Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Maximum Input Offset Current (IIO) | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Non Linearity | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Maximum Common Mode Voltage | Nominal Response Time | Output Type | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Nominal Voltage Gain | Terminal Position | Low-Offset | JESD-30 Code | Maximum Voltage Gain | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Texas Instruments |
Operational Amplifier |
Industrial |
Gull Wing |
38 |
TSSOP |
Rectangular |
Plastic/Epoxy |
145 MHz |
0 V |
No |
2000 uV |
950 nA |
Yes |
4 |
80 dB |
BIPOLAR |
102 dB |
5 mA |
0 V |
Voltage Feedback |
No |
Tape And Reel |
3.3 V |
3.3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP38,.25,20 |
180 nA |
Operational Amplifiers |
490 V/us |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
900 nA |
Yes |
100000 |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
No |
R-PDSO-G38 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
9.3 MHz |
No |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
Yes |
No |
|||||||||||
|
Texas Instruments |
Operational Amplifier |
Industrial |
Gull Wing |
38 |
TSSOP |
Rectangular |
Plastic/Epoxy |
145 MHz |
0 V |
No |
2000 uV |
950 nA |
Yes |
4 |
80 dB |
BIPOLAR |
102 dB |
5 mA |
0 V |
Voltage Feedback |
No |
Tube |
3.3 V |
3.3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP38,.25,20 |
180 nA |
Operational Amplifiers |
490 V/us |
5.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
900 nA |
Yes |
100000 |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
No |
R-PDSO-G38 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
9.3 MHz |
No |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
Yes |
No |
|||||||||||
|
Texas Instruments |
Operational Amplifier |
Military |
Gull Wing |
38 |
TSSOP |
Rectangular |
Plastic/Epoxy |
145 MHz |
No |
8000 uV |
3.8 uA |
Yes |
4 |
80 dB |
102 dB |
5.6 mA |
Voltage Feedback |
No |
Tape And Reel |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
2 uA |
Operational Amplifiers |
490 V/us |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
900 nA |
Yes |
14125 |
-55 °C (-67 °F) |
Nickel Palladium Gold |
Dual |
No |
R-PDSO-G38 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
9.3 MHz |
No |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
Yes |
||||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Military |
Gull Wing |
38 |
TSSOP |
Rectangular |
Plastic/Epoxy |
93 MHz |
No |
7000 uV |
3.8 uA |
Yes |
4 |
80 dB |
100 dB |
1.4 mA |
Voltage Feedback |
No |
3.3 V |
3.3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP38,.25,20 |
2 uA |
Operational Amplifiers |
55 V/us |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
3.8 uA |
Yes |
14125 |
-55 °C (-67 °F) |
Nickel Palladium Gold |
Dual |
No |
R-PDSO-G38 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
9.3 MHz |
No |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
Yes |
||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Military |
Gull Wing |
38 |
TSSOP |
Rectangular |
Plastic/Epoxy |
93 MHz |
7000 uV |
3.8 uA |
Yes |
4 |
100 dB |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
Operational Amplifiers |
55 V/us |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-55 °C (-67 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G38 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
||||||||||||||||||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Military |
Gull Wing |
38 |
TSSOP |
Rectangular |
Plastic/Epoxy |
145 MHz |
No |
8000 uV |
3.8 uA |
Yes |
4 |
80 dB |
102 dB |
5.6 mA |
Voltage Feedback |
No |
Tape And Reel |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
2 uA |
Operational Amplifiers |
490 V/us |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
900 nA |
Yes |
14125 |
-55 °C (-67 °F) |
Nickel Palladium Gold |
Dual |
No |
R-PDSO-G38 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
9.3 MHz |
No |
e4 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
Yes |
||||||||||||||||||
Texas Instruments |
Operational Amplifier |
Military |
Gull Wing |
38 |
TSSOP |
Rectangular |
Plastic/Epoxy |
93 MHz |
No |
7000 uV |
3.8 uA |
Yes |
4 |
80 dB |
100 dB |
1.4 mA |
Voltage Feedback |
No |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
2 uA |
Operational Amplifiers |
55 V/us |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
3.8 uA |
Yes |
14125 |
-55 °C (-67 °F) |
Dual |
No |
R-PDSO-G38 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
9.3 MHz |
No |
0.382 in (9.7 mm) |
Yes |
|||||||||||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Industrial |
No Lead |
38 |
HTFLGA |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
BICMOS |
Voltage Feedback |
No |
5 V |
Grid Array, Heat Sink/Slug, Thin Profile, Fine Pitch |
LGA38,8X15,28 |
5.5 V |
0.028 in (0.7 mm) |
105 °C (221 °F) |
Yes |
-40 °C (-40 °F) |
Bottom |
R-PBGA-B38 |
0.043 in (1.08 mm) |
0.217 in (5.5 mm) |
No |
0.413 in (10.5 mm) |
No |
||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Industrial |
No Lead |
38 |
HTFLGA |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
BICMOS |
Voltage Feedback |
No |
5 V |
Grid Array, Heat Sink/Slug, Thin Profile, Fine Pitch |
LGA38,8X15,28 |
5.5 V |
0.028 in (0.7 mm) |
105 °C (221 °F) |
Yes |
-40 °C (-40 °F) |
Bottom |
R-PBGA-B38 |
0.043 in (1.08 mm) |
0.217 in (5.5 mm) |
No |
0.413 in (10.5 mm) |
No |
||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Industrial |
No Lead |
38 |
HLGA |
Rectangular |
Yes |
1 |
5 V |
Grid Array, Heat Sink/Slug |
Operational Amplifiers |
5.5 V |
0.028 in (0.7 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Bottom |
R-XBGA-N38 |
3 |
0.043 in (1.08 mm) |
0.217 in (5.5 mm) |
30 s |
260 °C (500 °F) |
0.413 in (10.5 mm) |
||||||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Industrial |
No Lead |
38 |
HLGA |
Rectangular |
Yes |
1 |
BICMOS |
5 V |
Grid Array, Heat Sink/Slug |
Operational Amplifiers |
5.5 V |
0.028 in (0.7 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Bottom |
R-XBGA-N38 |
3 |
0.043 in (1.08 mm) |
0.217 in (5.5 mm) |
30 s |
260 °C (500 °F) |
0.413 in (10.5 mm) |
Operational amplifiers, or op-amps for short, are electronic circuits that provide a high gain amplification of an input voltage signal. They are widely used in electronic circuits for various signal processing tasks due to their versatile nature and high gain characteristics.
An op-amp typically has two input terminals (inverting and non-inverting), an output terminal, and a power supply. The output voltage of the op-amp is proportional to the difference between the voltages at the two input terminals, with the exact gain being determined by the circuit design.
Op-amps can be used in a variety of electronic circuits such as filters, amplifiers, oscillators, and voltage regulators. They can also be used as comparators, with the output switching to one of two voltage levels depending on the relationship between the two input voltages.
One of the main advantages of op-amps is that they can provide a very high gain, making them useful in amplifying small signals or reducing noise. They also have a wide range of input and output impedance, making them compatible with a wide range of electronic circuits. Additionally, op-amps can be designed to have very high input impedance, which means they can detect and amplify signals with minimal loading effects on the circuit they are connected to.