Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Maximum Input Offset Current (IIO) | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Non Linearity | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Maximum Common Mode Voltage | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Nominal Voltage Gain | Terminal Position | Low-Offset | JESD-30 Code | Maximum Voltage Gain | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Nominal Bandwidth (3dB) | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices |
Instrumentation Amplifier |
Military |
Through-Hole |
14 |
DIP |
Rectangular |
Ceramic, Metal-Sealed Cofired |
-18 V |
1.5 mV |
40 nA |
No |
1 |
74 dB |
MIL-STD-883 Class B |
5 mA |
-15 V |
15 V |
In-Line |
10 nA |
Instrumentation Amplifiers |
10 V/us |
0.2 % |
18 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
1 |
-55 °C (-67 °F) |
Tin Lead |
1000 |
Dual |
R-CDIP-T14 |
1000 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
2 MHz |
e0 |
0.765 in (19.43 mm) |
|||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-18 V |
190 µV |
10 nA |
Yes |
1 |
83 dB |
-5 V |
Tape And Reel |
5 V |
Small Outline |
1 nA |
Instrumentation Amplifiers |
0.05 V/us |
0.001 % |
18 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
5 |
-40 °C (-40 °F) |
Matte Tin - annealed |
10 |
Dual |
R-PDSO-G8 |
1000 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
80 kHz |
e3 |
240 °C (464 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
No Lead |
15 |
DIE |
Rectangular |
-18 V |
25 µV |
15 nA |
Yes |
1 |
80 dB |
Bipolar |
5 mA |
-15 V |
15 V |
±15 V |
Uncased Chip |
Die Or Chip |
5 nA |
Instrumentation Amplifiers |
5 V/us |
0.005 % |
18 V |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Upper |
R-XUUC-N15 |
10000 |
No |
||||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
No Lead |
10 |
HVSON |
Square |
Plastic/Epoxy |
-18 V |
13 mV |
Yes |
1 |
62 dB |
-15 V |
Tape And Reel |
15 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
Instrumentation Amplifiers |
900 V/us |
18 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
2 |
Dual |
S-PDSO-N10 |
4 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
32 MHz |
e0 |
0.118 in (3 mm) |
||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Instrumentation Amplifiers |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
-18 V |
250 µV |
50 nA |
Yes |
1 |
70 dB |
5 mA |
-15 V |
15 V |
±15 V |
Small Outline |
SOP16,.4 |
35 nA |
Instrumentation Amplifiers |
5 V/us |
0.01 % |
18 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin |
10 |
Dual |
R-PDSO-G16 |
1000 |
1 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
1 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.404 in (10.25 mm) |
||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
Through-Hole |
18 |
DIP |
Rectangular |
Ceramic, Glass-Sealed |
-18 V |
10 nA |
No |
1 |
80 dB |
-15 V |
15 V |
In-Line |
3 nA |
Instrumentation Amplifiers |
18 V |
125 °C (257 °F) |
1 |
-55 °C (-67 °F) |
10 |
Dual |
R-GDIP-T18 |
1000 |
Yes |
|||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Automotive |
Gull Wing |
8 |
VSSOP |
Rectangular |
Plastic/Epoxy |
-5.5 V |
1.8 mV |
Yes |
1 |
-5 V |
Tape And Reel |
5 V |
Small Outline, Very Thin Profile, Shrink Pitch |
Instrumentation Amplifiers |
16 V/us |
5.5 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin |
2 |
Dual |
R-PDSO-G8 |
100 |
1 |
0.039 in (1 mm) |
0.064 in (1.625 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
No Lead |
8 |
DIE |
-18 V |
500 µV |
Yes |
1 |
80 dB |
Bipolar |
MIL-STD-883 Class B (Modified) |
3.5 mA |
-15 V |
15 V |
±15 V |
Uncased Chip |
Die Or Chip |
Instrumentation Amplifiers |
9.5 V/us |
18 V |
125 °C (257 °F) |
