Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Maximum Input Offset Current (IIO) | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Non Linearity | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Maximum Common Mode Voltage | Nominal Response Time | Output Type | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Nominal Voltage Gain | Terminal Position | Low-Offset | JESD-30 Code | Maximum Voltage Gain | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Texas Instruments |
Operational Amplifier |
Industrial |
Through-Hole |
5 |
TO-220 |
Rectangular |
Plastic/Epoxy |
1.4 MHz |
-35 V |
Yes |
5000 uV |
100 pA |
No |
1 |
90 dB |
106 dB |
15 mA |
-35 V |
Voltage Feedback |
No |
Tube |
35 V |
±35 V |
Flange Mount |
SIP5,.1,67TB |
100 pA |
5 V/us |
Operational Amplifiers |
8 V/us |
35 V |
0.067 in (1.7 mm) |
85 °C (185 °F) |
100 pA |
Yes |
31600 |
-40 °C (-40 °F) |
Matte Tin |
Single |
No |
R-PSFM-T5 |
0.185 in (4.7 mm) |
0.335 in (8.51 mm) |
No |
No |
e3 |
0.4 in (10.16 mm) |
No |
Yes |
|||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Industrial |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
1 MHz |
-30 V |
No |
10000 uV |
-500 nA |
No |
1 |
80 dB |
95 dB |
20 mA |
-30 V |
Voltage Feedback |
Yes |
Tube |
30 V |
±4/±30/8/60 V |
Flange Mount |
ZIP7,.15,.2TB |
Operational Amplifiers |
10 V/us |
30 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
500 nA |
Yes |
31620 |
-40 °C (-40 °F) |
Matte Tin |
Zig-Zag |
No |
R-PZFM-T7 |
0.185 in (4.7 mm) |
0.328 in (8.34 mm) |
No |
No |
e3 |
0.4 in (10.16 mm) |
No |
Yes |
|||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Industrial |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
1 MHz |
-30 V |
No |
10000 uV |
-500 nA |
No |
1 |
80 dB |
95 dB |
20 mA |
-30 V |
Voltage Feedback |
Yes |
Tube |
30 V |
±4/±30/8/60 V |
Flange Mount |
ZIP7,.15,.2TB |
Operational Amplifiers |
10 V/us |
30 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
500 nA |
Yes |
31620 |
-40 °C (-40 °F) |
Matte Tin |
Single |
No |
R-PSFM-T7 |
0.185 in (4.7 mm) |
0.33 in (8.38 mm) |
No |
No |
e3 |
0.4 in (10.17 mm) |
No |
Yes |
|||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Industrial |
Through-Hole |
5 |
TO-220 |
Rectangular |
Plastic/Epoxy |
1.4 MHz |
-35 V |
Yes |
5000 uV |
100 pA |
No |
1 |
90 dB |
106 dB |
15 mA |
-35 V |
Voltage Feedback |
No |
Tube |
35 V |
±35 V |
Flange Mount |
SIP5,.1,67TB |
100 pA |
5 V/us |
Operational Amplifiers |
8 V/us |
35 V |
0.067 in (1.7 mm) |
85 °C (185 °F) |
100 pA |
Yes |
31600 |
-40 °C (-40 °F) |
Matte Tin |
Single |
No |
R-PSFM-T5 |
0.185 in (4.7 mm) |
0.335 in (8.51 mm) |
No |
No |
e3 |
0.4 in (10.16 mm) |
No |
Yes |
|||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Industrial |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
1 MHz |
-30 V |
No |
5000 uV |
-500 nA |
No |
1 |
80 dB |
95 dB |
15 mA |
-30 V |
Voltage Feedback |
Yes |
Tube |
30 V |
±4/±30/8/60 V |
Flange Mount |
ZIP7,.15,.2TB |
50 nA |
Operational Amplifiers |
6 V/us |
30 V |
0.05 in (1.27 mm) |
85 °C (185 °F) |
500 nA |
Yes |
100000 |
-40 °C (-40 °F) |
Matte Tin |
Zig-Zag |
No |
R-PZFM-T7 |
0.185 in (4.7 mm) |
0.328 in (8.34 mm) |
No |
No |
e3 |
0.4 in (10.16 mm) |
No |
Yes |
||||||||||||||||
Texas Instruments |
Operational Amplifier |
Industrial |
Through-Hole |
5 |
TO-220 |
Rectangular |
Plastic/Epoxy |
1.4 MHz |
-35 V |
Yes |
5000 uV |
100 pA |
No |
1 |
106 dB |
15 mA |
-35 V |
Voltage Feedback |
No |
35 V |
±35 V |
Flange Mount |
SIP5,.1,67TB |
5 V/us |
Operational Amplifiers |
8 V/us |
35 V |
0.067 in (1.7 mm) |
85 °C (185 °F) |
100 pA |
Yes |
31600 |
