MALE RF Adapters 5
| Part | RoHS | Manufacturer | Connector Type | Option | Reliability | Contact Gender | Dielectric Withstanding Voltage (V) | No. of Connectors | Panel Mount | Body Length | Mixed Contacts | Insertion Loss | EMI Shielded | Filter Feature | Termination Contact Finish | MIL Conformity | Coupling Type | Insulator Material | Maximum Operating Temperature (Cel) | DIN Conformance | IEC Conformity | Minimum Operating Temperature | Empty Shell | Shell Finish | No. of Ports | Adapter Style | Contact Material | Mating Contact Finish | Additional Features | Rated Current - Signal | Voltage Standing Wave Ratio | Reference Standard | Insulator Color | No. of Contacts - Side1 | No. of Contacts - Side2 | Total No. of Contacts | Durability | Mounting Type | Characteristic Impedance | Sub-Category | Shell Material | Cable Types | Mains Connector Rating | Manufacturer Series | Body or Shell Style | Mounting Style | Contact Style | JESD-609 Code | Maximum Operating Frequency |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TE Connectivity |
RF STRAIGHT ADAPTER |
GENERAL PURPOSE |
COMMERCIAL |
MALE |
ONE |
NO |
.874 inch |
NO |
.25 dB |
NO |
NO |
NO |
SNAP |
POLYTETRAFLUOROETHYLENE |
165 |
NO |
NO |
-65 Cel |
YES |
1 |
SMA-SMA |
NOT SPECIFIED |
NOT SPECIFIED |
CAPTIVE CENTRE CONTACT |
1.16 |
1 |
PANEL |
50 ohm |
RF Adapters |
STAINLESS STEEL |
115/230VAC |
PLUG |
STRAIGHT |
COAX |
18 GHz |
|||||||||||||
|
Trompeter Electronics |
RF STRAIGHT ADAPTER |
GENERAL PURPOSE |
MALE |
NO |
NO |
NICKEL |
NO |
BAYONET-THREADED |
NO |
NO |
NOT SPECIFIED |
NICKEL |
PLUG |
||||||||||||||||||||||||||||||||||||
|
|
Radiall S A |
RF STRAIGHT ADAPTER |
GENERAL PURPOSE |
MALE |
NO |
.76 dB |
NO |
NOT APPLICABLE |
NO |
SNAP-THREADED |
POLYTETRAFLUOROETHYLENE |
NO |
NO |
SMA2.9-SBMO |
NOT SPECIFIED |
NOT SPECIFIED |
CAPTIVE CENTER CONTACT |
1.7 |
50 ohm |
40 GHz |
|||||||||||||||||||||||||||||
|
Trompeter Electronics |
RF STRAIGHT ADAPTER |
GENERAL PURPOSE |
MALE |
NO |
NO |
NICKEL |
NO |
BAYONET-THREADED |
NO |
NO |
N-BNC |
NOT SPECIFIED |
NICKEL |
PLUG |
|||||||||||||||||||||||||||||||||||
|
|
Radiall S A |
RF STRAIGHT ADAPTER |
GENERAL PURPOSE |
MALE |
YES |
NO |
GOLD OVER NICKEL |
YES |
SNAP |
POLYTETRAFLUOROETHYLENE |
NO |
YES |
SMB-SMB |
NOT SPECIFIED |
NOT SPECIFIED |
STANDARDS: MIL-C-39012; IEC 169-10, CAPTIVE CENTER CONTACT |
50 ohm |
e4 |
4 GHz |
RF adapters are a type of connector used to connect two different types of RF connectors together. They are commonly used in radio frequency (RF) applications, where different types of connectors may be required for specific applications.
RF adapters typically consist of a male and female connector, with the male connector featuring pins or threads that connect to the female connector, which has sockets or threads to receive the pins or threads. They may be straight or angled, and are available in a range of sizes and configurations to accommodate different types of RF connectors.
One advantage of RF adapters is their ability to provide compatibility between different types of RF connectors, allowing for flexibility in RF systems design. They can also be used to convert impedance or to change gender, depending on the specific requirements of the application.
RF adapters are commonly used in a variety of industrial and consumer applications, including telecommunications, wireless communication systems, and test and measurement equipment. They may be subject to rigorous testing and qualification requirements to ensure their reliability and performance.