Texas Instruments Instrumentation Amplifiers 637

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

INA129PAG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

1.125 mV

10 nA

No

1

73 dB

Bipolar

750 μA

-15 V

15 V

±15 V

In-Line

DIP8,.3

10 nA

Instrumentation Amplifiers

4 V/us

0.004 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T8

10000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.3 MHz

e4

0.386 in (9.81 mm)

INA128UA/1KE4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1.125 mV

10 nA

Yes

1

73 dB

-15 V

15 V

Small Outline

10 nA

Instrumentation Amplifiers

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

10

Dual

R-PDSO-G8

10000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1.3 MHz

0.193 in (4.9 mm)

LMP8100MA

Texas Instruments

Instrumentation Amplifier

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

Yes

1

7.2 mA

3.3/5 V

Small Outline

SOP14,.25

Instrumentation Amplifiers

0.05 in (1.27 mm)

Dual

R-PDSO-G14

No

LMP8358MAX

Texas Instruments

Instrumentation Amplifier

Gull Wing

14

Rectangular

Plastic/Epoxy

Yes

Small Outline

Instrumentation Amplifiers

Dual

R-PDSO-G14

No

PGA203KP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

1 MHz

-18 V

5 mV

50 pA

No

1

80 dB

Bipolar

-15 V

Tube

15 V

±15 V

In-Line

DIP14,.3

25 pA

Instrumentation Amplifiers

15 V/us

0.06 %

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Nickel Palladium Gold

8

Dual

R-PDIP-T14

7.943282347

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1 MHz

e4

0.76 in (19.305 mm)

LMP8602QMA

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline

Instrumentation Amplifiers

0.83 V/us

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

50

Dual

R-PDSO-G8

50.25

0.069 in (1.75 mm)

0.154 in (3.9 mm)

60 kHz

0.193 in (4.9 mm)

INA155EA/2K5G4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

78 dB

CMOS

2.8 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

PGA207PA

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

100 pA

No

1

75 dB

Bipolar

13.5 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

100 pA

Instrumentation Amplifiers

25 V/us

0.005 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

2

Dual

R-PDIP-T16

10

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

5 MHz

0.76 in (19.305 mm)

XTR101AUG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

100 µV

150 nA

Yes

1

90 dB

24 V

Small Outline

30 nA

Instrumentation Amplifiers

0.01 %

40 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LM363D

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

3.5 mV

10 nA

No

1

90 dB

Bipolar

-15 V

15 V

In-Line

DIP16,.3

3 nA

Instrumentation Amplifiers

0.05 %

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin Lead

Dual

R-CDIP-T16

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

INA110KPG4

Texas Instruments

Instrumentation Amplifier

Military

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

100 pA

No

1

70 dB

4.5 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

50 pA

Instrumentation Amplifiers

17 V/us

0.04 %

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T16

800

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

2.5 MHz

e4

0.76 in (19.305 mm)

PGA206P

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

100 pA

No

1

80 dB

Bipolar

13.5 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

100 pA

Instrumentation Amplifiers

25 V/us

0.002 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

2

Dual

R-PDIP-T16

8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

5 MHz

0.76 in (19.305 mm)

PGA205BPG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

60 µV

2 nA

No

1

80 dB

Bipolar

6.5 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

2 pA

Instrumentation Amplifiers

0.7 V/us

0.002 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

R-PDIP-T16

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1 MHz

e4

0.76 in (19.305 mm)

INA102KP

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

600 µV

50 nA

No

1

75 dB

-15 V

15 V

In-Line

15 nA

0.15 V/us

0.045 %

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

Dual

R-PDIP-T16

1000

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

300 kHz

0.76 in (19.305 mm)

INA128U/3K

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

550 µV

5 nA

Yes

1

80 dB

-15 V

15 V

Small Outline

5 nA

Instrumentation Amplifiers

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

10

Dual

R-PDSO-G8

10000

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1.3 MHz

0.193 in (4.9 mm)

LMP8603QMME/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2 mV

Yes

1

90 dB

AEC-Q100

1.5 mA

Tape And Reel

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Instrumentation Amplifiers

0.4 V/us

0.025 in (0.635 mm)

125 °C (257 °F)