-40 °C (-40 °F) |
Single |
No |
R-PSFM-T5 |
No |
No |
No |
Yes |
||||||||||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Commercial |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
35 MHz |
-18 V |
20000 uV |
No |
1 |
BIPOLAR |
60 dB |
-5 V |
5 V |
Flange Mount |
Operational Amplifiers |
900 V/us |
18 V |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin Over Nickel |
Zig-Zag |
R-PZFM-T7 |
1 |
No |
e3 |
|||||||||||||||||||||||||||||||||||
Analog Devices |
Operational Amplifier |
Commercial |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
35 MHz |
-18 V |
20000 uV |
No |
1 |
BIPOLAR |
60 dB |
-5 V |
5 V |
Flange Mount |
Operational Amplifiers |
900 V/us |
18 V |
70 °C (158 °F) |
0 °C (32 °F) |
Tin/Lead - with Nickel barrier |
Zig-Zag |
R-PZFM-T7 |
1 |
No |
e0 |
||||||||||||||||||||||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Automotive |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
1.8 MHz |
-40 V |
Yes |
6000 uV |
100 pA |
No |
1 |
94 dB |
7.5 mA |
-40 V |
Voltage Feedback |
No |
40 V |
±10/±40 V |
Flange Mount |
SIP7,.1,50TB |
Operational Amplifiers |
7.2 V/us |
40 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
100 pA |
Yes |
63100 |
-40 °C (-40 °F) |
Matte Tin |
Single |
No |
R-PSFM-T7 |
No |
No |
e3 |
No |
Yes |
||||||||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Automotive |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
7.5 MHz |
-40 V |
Yes |
3000 uV |
100 pA |
No |
1 |
86 dB |
94 dB |
6.5 mA |
-40 V |
Voltage Feedback |
No |
Tube |
40 V |
±10/±40 V |
Flange Mount |
SIP7,.1,50TB |
100 pA |
Operational Amplifiers |
23 V/us |
40 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
100 pA |
YES (AVCL>=5) |
63000 |
-40 °C (-40 °F) |
Matte Tin |
Single |
No |
R-PSFM-T7 |
No |
No |
e3 |
No |
Yes |
|||||||||||||||||||
|
Texas Instruments |
Operational Amplifier |
Automotive |
Through-Hole |
7 |
TO-220 |
Rectangular |
Plastic/Epoxy |
7.5 MHz |
-40 V |
Yes |
3000 uV |
100 pA |
No |
1 |
86 dB |
94 dB |
6.5 mA |
-40 V |
Voltage Feedback |
No |
Tube |
40 V |
±10/±40 V |
Flange Mount |
ZIP7,.15,.2TB |
100 pA |
Operational Amplifiers |
23 V/us |
40 V |
0.05 in (1.27 mm) |
125 °C (257 °F) |
100 pA |
YES (AVCL>=5) |
63000 |
-40 °C (-40 °F) |
Matte Tin |
Zig-Zag |
No |
R-PZFM-T7 |
No |
No |
e3 |
No |
Yes |
Operational amplifiers, or op-amps for short, are electronic circuits that provide a high gain amplification of an input voltage signal. They are widely used in electronic circuits for various signal processing tasks due to their versatile nature and high gain characteristics.
An op-amp typically has two input terminals (inverting and non-inverting), an output terminal, and a power supply. The output voltage of the op-amp is proportional to the difference between the voltages at the two input terminals, with the exact gain being determined by the circuit design.
Op-amps can be used in a variety of electronic circuits such as filters, amplifiers, oscillators, and voltage regulators. They can also be used as comparators, with the output switching to one of two voltage levels depending on the relationship between the two input voltages.
One of the main advantages of op-amps is that they can provide a very high gain, making them useful in amplifying small signals or reducing noise. They also have a wide range of input and output impedance, making them compatible with a wide range of electronic circuits. Additionally, op-amps can be designed to have very high input impedance, which means they can detect and amplify signals with minimal loading effects on the circuit they are connected to.