Gull Wing Instrumentation Amplifiers 1,090

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AD8293G80BRJZ-R2

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

30 µV

2 nA

Yes

1

106 dB

1.5 mA

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

4 nA

Instrumentation Amplifiers

0.009 %

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

500 MHz

e3

260 °C (500 °F)

0.114 in (2.9 mm)

AD627ARZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

Tape And Reel, 7 Inch

5 V

Small Outline

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

AD627AR-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

Tape And Reel

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8221ARZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

60 µV

1.5 nA

Yes

1

80 dB

-15 V

Tape And Reel, 7 Inch

15 V

Small Outline

600 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

LTC2053CMS8-SYNC#TR

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

100 dB

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC6910-3HTS8#TR

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.8 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

SSM2141S

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

Yes

1

75 dB

-18 V

18 V

Small Outline

Instrumentation Amplifiers

9.5 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3 MHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8228ARMZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

Yes

1

1.2 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

TSSOP8,.19

Instrumentation Amplifiers

0.025 in (0.635 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

AMP02ES

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

30 nA

Yes

1

75 dB

6 mA

-15 V

15 V

Small Outline

15 nA

6 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10000

Dual

R-PDSO-G16

10000

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.2 MHz

e0

0.406 in (10.3 mm)

LTC6910-3HTS8#TRM

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.8 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LTC6910-3ITS8#TRMPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

AD621AR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

185 µV

2.5 nA

Yes

1

110 dB

Bipolar

1.6 mA

-15 V

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD627AR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

200 µV

10 nA

Yes

1

77 dB

-5 V

Tape And Reel, 7 Inch

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AMP02FSZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

350 µV

20 nA

Yes

1

70 dB

-15 V

Tape And Reel

15 V

Small Outline

10 nA

Instrumentation Amplifiers

6 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.2 MHz

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LT1995CMS#PBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

-18 V

6.5 mV

Yes

1

63 dB

-15 V

15 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

900 V/us

18 V

0.02 in (0.5 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Matte Tin

2

Dual

S-PDSO-G10

4

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

32 MHz

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AMP02FS-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

350 µV

20 nA

Yes

1

70 dB

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

10 nA

Instrumentation Amplifiers

6 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.2 MHz

e0

240 °C (464 °F)

0.406 in (10.3 mm)

LTC6910-1ITS8

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

15 mV

Yes

1

-5 V

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

AD621ARZ-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

185 µV

2.5 nA

Yes

1

110 dB

-15 V

Tape And Reel

15 V

Small Outline

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

AD8563ARMZ-REEL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

0 V

500 µV

2 nA

Yes

1

95 dB

1.5 mA

0 V

Tape And Reel

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.015 %

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

2

Dual

S-PDSO-G10

1000

0.043 in (1.1 mm)

0.118 in (3 mm)

No

1 kHz

e3

0.118 in (3 mm)

AMP02FSZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

350 µV

20 nA

Yes

1

70 dB

-15 V

15 V

Small Outline

10 nA

Instrumentation Amplifiers

6 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G16

10000

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.2 MHz

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC6910-2HTS8

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

18 mV

Yes

1

-5 V

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT1101SW#TRPBF

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-22 V

800 µV

11 nA

Yes

1

112 dB

-15 V

Tape And Reel

15 V

Small Outline

1.1 nA

Instrumentation Amplifiers

0.01 %

22 V

0.05 in (1.27 mm)

70 °C (158 °F)

10

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

100

1

0.104 in (2.642 mm)

0.295 in (7.493 mm)

No

e3

30 s

260 °C (500 °F)

0.405 in (10.2995 mm)

AD8250ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

10

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

CMOS

Tape And Reel

±5/±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Instrumentation Amplifiers

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDSO-G10

No

LTC6910-2HTS8#TRM

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.8 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LTC6910-3ITS8

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

AMP02FSZ-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

350 µV

20 nA

Yes

1

70 dB

-15 V

Tape And Reel

15 V

Small Outline

10 nA

Instrumentation Amplifiers

6 V/us

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G16

10000

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.2 MHz

e3

260 °C (500 °F)

0.406 in (10.3 mm)

AD8221BRZ-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

25 µV

400 pA

Yes

1

80 dB

-15 V

Tape And Reel

15 V

Small Outline

400 pA

Instrumentation Amplifiers

2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin - annealed

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

825 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

AD621AR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

185 µV

2.5 nA

Yes

1

110 dB

Bipolar

1.6 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

SOP8,.25

1.5 nA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e0

30 s

240 °C (464 °F)

0.193 in (4.9 mm)

AD8251ARZ

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

10

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

CMOS

±5/±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Instrumentation Amplifiers

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDSO-G10

No

AD8293G160BRJZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

20 µV

2 nA

Yes

1

106 dB

1.5 mA

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

4 nA

Instrumentation Amplifiers

0.009 %

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

500 MHz

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LT1168AIS8#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

75 µV

500 pA

Yes

1

86 dB

-15 V

Tape And Reel

15 V

Small Outline

550 pA

Instrumentation Amplifiers

0.41 V/us

0.007 %

20 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e0

0.193 in (4.9025 mm)

