Ball Operational Amplifiers (Op Amps) 250
| Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Nominal Unity Gain Bandwidth | Maximum Negative Supply Voltage Limit | Low-Bias | Maximum Input Offset Voltage | Maximum Average Bias Current (IIB) | Surface Mount | No. of Functions | Minimum Common Mode Reject Ratio | Technology | Screening Level | Nominal Common Mode Reject Ratio | Maximum Supply Current | Nominal Negative Supply Voltage (Vsup) | Architecture | Programmable Power | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Maximum Input Offset Current (IIO) | Minimum Slew Rate | Sub-Category | Nominal Slow Rate | Maximum Non Linearity | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Maximum Bias Current (IIB) @25C | Maximum Common Mode Voltage | Nominal Response Time | Output Type | Frequency Compensation | Minimum Voltage Gain | Minimum Operating Temperature | Terminal Finish | Nominal Voltage Gain | Terminal Position | Low-Offset | JESD-30 Code | Maximum Voltage Gain | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Output Current | Nominal Bandwidth (3dB) | Micropower | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Wideband | Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Analog Devices |
Operational Amplifier |
Industrial |
Ball |
10 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3 MHz |
Yes |
750 uV |
100 pA |
Yes |
2 |
BICMOS |
115 dB |
1.31 mA |
Voltage Feedback |
No |
5 V |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA10,3X4,20 |
Operational Amplifiers |
0.3 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
Yes |
R-PBGA-B10 |
1 |
0.026 in (0.67 mm) |
0.061 in (1.54 mm) |
No |
Yes |
e1 |
30 s |
260 °C (500 °F) |
0.083 in (2.12 mm) |
No |
No |
||||||||||||||||||
|
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
200 kHz |
50 uV |
Yes |
1 |
CMOS |
120 dB |
-3.6 V |
3.6 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
0.08 V/us |
6 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
S-PBGA-B4 |
1 |
0.015 in (0.37 mm) |
0.03 in (0.764 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.03 in (0.764 mm) |
|||||||||||||||||||||||||||||||
|
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
8 |
VFBGA |
Rectangular |
Plastic/Epoxy |
25 uV |
65 uA |
Yes |
2 |
BICMOS |
140 dB |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
R-PBGA-B8 |
1 |
0.027 in (0.69 mm) |
0.042 in (1.077 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.083 in (2.098 mm) |
|||||||||||||||||||||||||||||||||
|
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
25 uV |
65 uA |
Yes |
1 |
140 dB |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
R-PBGA-B6 |
1 |
0.027 in (0.69 mm) |
0.04 in (1.007 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.057 in (1.447 mm) |
||||||||||||||||||||||||||||||||||
|
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
15 MHz |
Yes |
100 uV |
2 nA |
Yes |
1 |
BIPOLAR |
1.2 mA |
Voltage Feedback |
No |
Tape And Reel |
3.3 V |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA4,2X2,16 |
Operational Amplifiers |
8 V/us |
6 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
10 pA |
Yes |
10 |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
Yes |
S-PBGA-B4 |
1 |
0.022 in (0.55 mm) |
0.033 in (0.835 mm) |
No |
No |
e2 |
30 s |
260 °C (500 °F) |
0.033 in (0.835 mm) |
No |
No |
|||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Commercial |
Ball |
8 |
BGA |
Rectangular |
Plastic/Epoxy |
31 kHz |
950 uV |
500 pA |
Yes |
2 |
BICMOS |
75 dB |
1.8 V |
Grid Array |
0.015 V/us |
5.5 V |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Bottom |
R-PBGA-B8 |
0.025 in (0.644 mm) |
0.071 in (1.804 mm) |
No |
e0 |
0.099 in (2.515 mm) |
||||||||||||||||||||||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
5 |
VFBGA |
Rectangular |
Plastic/Epoxy |