-55 °C (-67 °F) |
Tin Lead |
1 |
Upper |
X-XUUC-N8 |
No |
e0 |
||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Military |
Through-Hole |
14 |
DIP |
Rectangular |
Ceramic, Metal-Sealed Cofired |
100 nA |
No |
1 |
Bipolar |
300 μA |
5 V |
5 V |
In-Line |
DIP14,.3 |
Instrumentation Amplifiers |
36 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
-55 °C (-67 °F) |
Gold |
Dual |
R-CDIP-T14 |
0.14 in (3.55 mm) |
0.3 in (7.62 mm) |
No |
15 kHz |
e4 |
0.7 in (17.78 mm) |
||||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Automotive |
Gull Wing |
8 |
VSSOP |
Rectangular |
Plastic/Epoxy |
-5.5 V |
18 mV |
Yes |
1 |
-5 V |
5 V |
Small Outline, Very Thin Profile, Shrink Pitch |
Instrumentation Amplifiers |
16 V/us |
5.5 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
1 |
-40 °C (-40 °F) |
Tin/Lead |
2 |
Dual |
R-PDSO-G8 |
100 |
1 |
0.039 in (1 mm) |
0.064 in (1.625 mm) |
No |
e0 |
0.114 in (2.9 mm) |
|||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Commercial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
0 V |
10 µV |
10 nA |
Yes |
1 |
85 dB |
0 V |
Tape And Reel |
3 V |
Small Outline, Shrink Pitch |
3 nA |
Instrumentation Amplifiers |
0.2 V/us |
0.0015 % |
11 V |
0.025 in (0.635 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.068 in (1.727 mm) |
0.154 in (3.899 mm) |
No |
200 kHz |
e0 |
0.193 in (4.8895 mm) |
||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
Through-Hole |
16 |
DIP |
Rectangular |
Ceramic, Glass-Sealed |
-18 V |
500 µV |
150 pA |
No |
1 |
MIL-STD-883 |
-15 V |
15 V |
In-Line |
0.001 % |
18 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
1 |
-55 °C (-67 °F) |
16 |
Dual |
R-GDIP-T16 |
0.14 in (3.553 mm) |
0.3 in (7.62 mm) |
No |
4 MHz |
0.8 in (20.32 mm) |
|||||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-18 V |
190 µV |
10 nA |
Yes |
1 |
83 dB |
-5 V |
Tape And Reel |
5 V |
3/5/±5/±15 V |
Small Outline |
SOP8,.25 |
1 nA |
Instrumentation Amplifiers |
0.05 V/us |
0.001 % |
18 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
5 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G8 |
1000 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
80 kHz |
e0 |
240 °C (464 °F) |
0.193 in (4.9 mm) |
||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
Through-Hole |
16 |
DIP |
Rectangular |
Ceramic, Glass-Sealed |
-16.5 V |
800 µV |
150 pA |
No |
1 |
Bipolar |
14 mA |
-15 V |
15 V |
±15 V |
In-Line |
DIP16,.3 |
Instrumentation Amplifiers |
24 V/us |
0.001 % |
16.5 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
1 |
-55 °C (-67 °F) |
Tin Lead |
16 |
Dual |
R-GDIP-T16 |
16 |
0.14 in (3.553 mm) |
0.3 in (7.62 mm) |
No |
4 MHz |
e0 |
0.8 in (20.32 mm) |
|||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
Through-Hole |
18 |
DIP |
Rectangular |
Ceramic, Glass-Sealed |
-18 V |
80 µV |
10 nA |
No |
1 |
80 dB |
-15 V |
15 V |
In-Line |
1 nA |
Instrumentation Amplifiers |
4.5 V/us |
0.005 % |
18 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
0.1 |
-55 °C (-67 °F) |
1000 |
Dual |
R-GDIP-T18 |
10000 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
570 kHz |
||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Other |
Through-Hole |
14 |
DIP |
Rectangular |
Ceramic |
No |
1 |
Bipolar |
38535Q/M;38534H;883B |
10 mA |
-15 V |
15 V |
±15 V |
In-Line |
DIP14,.3 |
Instrumentation Amplifiers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-25 °C (-13 °F) |
Tin/Lead |
Dual |
R-XDIP-T14 |
No |
e0 |
|||||||||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
No Lead |
28 |
QCCN |
Square |
Ceramic |
Yes |
1 |
Bipolar |
38535Q/M;38534H;883B |
9.6 mA |
-15 V |
15 V |
±15 V |
Chip Carrier |
LCC28,.45SQ |
Instrumentation Amplifiers |
0.05 in (1.27 mm) |
