HQCCN Sample & Hold ICs 3
| Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Maximum Negative Supply Voltage Limit | Surface Mount | Maximum Analog Input Voltage | No. of Functions | Technology | Screening Level | Maximum Supply Current | Maximum Droop Rate | Nominal Negative Supply Voltage (Vsup) | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Sub-Category | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Minimum Analog Input Voltage | Nominal Acquisition Time | Minimum Operating Temperature | Terminal Finish | Sample-and-Hold/Track-and-Hold | Terminal Position | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Maximum Acquisition Time | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Analog Devices |
Sample And Hold Circuit |
Industrial |
No Lead |
32 |
HQCCN |
Square |
Ceramic |
Yes |
1 V |
1 |
400000 V/s |
Tape And Reel |
2 V |
-4.752 V |
Chip Carrier, Heat Sink/Slug |
LCC32,.2SQ,20 |
Sample and Hold Circuits |
2.1 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1 V |
0.132 ns |
-40 °C (-40 °F) |
Tungsten Nickel Gold |
Track & Hold (T&H) |
Quad |
S-CQCC-N32 |
3 |
0.043 in (1.1 mm) |
0.193 in (4.9 mm) |
No |
30 s |
260 °C (500 °F) |
INCH_MILLIMETER |
|||||||||
|
|
Analog Devices |
Sample And Hold Circuit |
Industrial |
No Lead |
32 |
HQCCN |
Square |
Ceramic |
Yes |
1 V |
1 |
400000 V/s |
Tape And Reel |
2 V |
Chip Carrier, Heat Sink/Slug |
LCC32,.2SQ,20 |
Sample and Hold Circuits |
2.1 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1 V |
0.132 ns |
-40 °C (-40 °F) |
Track & Hold (T&H) |
Quad |
S-CQCC-N32 |
0.043 in (1.1 mm) |
0.193 in (4.9 mm) |
INCH_MILLIMETER |
|||||||||||||||
|
|
Analog Devices |
Sample And Hold Circuit |
Industrial |
No Lead |
32 |
HQCCN |
Square |
Ceramic |
Yes |
1 V |
1 |
400000 V/s |
2 V |
-4.752 V |
Chip Carrier, Heat Sink/Slug |
LCC32,.2SQ,20 |
Sample and Hold Circuits |
2.1 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1 V |
0.132 ns |
-40 °C (-40 °F) |
Tungsten Nickel Gold |
Track & Hold (T&H) |
Quad |
S-CQCC-N32 |
3 |
0.043 in (1.1 mm) |
0.193 in (4.9 mm) |
No |
260 °C (500 °F) |
INCH_MILLIMETER |
Sample and hold (S/H) ICs, also known as track-and-hold amplifiers, are electronic circuits that capture and store an analog voltage signal at a specific moment in time. The S/H IC holds the input voltage for a short period and outputs a constant voltage that represents the input voltage at the time of sampling.
S/H ICs are commonly used in applications that require the measurement or processing of analog signals, such as in analog-to-digital converters (ADCs), digital signal processors (DSPs), and communication systems.
In an ADC system, the S/H IC is used to capture the analog input voltage signal and hold it steady while the ADC converts it to a digital signal. This allows the ADC to accurately sample the analog signal at a specific time and convert it to a digital value.
S/H ICs typically have a fast acquisition time and low droop rate, which means that they can quickly capture and hold the input signal with minimal voltage drop over time. Some S/H ICs can also provide a high input impedance and low output impedance, which helps to minimize loading effects and improve signal integrity.