10 MHz |
Yes |
750 uV |
250 pA |
Yes |
1 |
CMOS |
90 dB |
1.5 mA |
Voltage Feedback |
5 V |
2.7/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA5,2X3,20/17 |
Operational Amplifiers |
5 V/us |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
1 pA |
Yes |
110000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
Yes |
R-PBGA-B5 |
0.02 in (0.5 mm) |
0.035 in (0.9 mm) |
No |
e0 |
0.051 in (1.29 mm) |
|||||||||||||||||||||||||
|
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
50 kHz |
Yes |
4000 uV |
375 pA |
Yes |
2 |
CMOS |
100 dB |
30 μA |
Voltage Feedback |
No |
Tape And Reel |
1.8 V |
±0.9/±2.5/1.8/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
6500 V/us |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
2 pA |
Yes |
56200 |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
No |
S-PBGA-B8 |
1 |
0.026 in (0.65 mm) |
0.056 in (1.42 mm) |
No |
Yes |
e1 |
260 °C (500 °F) |
0.056 in (1.42 mm) |
No |
No |
|||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
5 |
VFBGA |
Rectangular |
Plastic/Epoxy |
9 MHz |
Yes |
750 uV |
250 pA |
Yes |
1 |
CMOS |
85 dB |
1.5 mA |
Voltage Feedback |
Tape And Reel, 7 Inch |
2.7 V |
2.7/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA5,3X3,17/10 |
Operational Amplifiers |
5 V/us |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
1 pA |
Yes |
110000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
Yes |
R-PBGA-B5 |
1 |
0.02 in (0.5 mm) |
0.035 in (0.9 mm) |
No |
e0 |
0.051 in (1.29 mm) |
|||||||||||||||||||||||
|
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
50 kHz |
Yes |
4000 uV |
375 pA |
Yes |
2 |
CMOS |
100 dB |
30 μA |
Voltage Feedback |
No |
Tape And Reel |
1.8 V |
±0.9/±2.5/1.8/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
6500 V/us |
5.5 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
2 pA |
Yes |
56200 |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
No |
S-PBGA-B8 |
1 |
0.026 in (0.65 mm) |
0.056 in (1.42 mm) |
No |
Yes |
e1 |
30 s |
260 °C (500 °F) |
0.056 in (1.42 mm) |
No |
No |
||||||||||||||||
|
Analog Devices |
Operational Amplifier |
Automotive |
Ball |
5 |
VFBGA |
Rectangular |
Plastic/Epoxy |
10 MHz |
750 uV |
250 pA |
Yes |
1 |
CMOS |
90 dB |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
5 V/us |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
R-PBGA-B5 |
0.02 in (0.5 mm) |
0.035 in (0.9 mm) |
No |
e0 |
0.051 in (1.29 mm) |
||||||||||||||||||||||||||||||||||
|
|
Onsemi |
Operational Amplifier |
Ball |
9 |
VFBGA |
Square |
Plastic/Epoxy |
7 MHz |
Yes |
1500 uV |
800 pA |
Yes |
2 |
66 dB |
86 dB |
2.6 mA |
Voltage Feedback |
No |
Tape And Reel |
3 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA9,3X3,14 |
Operational Amplifiers |
5 V/us |
7 V |
0.014 in (0.35 mm) |
125 °C (257 °F) |
Yes |
63095 |
-40 °C (-40 °F) |
Bottom |
No |
S-PBGA-B9 |
0.017 in (0.441 mm) |
0.04 in (1.02 mm) |
Yes |
0.04 in (1.02 mm) |
No |
No |
|||||||||||||||||||||||||
|
|
Onsemi |
Operational Amplifier |
Ball |
9 |
VFBGA |
Square |
Plastic/Epoxy |
7 MHz |
Yes |
1500 uV |
800 pA |
Yes |
2 |
66 dB |
86 dB |
2.6 mA |
Voltage Feedback |
No |
Tape And Reel |
3 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA9,3X3,14 |
Operational Amplifiers |
5 V/us |
7 V |
0.014 in (0.35 mm) |
125 °C (257 °F) |
Yes |
63095 |
-40 °C (-40 °F) |
Bottom |
No |
S-PBGA-B9 |
0.017 in (0.441 mm) |
0.04 in (1.02 mm) |
Yes |
0.04 in (1.02 mm) |
No |
No |
|||||||||||||||||||||||||
|
STMicroelectronics |
Operational Amplifier |
Automotive |
Ball |
8 |
FBGA |
Square |
Plastic/Epoxy |
No |
2500 uV |
Yes |
2 |
BICMOS |
3 mA |
Voltage Feedback |
No |
Tape And Reel |
2.7/12 V |
Grid Array, Fine Pitch |
BGA8,3X3,20 |
0.7 V/us |
Operational Amplifiers |
14 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
100 nA |
Yes |
70000 |
-40 °C (-40 °F) |
Bottom |
