

Instrumentation Amplifiers

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

3.4 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC2053IMS8#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

ADA4254ARUZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

-16 V

14 µV

14 nA

Yes

1

112 dB

-12 V

12 V

Small Outline, Thin Profile, Shrink Pitch

3.5 nA

Instrumentation Amplifiers

3.1 V/us

0.0015 %

16 V

0.026 in (0.65 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G24

128

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

1.8 MHz

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADA4254ARUZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

-16 V

14 µV

14 nA

Yes

1

112 dB

-12 V

Tape And Reel

12 V

Small Outline, Thin Profile, Shrink Pitch

3.5 nA

Instrumentation Amplifiers

3.1 V/us

0.0015 %

16 V

0.026 in (0.65 mm)

105 °C (221 °F)

0.0625

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G24

128

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

1.8 MHz

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

INA111AU/1KG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

6 mV

20 pA

Yes

1

106 dB

4.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.25

10 pA

Instrumentation Amplifiers

17 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LT1167IS8#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

100 µV

800 pA

Yes

1

81 dB

-15 V

Tape And Reel

15 V

Small Outline

700 pA

Instrumentation Amplifiers

1.2 V/us

0.01 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT1168CS8#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

80 µV

600 pA

Yes

1

83 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

0.48 V/us

0.008 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

AD627BRZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

190 µV

10 nA

Yes

1

83 dB

-5 V

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8278ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

Yes

1

80 dB

250 μA

-15 V

Tape And Reel

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

0.193 in (4.9 mm)

INA2126E/250G4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

2

80 dB

200 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Shrink Pitch

SOP16,.25

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.025 in (0.635 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold

100

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e4

260 °C (500 °F)

0.193 in (4.9 mm)

INA217AIDWR

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

12 uA

Yes

1

70 dB

Bipolar

12 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

1 uA

Instrumentation Amplifiers

15 V/us

0.0006 %

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

12 uA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

3.4 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC2053IMS8-SYNC

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

AD623ARM-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-6 V

650 µV

27.5 nA

Yes

1

70 dB

625 μA

-5 V

Tape And Reel, 7 Inch

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

2.5 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

800 kHz

e0

240 °C (464 °F)

0.118 in (3 mm)

INA2322EA/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

11 mV

10 pA

Yes

2

60 dB

CMOS

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

100 pA

Instrumentation Amplifiers

0.4 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5

-55 °C (-67 °F)

25

Dual

R-PDSO-G14

1000

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

500 kHz

0.197 in (5 mm)

ISL28635FVZ

Renesas Electronics

Instrumentation Amplifier

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

10 µV

1 nA

Yes

1

97 dB

3.6 mA

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

1 nA

Instrumentation Amplifiers

0.8 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

INA332AIDGKT

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

8 mV

10 pA

Yes

1

60 dB

CMOS

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA111BU

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

20 pA

Yes

1

106 dB

4.5 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.25

10 pA

Instrumentation Amplifiers

17 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC2053IMS8

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

95 dB

-5 V

5 V

Small Outline

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

INA155UA

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

50

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA2126EA/2K5G4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-18 V

500 µV

50 nA

Yes

2

74 dB

200 μA

-15 V

15 V

±15 V

Small Outline, Shrink Pitch

TSSOP8,.19

5 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.025 in (0.635 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

100

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA321E/250

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

70 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

0.4 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1789IS8-1#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

100 µV

40 nA

Yes

1

79 dB

-15 V

Tape And Reel

15 V

Small Outline

4 nA

Instrumentation Amplifiers

0.026 V/us

0.0025 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

60 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

INA111AUE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

6 mV

20 pA

Yes

1

106 dB

4.5 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP16,.25

10 pA

Instrumentation Amplifiers

17 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

20 pA

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G16

1000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

SSM2141SZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

75 dB

3.5 mA

-18 V

18 V

±18 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

9.5 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3 MHz

e3

260 °C (500 °F)

0.193 in (4.9 mm)

INA321E/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

70 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

0.4 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

500 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD626AR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

