Rectangular Sample & Hold ICs 290
| Part | RoHS | Manufacturer | Amplifier Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | Maximum Negative Supply Voltage Limit | Surface Mount | Maximum Analog Input Voltage | No. of Functions | Technology | Screening Level | Maximum Supply Current | Maximum Droop Rate | Nominal Negative Supply Voltage (Vsup) | Packing Method | Nominal Supply Voltage / Vsup (V) | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Sub-Category | Maximum Supply Voltage Limit | Terminal Pitch | Maximum Operating Temperature | Minimum Analog Input Voltage | Nominal Acquisition Time | Minimum Operating Temperature | Terminal Finish | Sample-and-Hold/Track-and-Hold | Terminal Position | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Maximum Acquisition Time | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Renesas Electronics |
Sample And Hold Circuit |
Military |
Through-Hole |
14 |
DIP |
Rectangular |
100k Rad(Si) |
Ceramic, Metal-Sealed Cofired |
No |
1 |
BIPOLAR |
In Line |
Sample and Hold Circuits |
0.1 in (2.54 mm) |
125 °C (257 °F) |
-55 °C (-67 °F) |
Gold |
Sample and Hold (S&H) |
Dual |
R-CDIP-T14 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
6 µs |
e4 |
INCH_MILLIMETER |
||||||||||||||||||
|
|
Renesas Electronics |
Sample And Hold Circuit |
Military |
Through-Hole |
14 |
DIP |
Rectangular |
100k Rad(Si) |
Ceramic, Glass-Sealed |
-20 V |
No |
10 V |
1 |
BIPOLAR |
MIL-PRF-38535 Class Q |
-15 V |
15 V |
In Line |
Sample and Hold Circuits |
20 V |
0.1 in (2.54 mm) |
125 °C (257 °F) |
-10 V |
-55 °C (-67 °F) |
Matte Tin |
Sample and Hold (S&H) |
Dual |
R-GDIP-T14 |
0.2 in (5.08 mm) |
0.3 in (7.62 mm) |
No |
6 µs |
e3 |
Sample and hold (S/H) ICs, also known as track-and-hold amplifiers, are electronic circuits that capture and store an analog voltage signal at a specific moment in time. The S/H IC holds the input voltage for a short period and outputs a constant voltage that represents the input voltage at the time of sampling.
S/H ICs are commonly used in applications that require the measurement or processing of analog signals, such as in analog-to-digital converters (ADCs), digital signal processors (DSPs), and communication systems.
In an ADC system, the S/H IC is used to capture the analog input voltage signal and hold it steady while the ADC converts it to a digital signal. This allows the ADC to accurately sample the analog signal at a specific time and convert it to a digital value.
S/H ICs typically have a fast acquisition time and low droop rate, which means that they can quickly capture and hold the input signal with minimal voltage drop over time. Some S/H ICs can also provide a high input impedance and low output impedance, which helps to minimize loading effects and improve signal integrity.