No |
S-PBGA-B8 |
No |
No |
No |
No |
|||||||||||||||||||||||||||||
|
|
STMicroelectronics |
Operational Amplifier |
Automotive |
Ball |
8 |
VFBGA |
Square |
4 MHz |
No |
2500 uV |
100 nA |
Yes |
2 |
BICMOS |
80 dB |
3 mA |
Voltage Feedback |
No |
Tape And Reel |
3 V |
3/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
0.7 V/us |
Operational Amplifiers |
1.3 V/us |
14 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
100 nA |
Yes |
15000 |
-40 °C (-40 °F) |
Bottom |
No |
S-XBGA-B8 |
0.024 in (0.6 mm) |
0.063 in (1.6 mm) |
No |
No |
0.063 in (1.6 mm) |
No |
No |
|||||||||||||||||||||
|
|
STMicroelectronics |
Operational Amplifier |
Automotive |
Ball |
8 |
VFBGA |
Square |
4 MHz |
No |
2500 uV |
100 nA |
Yes |
2 |
BICMOS |
80 dB |
3 mA |
Voltage Feedback |
No |
Tape And Reel |
3 V |
3/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
0.7 V/us |
Operational Amplifiers |
1.3 V/us |
14 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
100 nA |
Yes |
15000 |
-40 °C (-40 °F) |
Bottom |
No |
S-XBGA-B8 |
0.024 in (0.6 mm) |
0.063 in (1.6 mm) |
No |
No |
0.063 in (1.6 mm) |
No |
No |
|||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
5 MHz |
0 V |
No |
6000 uV |
180 nA |
Yes |
1 |
BIPOLAR |
91 dB |
1.2 mA |
0 V |
Voltage Feedback |
No |
5 V |
±1.2/±3.25/2.4/6.5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA6,2X3,20 |
Operational Amplifiers |
2 V/us |
7.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
150 nA |
Yes |
1990 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.069 in (1.75 mm) |
No |
No |
e0 |
0.078 in (1.98 mm) |
No |
No |
||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
3.5 MHz |
5000 uV |
3 uA |
Yes |
2 |
BIPOLAR |
80 dB |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
S-PBGA-B8 |
1 |
0.026 in (0.65 mm) |
0.06 in (1.52 mm) |
No |
e1 |
30 s |
260 °C (500 °F) |
0.06 in (1.52 mm) |
||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3000 uV |
6 uA |
Yes |
1 |
BICMOS |
104 dB |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
e1 |
30 s |
260 °C (500 °F) |
0.06 in (1.52 mm) |
|||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
9 kHz |
No |
15000 uV |
4.25 nA |
Yes |
1 |
BICMOS |
95 dB |
1.5 μA |
Voltage Feedback |
No |
5 V |
2/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA6,2X3,16 |
Operational Amplifiers |
2000 V/us |
6 V |
0.016 in (0.4 mm) |
85 °C (185 °F) |
1.5 nA |
Yes |
5600 |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
No |
R-PBGA-B6 |
1 |
0.027 in (0.69 mm) |
0.034 in (0.865 mm) |
No |
Yes |
e2 |
30 s |
260 °C (500 °F) |
0.05 in (1.27 mm) |
No |
No |
|||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
10 MHz |
No |
4400 uV |
160 nA |
Yes |
1 |
60 dB |
15 μA |
Voltage Feedback |
No |
Tape And Reel |
5 V |
±1.35/±3.25/2.7/6.5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA6,2X3,20 |
15 nA |
Operational Amplifiers |
4 V/us |
7.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
150 nA |
Yes |
5623.413252 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
R-PBGA-B6 |
1 |
0.027 in (0.69 mm) |
0.041 in (1.05 mm) |
No |
No |
e0 |
0.062 in (1.57 mm) |
No |
||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3000 uV |
6 uA |
Yes |
1 |
BICMOS |
104 dB |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
e1 |
30 s |
260 °C (500 °F) |
0.06 in (1.52 mm) |
|||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
15 MHz |
100 uV |
2 nA |
Yes |
1 |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
8 V/us |
6 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
S-PBGA-B4 |
1 |
0.022 in (0.55 mm) |
0.033 in (0.835 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.033 in (0.835 mm) |
|||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
10 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3 MHz |
Yes |
750 uV |
100 pA |
Yes |
2 |