60 V

-40 °C (-40 °F)

Matte Tin

100

Dual

R-PDSO-G8

1

No

e3

30 s

260 °C (500 °F)

PGA200AG-BI

Texas Instruments

Instrumentation Amplifier

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

450 µV

30 nA

No

1

80 dB

Bipolar

24 mA

-15 V

15 V

±15 V

In-Line

DIP14,.3

30 nA

Instrumentation Amplifiers

0.4 V/us

0.025 %

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1

-55 °C (-67 °F)

Dual

R-CDIP-T14

1000

0.215 in (5.46 mm)

0.3 in (7.62 mm)

No

50 kHz

0.79 in (20.065 mm)

XTR104BU-TR

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

2.5 mV

250 nA

Yes

1

80 dB

24 V

Small Outline

20 nA

0.01 %

40 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDSO-G16

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.406 in (10.3 mm)

INA110BG-BI

Texas Instruments

Instrumentation Amplifier

Other

Through-Hole

16

DIP

Rectangular

Ceramic

No

1

9 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

Instrumentation Amplifiers

0.1 in (2.54 mm)

85 °C (185 °F)

-25 °C (-13 °F)

Dual

R-XDIP-T16

INA155E/2K5

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

82 dB

CMOS

2.8 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10

-55 °C (-67 °F)

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

30 s

260 °C (500 °F)

0.118 in (3 mm)

LMP8358MA/NOPB

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

Yes

1

2.2 mA

Tube

3.3/5 V

Small Outline

SOP14,.25

Instrumentation Amplifiers

11 V/us

0.05 in (1.27 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

No

e3

30 s

260 °C (500 °F)

PGA100BG

Texas Instruments

Instrumentation Amplifier

Other

Through-Hole

24

DIP

Rectangular

Ceramic

No

1

Hybrid

5,±15 V

In-Line

DIP24,.6

Instrumentation Amplifiers

0.1 in (2.54 mm)

85 °C (185 °F)

-25 °C (-13 °F)

Dual

R-XDIP-T24

No

LM9040MDC

Texas Instruments

Instrumentation Amplifier

Automotive

No Lead

DIE

Yes

2

CMOS

5 V

Uncased Chip

6 V

125 °C (257 °F)

-40 °C (-40 °F)

Upper

X-XUUC-N

No

INA120CG

Texas Instruments

Instrumentation Amplifier

Other

Through-Hole

18

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

625 µV

20 nA

No

1

80 dB

Bipolar

4 mA

-15 V

15 V

±15 V

In-Line

DIP18,.3

10 nA

Instrumentation Amplifiers

0.6 V/us

0.05 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-25 °C (-13 °F)

10

Dual

R-CDIP-T18

1000

No

2 MHz

INA116UA-TR

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

0.1 pA

Yes

1

73 dB

-15 V

15 V

Small Outline

0.1 pA

0.8 V/us

0.01 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Dual

R-PDSO-G16

1000

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

800 kHz

0.406 in (10.3 mm)

PGA200BG-BI

Texas Instruments

Instrumentation Amplifier

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

250 µV

20 nA

No

1

80 dB

Bipolar

24 mA

-15 V

15 V

±15 V

In-Line

DIP14,.3

20 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1

-55 °C (-67 °F)

Dual

R-CDIP-T14

1000

0.215 in (5.46 mm)

0.3 in (7.62 mm)

No

50 kHz

0.79 in (20.065 mm)

LMP8100MAX/NOPB

Texas Instruments

Instrumentation Amplifier

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

Yes

1

7.2 mA

3.3/5 V

Small Outline

SOP14,.25

Instrumentation Amplifiers

0.05 in (1.27 mm)

Dual

R-PDSO-G14

No

LMP8358MT

Texas Instruments

Instrumentation Amplifier

Gull Wing

14

Rectangular

Plastic/Epoxy

Yes

Small Outline

Instrumentation Amplifiers

Dual

R-PDSO-G14

No

PGA207UA-TR

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

100 pA

Yes

1

75 dB

-15 V

15 V

Small Outline

100 pA

25 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

2

Dual

R-PDSO-G16

10

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

5 MHz

0.406 in (10.3 mm)