LTC1100CSW#TRPBF

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-9 V

10 µV

135 pA

Yes

1

90 dB

CMOS

-5 V

Tape And Reel

5 V

Small Outline

65 pA

Instrumentation Amplifiers

0.006 %

9 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

100

1

0.104 in (2.642 mm)

0.295 in (7.5 mm)

No

18 kHz

e3

30 s

260 °C (500 °F)

0.405 in (10.2995 mm)

LT1168ACS8

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

60 µV

350 pA

Yes

1

88 dB

-15 V

15 V

Small Outline

400 pA

Instrumentation Amplifiers

0.48 V/us

0.006 %

20 V

0.05 in (1.27 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin Lead

10

Dual

R-PDSO-G8

10000

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

400 kHz

e0

0.193 in (4.9025 mm)

AMP04ES-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

600 µV

50 nA

Yes

1

55 dB

Bipolar

1.1 mA

-15 V

Tape And Reel, 7 Inch

15 V

5/±15 V

Small Outline

SOP8,.25

15 nA

Instrumentation Amplifiers

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

700 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD627BRZ-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

190 µV

10 nA

Yes

1

83 dB

-5 V

Tape And Reel, 7 Inch

5 V

Small Outline

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

LTC6910-2CTS8#TRM

Analog Devices

Instrumentation Amplifier

Commercial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

AD8223BRZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-12.5 V

200 µV

25 nA

Yes

1

86 dB

Bipolar

850 μA

-12 V

Tape And Reel

12 V

5,±12 V

Small Outline

SOP8,.25

2 nA

Instrumentation Amplifiers

0.3 V/us

12.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Matte Tin

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

200 kHz

e3

260 °C (500 °F)

0.193 in (4.9 mm)

AD22057RZ-RL

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

Yes

1

80 dB

500 μA

Tape And Reel

5 V

3/36 V

Small Outline

SOP8,.25

Instrumentation Amplifiers

0.2 V/us

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

19.9

-40 °C (-40 °F)

Matte Tin

20

Dual

R-PDSO-G8

20.1

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

30 kHz

e3

40 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC6910-2ITS8#TR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

-5.5 V

1.5 mV

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Instrumentation Amplifiers

16 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin/Lead

2

Dual

R-PDSO-G8

100

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LTC2053HMS8

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-5.5 V

20 µV

10 nA

Yes

1

90 dB

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

3 nA

Instrumentation Amplifiers

0.2 V/us

0.001 %

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LT1995IMS

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

-18 V

7.5 mV

Yes

1

62 dB

-15 V

15 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

900 V/us

0.001 %

18 V

0.02 in (0.5 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Tin Lead

2

Dual

S-PDSO-G10

4

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

32 MHz

e0

0.118 in (3 mm)

AD627BR

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

190 µV

10 nA

Yes

1

83 dB

-5 V

5 V

3/5/±5/±15 V

Small Outline

SOP8,.25

1 nA

Instrumentation Amplifiers

0.05 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

Tin Lead

10

Dual

R-PDSO-G8

1000

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

80 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8251ARZ-RL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

10

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

CMOS

Tape And Reel

±5/±12 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Instrumentation Amplifiers

0.02 in (0.5 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDSO-G10

No

AD620ARZR7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

150 µV

2.5 nA

Yes

1

80 dB

-15 V

15 V

Small Outline

1.5 nA

Instrumentation Amplifiers

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

10

Dual

R-PDSO-G8

10000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

0.193 in (4.9 mm)

AD623BRZ-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-6 V

160 µV

27.5 nA

Yes

1

77 dB

-5 V

Tape And Reel

5 V

Small Outline

2 nA

Instrumentation Amplifiers

0.3 V/us

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

800 kHz

e3

0.193 in (4.9 mm)

AMP03GSZ-REEL

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

2 mV

Yes

1

75 dB

-15 V

Tape And Reel

15 V

Small Outline

Instrumentation Amplifiers

9.5 V/us

0.02 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

1

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

3 MHz

e3

240 °C (464 °F)

0.193 in (4.9 mm)

AD621BR-REEL7

Analog Devices

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

215 µV

1.5 nA

Yes

1

120 dB

Bipolar

1.6 mA

-15 V

Tape And Reel, 7 Inch

15 V

±15 V

Small Outline

SOP8,.25

750 pA

Instrumentation Amplifiers

1.2 V/us

0.001 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

Tin Lead

100

Dual

R-PDSO-G8

1

0.102 in (2.59 mm)

0.154 in (3.9 mm)

No

200 kHz

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8563ARMZ-R2

Analog Devices

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

0 V

500 µV

2 nA

Yes

1

95 dB

1.5 mA

0 V

2.7 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.015 %

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

1

-40 °C (-40 °F)

Matte Tin

2

Dual

S-PDSO-G10

1000

0.043 in (1.1 mm)

0.118 in (3 mm)

No

1 kHz

e3

0.118 in (3 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.