BICMOS |
115 dB |
1.31 mA |
Voltage Feedback |
No |
Tape And Reel |
5 V |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA10,3X4,20 |
Operational Amplifiers |
0.3 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
Yes |
R-PBGA-B10 |
1 |
0.026 in (0.67 mm) |
0.061 in (1.54 mm) |
No |
Yes |
e0 |
0.083 in (2.12 mm) |
No |
No |
||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
12 |
VFBGA |
Rectangular |
Plastic/Epoxy |
10 MHz |
8000 uV |
550 pA |
Yes |
2 |
CMOS |
70 dB |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
10 V/us |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Bottom |
R-PBGA-B12 |
0.026 in (0.67 mm) |
0.061 in (1.54 mm) |
0.08 in (2.02 mm) |
||||||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
9 |
VFBGA |
Square |
Plastic/Epoxy |
4 kHz |
Yes |
8000 uV |
100 pA |
Yes |
2 |
BICMOS |
70 dB |
6.4 μA |
Voltage Feedback |
No |
Tape And Reel |
3 V |
3 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA9,3X3,20 |
Operational Amplifiers |
4000 V/us |
4 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
10 pA |
Yes |
4470 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
S-PBGA-B9 |
1 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
Yes |
e0 |
0.06 in (1.52 mm) |
No |
No |
|||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
3 MHz |
Yes |
750 uV |
100 pA |
Yes |
1 |
BICMOS |
115 dB |
1.31 mA |
Voltage Feedback |
No |
5 V |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
0.3 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
Yes |
S-PBGA-B8 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
Yes |
e0 |
0.06 in (1.52 mm) |
No |
No |
||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
10 |
FBGA |
Rectangular |
Plastic/Epoxy |
Yes |
8000 uV |
Yes |
2 |
CMOS |
5.6 mA |
Voltage Feedback |
No |
3/5 V |
Grid Array, Fine Pitch |
BGA10,3X4,20 |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
Yes |
2240 |
-40 °C (-40 °F) |
Tin/Lead (Sn63Pb37) |
Bottom |
No |
R-PBGA-B10 |
1 |
No |
No |
e0 |
No |
No |
|||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
200 kHz |
50 uV |
Yes |
1 |
CMOS |
120 dB |
-3.6 V |
3.6 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
0.08 V/us |
6 V |
0.016 in (0.4 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
S-PBGA-B4 |
1 |
0.015 in (0.37 mm) |
0.03 in (0.764 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.03 in (0.764 mm) |
|||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
3.5 MHz |
No |
5000 uV |
3 uA |
Yes |
2 |
BIPOLAR |
80 dB |
4.4 mA |
Voltage Feedback |
No |
5 V |
3/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
1 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
S-PBGA-B8 |
1 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
No |
e0 |
0.06 in (1.52 mm) |
No |
No |
|||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
4 |
VFBGA |
Square |
Plastic/Epoxy |
600 uV |
Yes |
1 |
BICMOS |
130 dB |
2.5 μA |
3.6 V |
3.6 V |
Grid Array |
BGA4,2X2,20 |
Operational Amplifiers |
30 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Bottom |
S-PBGA-B4 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
No |
0.039 in (1 mm) |
||||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
6 |
FBGA |
Rectangular |
Plastic/Epoxy |
4400 uV |
Yes |
1 |
BIPOLAR |
1.35 mA |
Voltage Feedback |
±1.35/±3.25/2.7/6.5 V |
Grid Array, Fine Pitch |
BGA6,2X3,20 |
Operational Amplifiers |
7.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
150 nA |
Yes |
2000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
R-PBGA-B6 |
1 |
No |
e0 |
|||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3000 uV |
6 uA |
Yes |
1 |
BICMOS |
104 dB |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
e1 |
30 s |
260 °C (500 °F) |
0.06 in (1.52 mm) |
|||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
8 |
VFBGA |
Rectangular |
Plastic/Epoxy |