125 °C (257 °F) |
-55 °C (-67 °F) |
Tin/Lead |
Quad |
S-XQCC-N28 |
No |
e0 |
|||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Automotive |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
1 mV |
Yes |
1 |
80 dB |
500 μA |
5 V |
3/36 V |
Small Outline |
SOP8,.25 |
Instrumentation Amplifiers |
0.2 V/us |
36 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
19.9 |
-40 °C (-40 °F) |
Matte Tin |
20 |
Dual |
R-PDSO-G8 |
20.1 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
30 kHz |
e3 |
260 °C (500 °F) |
0.193 in (4.9 mm) |
||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
Through-Hole |
16 |
DIP |
Rectangular |
Ceramic, Glass-Sealed |
-18 V |
500 µV |
150 pA |
No |
1 |
Bipolar |
38535Q/M;38534H;883B |
14 mA |
-15 V |
15 V |
±15 V |
In-Line |
DIP16,.3 |
Instrumentation Amplifiers |
24 V/us |
0.001 % |
18 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
1 |
-55 °C (-67 °F) |
Tin Lead |
16 |
Dual |
R-GDIP-T16 |
16 |
0.14 in (3.553 mm) |
0.3 in (7.62 mm) |
No |
4 MHz |
e0 |
0.8 in (20.32 mm) |
||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-6 V |
160 µV |
27.5 nA |
No |
1 |
77 dB |
625 μA |
-5 V |
5 V |
5 V |
In-Line |
DIP8,.3 |
2 nA |
Instrumentation Amplifiers |
0.3 V/us |
6 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin |
Dual |
R-PDIP-T8 |
1000 |
0.21 in (5.33 mm) |
0.3 in (7.62 mm) |
No |
800 kHz |
e3 |
0.389 in (9.88 mm) |
|||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Commercial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
160 µV |
8 nA |
No |
1 |
95 dB |
CMOS |
5 V |
In-Line |
Instrumentation Amplifiers |
0.06 V/us |
0.0008 % |
0.1 in (2.54 mm) |
70 °C (158 °F) |
10 |
0 °C (32 °F) |
Matte Tin - annealed |
Dual |
R-PDIP-T8 |
100 |
0.155 in (3.937 mm) |
0.3 in (7.62 mm) |
No |
22 kHz |
e3 |
|||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Other |
Through-Hole |
16 |
DIP |
Rectangular |
Ceramic, Metal-Sealed Cofired |
-18 V |
25 µV |
15 nA |
No |
1 |
80 dB |
Bipolar |
5 mA |
-15 V |
15 V |
±15 V |
In-Line |
DIP16,.3 |
10 nA |
Instrumentation Amplifiers |
5 V/us |
0.005 % |
18 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
1 |
-25 °C (-13 °F) |
Tin Lead |
1000 |
Dual |
R-CDIP-T16 |
1000 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
1 MHz |
e0 |
0.75 in (19.05 mm) |
|||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
Through-Hole |
16 |
DIP |
Rectangular |
Ceramic, Metal-Sealed Cofired |
-18 V |
100 µV |
25 nA |
No |
1 |
75 dB |
5 mA |
-15 V |
15 V |
±15 V |
In-Line |
DIP16,.3 |
15 nA |
Instrumentation Amplifiers |
5 V/us |
0.01 % |
18 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-CDIP-T16 |
1000 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
1 MHz |
e0 |
0.75 in (19.05 mm) |
||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
Bipolar |
400 μA |
-15 V |
Tape And Reel |
15 V |
±15 V |
Small Outline |
SOP8,.25 |
Instrumentation Amplifiers |
0.05 in (1.27 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G8 |
No |
||||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
No Lead |
16 |
VQCCN |
Square |
-18 V |
300 µV |
25 pA |
Yes |
2 |
78 dB |
-15 V |
15 V |
Chip Carrier, Very Thin Profile |
2 pA |
Instrumentation Amplifiers |
0.025 % |
18 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
2 |
-40 °C (-40 °F) |
Matte Tin |
10 |
Quad |
S-XQCC-N16 |
1000 |
3 |
0.039 in (1 mm) |
0.157 in (4 mm) |
1.5 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
10 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
±5/±12 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP10,.19,20 |
Instrumentation Amplifiers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Dual |
R-PDSO-G10 |
No |