55 dB

Bipolar

2 mA

-5 V

5 V

5/±5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.22 V/us

0.015 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

100 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD626AR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

55 dB

Bipolar

2 mA

-5 V

Tape And Reel, 7 Inch

5 V

5/±5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.22 V/us

0.015 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

100 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

INA2331AIPWTG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

2

80 dB

CMOS

600 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5

-55 °C (-67 °F)

Nickel Palladium Gold

25

Dual

R-PDSO-G14

1000

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ISL28635FVZ-T13

Renesas Electronics

Instrumentation Amplifier

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

10 µV

1 nA

Yes

1

97 dB

3.6 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

1 nA

Instrumentation Amplifiers

0.8 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LT1167ACS8

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin/Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

20 s

235 °C (455 °F)

0.193 in (4.9 mm)

LT1167ACS8-1#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

450 pA

Yes

1

88 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

1.2 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD8271ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

-18 V

1.5 mV

500 nA

Yes

1

70 dB

3.2 mA

-5 V

Tape And Reel

5 V

±5/±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Instrumentation Amplifiers

30 V/us

18 V

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

AD8227ARMZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

200 µV

27 nA

Yes

1

105 dB

600 μA

-15 V

Tape And Reel

15 V

±1.5/±18/2.2/36 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

1.5 nA

Instrumentation Amplifiers

0.8 V/us

0.075 %

18 V

0.026 in (0.65 mm)

125 °C (257 °F)

5

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1000

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

250 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC6915CGN#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

70 °C (158 °F)

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

AD8422BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

40 µV

1 nA

Yes

1

89 dB

Bipolar

400 μA

-15 V

Tape And Reel

15 V

±1.8/±18/3.6/36 V

Small Outline

SOP8,.25

300 pA

Instrumentation Amplifiers

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

2.2 MHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD626AR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

55 dB

Bipolar

2 mA

-5 V

Tape And Reel

5 V

5/±5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.22 V/us

0.015 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

100

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

100 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

INA331AIDGKTG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

500 µV

10 pA

Yes

1

90 dB

CMOS

600 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

5

-55 °C (-67 °F)

Nickel Palladium Gold Silver

25

Dual

S-PDSO-G8

1000

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD8278BRZ-R7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

Yes

1

86 dB

250 μA

-15 V

15 V

±2/±18/2/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

1.4 V/us

0.0012 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMP8602MA/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

60 kHz

2 mV

Yes

1

90 dB

1.5 mA

Tube

3.3/5 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.4 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

50

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.91 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

INA155UA/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tape And Reel

5 V

3/5 V

Small Outline

SOP8,.25

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

50

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LT6370HS8E#PBF

Analog Devices

Operational Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

55 µV

600 pA

Yes

1

88 dB

2.75 mA

-15 V

15 V

Small Outline

SOP8,.25

1 nA

Operational Amplifiers

11 V/us

0.037 %

35 V

0.05 in (1.27 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin Over Nickel

Dual

R-PDSO-G8

1000

0.069 in (1.752 mm)

0.228 in (5.8 mm)

3.1 MHz

e3

0.193 in (4.9 mm)

INA2126E/2K5

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

2

83 dB

Bipolar

400 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline, Shrink Pitch

SSOP16,.25

2 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.025 in (0.635 mm)

85 °C (185 °F)

25 nA

5

-40 °C (-40 °F)

Nickel/Palladium/Gold

100

Dual

R-PDSO-G16

10000

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e4

260 °C (500 °F)

0.193 in (4.9 mm)

ISL28534FVZ-T7A

Renesas Electronics

Instrumentation Amplifier

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

10 µV

1 nA

Yes

2

97 dB

3.5 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

1 nA

Instrumentation Amplifiers

0.8 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC6915IGN#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

0 V

10 µV

10 nA

Yes

1

85 dB

0 V

Tape And Reel

3 V

Small Outline, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.0015 %

11 V

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

200 kHz

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

AD620AR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

150 µV

2.5 nA

Yes

1

80 dB

1.6 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

1 MHz

e0

30 s

240 °C (464 °F)

0.193 in (4.9 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.