25 uV |
65 uA |
Yes |
2 |
BICMOS |
140 dB |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper Nickel |
Bottom |
R-PBGA-B8 |
1 |
0.027 in (0.69 mm) |
0.042 in (1.077 mm) |
e2 |
30 s |
260 °C (500 °F) |
0.083 in (2.098 mm) |
|||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
9 |
VFBGA |
Square |
Plastic/Epoxy |
3 MHz |
Yes |
750 uV |
100 pA |
Yes |
2 |
BICMOS |
115 dB |
1.31 mA |
Voltage Feedback |
No |
5 V |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
0.3 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
Yes |
S-PBGA-B9 |
1 |
0.026 in (0.67 mm) |
0.063 in (1.6 mm) |
No |
Yes |
e0 |
0.063 in (1.6 mm) |
No |
No |
|||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
500 kHz |
No |
2000 uV |
90 nA |
Yes |
2 |
BICMOS |
90 dB |
540 μA |
Voltage Feedback |
No |
5 V |
±0.9/±2.75/1.8/5.5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
0.2 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
60 nA |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
S-PBGA-B8 |
1 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
Yes |
e0 |
0.06 in (1.52 mm) |
No |
No |
||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
10 |
VFBGA |
Rectangular |
Plastic/Epoxy |
10 MHz |
Yes |
8000 uV |
Yes |
2 |
CMOS |
70 dB |
5.6 mA |
Voltage Feedback |
No |
Tape And Reel |
2.7 V |
3/5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA10,3X4,20 |
Operational Amplifiers |
10 V/us |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
Yes |
2240 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
R-PBGA-B10 |
1 |
0.026 in (0.67 mm) |
0.061 in (1.54 mm) |
No |
No |
e0 |
0.083 in (2.12 mm) |
No |
No |
|||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3000 uV |
6 uA |
Yes |
1 |
BICMOS |
104 dB |
200 μA |
3.3 V |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA6,2X3,20 |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Bottom |
R-PBGA-B6 |
0.027 in (0.69 mm) |
0.039 in (1 mm) |
No |
0.06 in (1.52 mm) |
||||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
3.5 MHz |
5000 uV |
3 uA |
Yes |
2 |
BIPOLAR |
80 dB |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
S-PBGA-B8 |
1 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
e0 |
0.06 in (1.52 mm) |
|||||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
9 |
VFBGA |
Square |
Plastic/Epoxy |
4 kHz |
Yes |
8000 uV |
100 pA |
Yes |
2 |
BICMOS |
70 dB |
6.4 μA |
Voltage Feedback |
No |
3 V |
3 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA9,3X3,20 |
Operational Amplifiers |
4000 V/us |
4 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
10 pA |
Yes |
4470 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
S-PBGA-B9 |
1 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
Yes |
e0 |
0.06 in (1.52 mm) |
No |
No |
||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
10 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3 MHz |
Yes |
750 uV |
100 pA |
Yes |
2 |
BICMOS |
115 dB |
1.31 mA |
Voltage Feedback |
No |
5 V |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA10,3X4,20 |
Operational Amplifiers |
0.3 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
Yes |
R-PBGA-B10 |
1 |
0.024 in (0.6096 mm) |
0.059 in (1.4986 mm) |
No |
Yes |
e0 |
0.084 in (2.1336 mm) |
No |
No |
|||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
3.5 MHz |
5000 uV |
3 uA |
Yes |
2 |
BIPOLAR |
80 dB |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
1 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
S-PBGA-B8 |
1 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
e1 |
30 s |
260 °C (500 °F) |
0.06 in (1.52 mm) |
||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
10 MHz |
0 V |
4400 uV |
160 nA |
Yes |
1 |
BIPOLAR |
60 dB |
1.35 mA |
0 V |
Voltage Feedback |
Tape And Reel |
5 V |
±1.35/±3.25/2.7/6.5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA6,2X3,20 |
