Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Maximum Input Offset Current (IIO) | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Non Linearity | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Maximum Common Mode Voltage | Nominal Response Time | Output Type | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Nominal Voltage Gain | Terminal Position | Low-Offset | JESD-30 Code | Maximum Voltage Gain | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
15 MHz |
100 uV |
2 nA |
Yes |
1 |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
8 V/us |
6 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
S-PBGA-B4 |
1 |
0.022 in (0.55 mm) |
0.033 in (0.835 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.033 in (0.835 mm) |
|||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
200 kHz |
50 uV |
Yes |
1 |
CMOS |
120 dB |
-3.6 V |
3.6 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
0.08 V/us |
6 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
S-PBGA-B4 |
1 |
0.015 in (0.37 mm) |
0.03 in (0.764 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.03 in (0.764 mm) |
|||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
600 uV |
Yes |
1 |
BICMOS |
130 dB |
2.5 μA |
3.6 V |
3.6 V |
Grid Array |
BGA4,2X2,20 |
Operational Amplifiers |
30 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Bottom |
S-PBGA-B4 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
No |
0.039 in (1 mm) |
||||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
15 MHz |
Yes |
100 uV |
2 nA |
Yes |
1 |
BIPOLAR |
1.2 mA |
Voltage Feedback |
No |
Tape And Reel |
3.3 V |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA4,2X2,16 |
Operational Amplifiers |
8 V/us |
6 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
10 pA |
Yes |
2 |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
Yes |
S-PBGA-B4 |
1 |
0.022 in (0.55 mm) |
0.033 in (0.835 mm) |
No |
No |
e2 |
30 s |
260 °C (500 °F) |
0.033 in (0.835 mm) |
No |
No |
|||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
600 uV |
Yes |
1 |
BICMOS |
130 dB |
2.5 μA |
3.6 V |
3.6 V |
Grid Array |
BGA4,2X2,20 |
Operational Amplifiers |
30 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Bottom |
S-PBGA-B4 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
No |
0.039 in (1 mm) |
||||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
600 uV |
Yes |
1 |
BICMOS |
130 dB |
2.5 μA |
3.6 V |
3.6 V |
Grid Array |
BGA4,2X2,20 |
Operational Amplifiers |
30 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
S-PBGA-B4 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
No |
e2 |
30 s |
260 °C (500 °F) |
0.039 in (1 mm) |
Operational amplifiers, or op-amps for short, are electronic circuits that provide a high gain amplification of an input voltage signal. They are widely used in electronic circuits for various signal processing tasks due to their versatile nature and high gain characteristics.
An op-amp typically has two input terminals (inverting and non-inverting), an output terminal, and a power supply. The output voltage of the op-amp is proportional to the difference between the voltages at the two input terminals, with the exact gain being determined by the circuit design.
Op-amps can be used in a variety of electronic circuits such as filters, amplifiers, oscillators, and voltage regulators. They can also be used as comparators, with the output switching to one of two voltage levels depending on the relationship between the two input voltages.
One of the main advantages of op-amps is that they can provide a very high gain, making them useful in amplifying small signals or reducing noise. They also have a wide range of input and output impedance, making them compatible with a wide range of electronic circuits. Additionally, op-amps can be designed to have very high input impedance, which means they can detect and amplify signals with minimal loading effects on the circuit they are connected to.