5962-8778001CA

Texas Instruments

Instrumentation Amplifier

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Glass-Sealed

-20 V

75 µV

30 nA

No

1

106 dB

MIL-STD-883

-15 V

15 V

In-Line

30 nA

Instrumentation Amplifiers

0.1 V/us

0.025 %

20 V

125 °C (257 °F)

1

-55 °C (-67 °F)

10

Dual

R-GDIP-T14

1000

No

INA331AIDGK

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

80 dB

CMOS

600 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

5 V/us

0.01 %

7.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

5

-55 °C (-67 °F)

Nickel Palladium Gold

25

Dual

S-PDSO-G8

1000

0.043 in (1.1 mm)

0.118 in (3 mm)

No

2 MHz

e4

0.118 in (3 mm)

INA338AIDGST

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

100 µV

2 nA

Yes

1

106 dB

CMOS

3.7 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

2 nA

Instrumentation Amplifiers

0.01 %

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

2 nA

0.1

-40 °C (-40 °F)

Nickel Palladium Gold Silver

100

Dual

S-PDSO-G10

1000

2

0.042 in (1.07 mm)

0.118 in (3 mm)

No

1 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

PGA207UA/1K

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

100 pA

Yes

1

75 dB

Bipolar

13.5 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP16,.4

100 pA

Instrumentation Amplifiers

25 V/us

0.005 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

2

Dual

R-PDSO-G16

10

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

5 MHz

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

INA114AU-TR

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

625 µV

5 nA

Yes

1

75 dB

-15 V

15 V

Small Outline

5 nA

0.6 V/us

0.02 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

10

Dual

R-PDSO-G16

10000

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1 MHz

0.406 in (10.3 mm)

INA131APG4

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

125 µV

5 nA

No

1

106 dB

Bipolar

3 mA

-15 V

15 V

±15 V

In-Line

DIP8,.3

5 nA

Instrumentation Amplifiers

0.7 V/us

0.004 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

100

Dual

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

70 kHz

e4

0.386 in (9.81 mm)

INA2128UA-TR

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

1.125 mV

10 nA

Yes

2

73 dB

-15 V

15 V

Small Outline

10 nA

Instrumentation Amplifiers

4 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

100

Dual

R-PDSO-G16

10000

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

1.3 MHz

0.406 in (10.3 mm)

INA155UG4

Texas Instruments

Instrumentation Amplifier

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

10

-55 °C (-67 °F)

Nickel Palladium Gold

10

Dual

R-PDSO-G8

50

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

XTR101AU/1K

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

30 µV

150 nA

Yes

1

90 dB

Tape And Reel

24 V

Small Outline

30 nA

Instrumentation Amplifiers

0.01 %

40 V

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

INA141UA/1K

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

250 µV

10 nA

Yes

1

93 dB

-15 V

15 V

Small Outline

10 nA

Instrumentation Amplifiers

0.004 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

10

-40 °C (-40 °F)

10

Dual

R-PDSO-G8

100

0.069 in (1.75 mm)

0.154 in (3.9 mm)

1 MHz

0.193 in (4.9 mm)

INA110AG

Texas Instruments

Instrumentation Amplifier

Military

Through-Hole

16

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

1 mV

100 pA

No

1

70 dB

4.5 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

50 pA

Instrumentation Amplifiers

17 V/us

0.04 %

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1

-55 °C (-67 °F)

10

Dual

R-CDIP-T16

800

0.175 in (4.45 mm)

0.3 in (7.62 mm)

No

2.5 MHz

0.8 in (20.32 mm)

PGA206U

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

100 pA

Yes

1

80 dB

-15 V

15 V

Small Outline

100 pA

25 V/us

0.002 %

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

2

Dual

R-PDSO-G16

8

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

5 MHz

0.406 in (10.3 mm)

PGA206PA

Texas Instruments

Instrumentation Amplifier

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

2.5 mV

100 pA

No

1

75 dB

Bipolar

13.5 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP16,.3

100 pA

Instrumentation Amplifiers

25 V/us

0.005 %

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

1

-40 °C (-40 °F)

Nickel Palladium Gold

2

Dual

R-PDIP-T16

8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

5 MHz

e4

0.76 in (19.305 mm)