Operational Amplifiers |
4 V/us |
7.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
150 nA |
Yes |
2000 |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
No |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.069 in (1.75 mm) |
No |
e1 |
30 s |
260 °C (500 °F) |
0.078 in (1.98 mm) |
|||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Automotive |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
3000 uV |
6 uA |
Yes |
1 |
BICMOS |
104 dB |
3.3 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
6 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.039 in (1 mm) |
e1 |
30 s |
260 °C (500 °F) |
0.06 in (1.52 mm) |
|||||||||||||||||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
500 kHz |
0 V |
No |
2000 uV |
90 nA |
Yes |
2 |
BICMOS |
90 dB |
540 μA |
0 V |
Voltage Feedback |
No |
Tape And Reel |
5 V |
±0.9/±2.75/1.8/5.5 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
0.2 V/us |
6 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
60 nA |
Yes |
10000 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
S-PBGA-B8 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
Yes |
e0 |
0.06 in (1.52 mm) |
No |
No |
||||||||||||||||||
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
8 |
VFBGA |
Square |
Plastic/Epoxy |
200 kHz |
0 V |
Yes |
5000 uV |
100 pA |
Yes |
2 |
BIPOLAR |
100 dB |
90 μA |
0 V |
Voltage Feedback |
No |
3 V |
±1.35/±5/2.7/10 V |
Grid Array, Very Thin Profile, Fine Pitch |
BGA8,3X3,20 |
Operational Amplifiers |
0.115 V/us |
11 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Yes |
17780 |
-40 °C (-40 °F) |
Tin Lead |
Bottom |
No |
S-PBGA-B8 |
1 |
0.026 in (0.67 mm) |
0.06 in (1.52 mm) |
No |
Yes |
e0 |
0.06 in (1.52 mm) |
No |
No |
|||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
10 MHz |
4400 uV |
160 nA |
Yes |
1 |
88 dB |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
4 V/us |
7.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.041 in (1.05 mm) |
e1 |
30 s |
260 °C (500 °F) |
0.062 in (1.57 mm) |
||||||||||||||||||||||||||||||||
|
|
Maxim Integrated |
Operational Amplifier |
Industrial |
Ball |
6 |
VFBGA |
Rectangular |
Plastic/Epoxy |
5 MHz |
0 V |
6000 uV |
180 nA |
Yes |
1 |
BIPOLAR |
91 dB |
0 V |
5 V |
Grid Array, Very Thin Profile, Fine Pitch |
Operational Amplifiers |
2 V/us |
7.5 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
R-PBGA-B6 |
1 |
0.026 in (0.67 mm) |
0.069 in (1.75 mm) |
No |
e1 |
30 s |
260 °C (500 °F) |
0.078 in (1.98 mm) |
Operational amplifiers, or op-amps for short, are electronic circuits that provide a high gain amplification of an input voltage signal. They are widely used in electronic circuits for various signal processing tasks due to their versatile nature and high gain characteristics.
An op-amp typically has two input terminals (inverting and non-inverting), an output terminal, and a power supply. The output voltage of the op-amp is proportional to the difference between the voltages at the two input terminals, with the exact gain being determined by the circuit design.
Op-amps can be used in a variety of electronic circuits such as filters, amplifiers, oscillators, and voltage regulators. They can also be used as comparators, with the output switching to one of two voltage levels depending on the relationship between the two input voltages.
One of the main advantages of op-amps is that they can provide a very high gain, making them useful in amplifying small signals or reducing noise. They also have a wide range of input and output impedance, making them compatible with a wide range of electronic circuits. Additionally, op-amps can be designed to have very high input impedance, which means they can detect and amplify signals with minimal loading effects on the circuit they are connected to.