||||||||||||||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Automotive |
No Lead |
8 |
VSON |
Square |
Plastic/Epoxy |
-5.5 V |
20 µV |
10 nA |
Yes |
1 |
90 dB |
-5 V |
5 V |
Small Outline, Very Thin Profile |
3 nA |
Instrumentation Amplifiers |
0.2 V/us |
0.001 % |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
S-PDSO-N8 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
e0 |
0.118 in (3 mm) |
||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-18 V |
900 µV |
60 nA |
Yes |
1 |
50 dB |
1.1 mA |
-15 V |
Tape And Reel |
15 V |
5/±15 V |
Small Outline |
SOP8,.25 |
20 nA |
Instrumentation Amplifiers |
0.12 V/us |
18 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDSO-G8 |
1000 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
700 kHz |
e0 |
240 °C (464 °F) |
0.193 in (4.9 mm) |
||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
VSSOP |
Rectangular |
Plastic/Epoxy |
-5.5 V |
1.5 mV |
Yes |
1 |
-5 V |
Tape And Reel |
5 V |
Small Outline, Very Thin Profile, Shrink Pitch |
Instrumentation Amplifiers |
16 V/us |
5.5 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin/Lead |
2 |
Dual |
R-PDSO-G8 |
100 |
1 |
0.039 in (1 mm) |
0.064 in (1.625 mm) |
No |
e0 |
0.114 in (2.9 mm) |
||||||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
J Bend |
44 |
QCCJ |
Square |
Ceramic, Metal-Sealed Cofired |
-18 V |
20 mV |
4 pA |
Yes |
1 |
BIMOS |
66 mA |
-12 V |
12 V |
±12 V |
Chip Carrier |
LDCC44,.7SQ |
20 mA |
Instrumentation Amplifiers |
10 V/us |
0.07 % |
18 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
Quad |
S-CQCC-J44 |
128 |
0.135 in (3.42 mm) |
0.65 in (16.51 mm) |
No |
3 MHz |
e0 |
0.65 in (16.51 mm) |
|||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
Through-Hole |
8 |
DIP |
Rectangular |
Plastic/Epoxy |
-20 V |
75 µV |
600 pA |
No |
1 |
86 dB |
-15 V |
15 V |
In-Line |
550 pA |
Instrumentation Amplifiers |
1.2 V/us |
0.007 % |
20 V |
0.1 in (2.54 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Tin Lead |
10 |
Dual |
R-PDIP-T8 |
10000 |
1 |
0.155 in (3.937 mm) |
0.3 in (7.62 mm) |
No |
1 MHz |
e0 |
|||||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
-18 V |
325 µV |
1.2 nA |
Yes |
1 |
83 dB |
1.2 mA |
-5 V |
Tape And Reel |
5 V |
±15 V |
Small Outline |
SOP8,.25 |
500 pA |
Instrumentation Amplifiers |
0.001 % |
18 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
5 |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
900 kHz |
e0 |
240 °C (464 °F) |
0.193 in (4.9 mm) |
||||||||||||||||||
Analog Devices |
Instrumentation Amplifier |
Military |
Flat |
14 |
QFF |
Rectangular |
50k Rad(Si) |
Ceramic, Metal-Sealed Cofired |
-18 V |
100 µV |
175 nA |
Yes |
1 |
86 dB |
MIL-PRF-38535 Class V |
9 mA |
-5 V |
5 V |
Flatpack |
30 nA |
Instrumentation Amplifiers |
0.0002 % |
18 V |
125 °C (257 °F) |
1 |
-55 °C (-67 °F) |
Tin Lead |
10 |
Dual |
R-CDFP-F14 |
1000 |
Yes |
4 MHz |
e0 |
|||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Instrumentation Amplifiers |
Matte Tin - annealed |
1 |
e3 |
30 s |
260 °C (500 °F) |
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
345 µV |
20 nA |
Yes |
1 |
73 dB |
110 μA |
5 V |
±1.35/±3.75/2.7/7.5 V |
Small Outline |
SOP8,.25 |
3 nA |
Instrumentation Amplifiers |
0.06 V/us |
8 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
100 |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
3.1 kHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
No Lead |
10 |
HVSON |
Rectangular |
Plastic/Epoxy |
35 µV |
300 pA |
Yes |
1 |
106 dB |
90 μA |
Tape And Reel |
1.8 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC10,.1,16 |
0.08 V/us |
4 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
10 |
-40 °C (-40 °F) |
Matte Tin - annealed |
20 |
Dual |
R-PDSO-N10 |