LMP8602QMM

Texas Instruments

Instrumentation Amplifier

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

20 nA

Yes

1

90 dB

3.3 V

Small Outline, Thin Profile, Shrink Pitch

Instrumentation Amplifiers

0.83 V/us

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

49.75

-40 °C (-40 °F)

50

Dual

S-PDSO-G8

50.25

0.043 in (1.09 mm)

0.118 in (3 mm)

60 kHz

0.118 in (3 mm)

PGA201BG-BI

Texas Instruments

Instrumentation Amplifier

Military

Through-Hole

14

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-18 V

250 µV

20 nA

No

1

80 dB

Bipolar

24 mA

-15 V

15 V

±15 V

In-Line

DIP14,.3

20 nA

Instrumentation Amplifiers

0.4 V/us

0.012 %

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

1

-55 °C (-67 °F)

Dual

R-CDIP-T14

512

0.215 in (5.46 mm)

0.3 in (7.62 mm)

No

50 kHz

0.79 in (20.065 mm)

INA155E/250

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1 mV

10 pA

Yes

1

92 dB

CMOS

2.8 mA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

10 pA

Instrumentation Amplifiers

6.5 V/us

0.015 %

7.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

10 pA

10

-40 °C (-40 °F)

Nickel Palladium Gold

10

Dual

S-PDSO-G8

50

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

550 kHz

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

INA101AG

Texas Instruments

Instrumentation Amplifier

Other

Through-Hole

14

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

-20 V

25 µV

30 nA

No

1

106 dB

Bipolar

17 mA

-15 V

Tube

15 V

±15 V

In-Line

DIP14,.3

30 nA

Instrumentation Amplifiers

0.4 V/us

0.002 %

20 V

0.1 in (2.54 mm)

85 °C (185 °F)

20 nA

1

-25 °C (-13 °F)

Gold

10

Dual

R-CDIP-T14

1000

0.175 in (4.45 mm)

0.3 in (7.62 mm)

No

300 kHz

e4

0.73 in (18.545 mm)

INA126E/2KG4

Texas Instruments

Instrumentation Amplifier

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-18 V

250 µV

25 nA

Yes

1

80 dB

-15 V

15 V

Small Outline, Thin Profile, Shrink Pitch

2 nA

Instrumentation Amplifiers

0.012 %

18 V

0.026 in (0.65 mm)

85 °C (185 °F)

5

-40 °C (-40 °F)

100

Dual

S-PDSO-G8

10000

0.043 in (1.1 mm)

0.118 in (3 mm)

200 kHz

0.118 in (3 mm)

PGA102KP-BI

Texas Instruments

Instrumentation Amplifier

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

60 nA

No

1

Bipolar

10.6 mA

-15 V

15 V

±15 V

In-Line

DIP16,.3

Instrumentation Amplifiers

9 V/us

0.01 %

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

1

0 °C (32 °F)

10

Dual

R-PDIP-T16

100

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.5 MHz

0.822 in (20.89 mm)

Instrumentation Amplifiers

An instrumentation amplifier is an electronic circuit that amplifies small differential voltages to produce a larger output voltage signal. The main purpose of an instrumentation amplifier is to provide a high-precision and stable amplification of small signals while rejecting any common-mode noise or interference.

An instrumentation amplifier consists of three operational amplifiers (op-amps) and precision resistors. The first two op-amps are used as buffer amplifiers, and the third op-amp is used as a differential amplifier. The input signals are applied to the buffer amplifiers, which provide high input impedance and low output impedance to minimize loading effects. The differential amplifier then amplifies the difference between the two input signals, and the resulting output signal is proportional to the difference in voltage between the two input signals.

Instrumentation amplifiers are used in applications where small voltage signals need to be accurately measured or amplified. They are commonly used in industrial control systems, biomedical instrumentation, data acquisition systems, and audio equipment.

One advantage of an instrumentation amplifier is that it can be used to measure small differential voltages even in the presence of significant common-mode noise, which can be difficult to achieve with other types of amplifiers. Additionally, many instrumentation amplifiers offer a high level of accuracy, stability, and linearity, which makes them a popular choice for precision measurement applications.