250 |
1 |
0.031 in (0.8 mm) |
0.079 in (2 mm) |
28 kHz |
e3 |
30 s |
260 °C (500 °F) |
0.098 in (2.5 mm) |
|||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
No Lead |
6 |
HVSON |
Square |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC6,.12,38 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin - annealed |
10 |
Dual |
S-XDSO-N6 |
100 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
2.5 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
950 µV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline |
SOP8,.25 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin - annealed |
10 |
Dual |
R-PDSO-G8 |
100 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
2.5 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
No Lead |
6 |
HVSON |
Square |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC6,.12,38 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin - annealed |
10 |
Dual |
S-XDSO-N6 |
100 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
2.5 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Instrumentation Amplifiers |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
690 µV |
20 nA |
Yes |
1 |
73 dB |
110 μA |
5 V |
±1.35/±3.75/2.7/7.5 V |
Small Outline |
SOP8,.25 |
3 nA |
Instrumentation Amplifiers |
0.06 V/us |
8 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
1 |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
220 kHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Instrumentation Amplifiers |
Matte Tin - annealed |
1 |
e3 |
30 s |
260 °C (500 °F) |
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Ball |
9 |
VFBGA |
Rectangular |
Plastic/Epoxy |
35 µV |
300 pA |
Yes |
1 |
106 dB |
90 μA |
1.8 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA9,3X3,16 |
0.08 V/us |
4 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
10 |
-40 °C (-40 °F) |
Tin/Silver/Copper/Nickel |
40 |
Bottom |
R-PBGA-B9 |
200 |
1 |
0.02 in (0.5 mm) |
0.048 in (1.228 mm) |
28 kHz |
e2 |
30 s |
260 °C (500 °F) |
0.05 in (1.258 mm) |
||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Instrumentation Amplifiers |
Matte Tin - annealed |
1 |
e3 |
30 s |
260 °C (500 °F) |
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
345 µV |
20 nA |
Yes |
1 |
73 dB |
110 μA |
5 V |
±1.35/±3.75/2.7/7.5 V |
Small Outline |
SOP8,.25 |
3 nA |
Instrumentation Amplifiers |
0.06 V/us |
8 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
10 |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
34 kHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
|||||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
No Lead |
6 |
HVSON |
Square |
1.9 mV |
100 pA |
Yes |
1 |
80 dB |
BICMOS |
1.1 mA |
0 V |
5 V |
3/5 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC6,.12,38 |
Instrumentation Amplifiers |
0.5 V/us |
0.25 % |
6 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
1 |
-40 °C (-40 °F) |
Matte Tin - annealed |
10 |
Dual |
S-XDSO-N6 |
100 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
2.5 MHz |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||||||||
|
Analog Devices |
Instrumentation Amplifier |
Industrial |
Gull Wing |
8 |
SOP |
Rectangular |
Plastic/Epoxy |
345 µV |
20 nA |
Yes |
1 |
73 dB |
110 μA |
5 V |
±1.35/±3.75/2.7/7.5 V |
Small Outline |
SOP8,.25 |
3 nA |
Instrumentation Amplifiers |
0.06 V/us |
8 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
100 |
Dual |
R-PDSO-G8 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
3.1 kHz |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.
An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.
Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.
One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.