16 Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADS1220IPWR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.5 V

2 kHz

1

24

490 μA

0.0015 %

3.3 V

2's Complement Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Other Converters

2.3 V

0.026 in (0.65 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

ADS1220IPW

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.5 V

2 kHz

1

24

490 μA

0.0015 %

3.3 V

2's Complement Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Other Converters

2.3 V

0.026 in (0.65 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

0.197 in (5 mm)

HX711

Avia Semiconductor (Xiamen)

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

24

5 V

2's Complement Binary

Small Outline

SOP16,.25

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Dual

R-PDSO-G16

0.154 in (3.9 mm)

0.39 in (9.9 mm)

ADS7924IRTER

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

16

HVQCCN

Square

Plastic/Epoxy

4

Yes

5.5 V

100 kHz

1

CMOS

12

8 μA

0.0366 %

5 V

Binary

1.8/5,2.5/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS7828EB/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

50 kHz

1

CMOS

12

0.0244 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1220IRVAT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

4

Yes

2.5 V

2 kHz

1

24

490 μA

0.0015 %

3.3 V

2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.14SQ,20

Other Converters

2.3 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Quad

S-PQCC-N16

2

0.039 in (1 mm)

0.138 in (3.5 mm)

No

e4

260 °C (500 °F)

0.138 in (3.5 mm)

PCF8591T/2,518

NXP Semiconductors

Data Acquisition Device

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

4

Yes

6 V

11.1 kHz

1

CMOS

8

1 mA

0.5859 %

5 V

2's Complement Binary

Small Outline

SOP16,.4

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

90 µs

R-PDSO-G16

0.104 in (2.65 mm)

0.295 in (7.5 mm)

0.406 in (10.3 mm)

ADS1220IRVAR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

4

Yes

2.5 V

2 kHz

1

24

490 μA

0.0015 %

3.3 V

2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.14SQ,20

Other Converters

2.3 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Quad

S-PQCC-N16

2

0.039 in (1 mm)

0.138 in (3.5 mm)

No

e4

260 °C (500 °F)

0.138 in (3.5 mm)

ADC128D818CIMTX/NOPB

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

82 Hz

1

12

740 μA

0.0977 %

3.3 V

Binary

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

3 V

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADC128S102CIMTX/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

1 MHz

1

CMOS

12

3.1 mA

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

16.25 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1246IPW

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.048 V

2 kHz

1

24

0.0015 %

5 V

2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7828EB/250

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

50 kHz

1

CMOS

12

0.0244 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7830IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

70 kHz

1

CMOS

8

0.1953 %

2.7 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

5 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2440IGN#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

350 kHz

1

24

0.0015 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

170 ms

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

LTC1867AIGN#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

200 kHz

1

16

1.8 mA

0.0038 %

5 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

LTC2440CGN

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.75 V

350 kHz

1

24

0.0015 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Tin Lead

Dual

170 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.8895 mm)

MCP3208-CI/SL

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

100 kHz

1

CMOS

TS 16949

12

0.0488 %

5 V

Binary

5 V

0 V

Small Outline

SOP16,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

6 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40 s

260 °C (500 °F)

0.39 in (9.9 mm)

LTC2440CGN#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

350 kHz

1

24

0.0015 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

70 °C (158 °F)

-2.5 V

Serial

0 °C (32 °F)

Matte Tin

Dual

170 ms

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

LTC1867CGN#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

200 kHz

1

16

1.8 mA

0.0061 %

5 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

3.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

ADS7828EB/250G4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

50 kHz

1

CMOS

12

0.0244 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1120IPWR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.5 V

2 kHz

1

16

490 μA

0.002 %

3.3 V

2's Complement Binary

-2.5 V

Small Outline, Thin Profile, Shrink Pitch

2.3 V

0.026 in (0.65 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

0.5 ns

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

260 °C (500 °F)

0.197 in (5 mm)

ADS7828EB/2K5G4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

50 kHz

1

CMOS

12

0.0244 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

ADC128S102CIMT/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

1 MHz

1

CMOS

12

3.1 mA

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

16.25 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1246IPWR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.048 V

2 kHz

1

24

0.0015 %

5 V

2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7841EB/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

200 kHz

1

CMOS

12

0.0244 %

5 V

Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

2.7 V

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.75 µs

R-PDSO-G16

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS7924IRTET

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

16

HVQCCN

Square

Plastic/Epoxy

4

Yes

5.5 V

100 kHz

1

CMOS

12

8 μA

0.0366 %

5 V

Binary

1.8/5,2.5/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS1271IPWR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

105 kHz

1

24

10 mA

0.0015 %

5 V

2's Complement Binary

1.8/3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

105 °C (221 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

18.9629 µs

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADC128D818CIMT/NOPB

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

82 Hz

1

12

740 μA

0.0977 %

3.3 V

Binary

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

3 V

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7828E/250

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

50 kHz

1

CMOS

12

0.0488 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC1867IGN#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

200 kHz

1

16

1.8 mA

0.0061 %

5 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

ADC128S022CIMTX/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

200 kHz

1

CMOS

12

2.3 mA

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

16.25 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1271IPW

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

105 kHz

1

24

10 mA

0.0015 %

5 V

2's Complement Binary

1.8/3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

105 °C (221 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

18.9629 µs

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7828E/250G4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

50 kHz

1

CMOS

12

0.0488 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2440IGN#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

350 kHz

1

24

0.0015 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

170 ms

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

ADS1271IPWG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

105 kHz

1

24

25 mA

0.0015 %

5 V

2's Complement Binary

1.8/3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

105 °C (221 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

18.9629 µs

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7828E/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

50 kHz

1

CMOS

12

0.0488 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7793BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5 V

1

24

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1120QPWRQ1

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.75 V

2 kHz

1

AEC-Q100

16

490 μA

0 %

2.5 V

2's Complement Binary

-2.5 V

Small Outline, Thin Profile, Shrink Pitch

2.3 V

0.026 in (0.65 mm)

125 °C (257 °F)

-750 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC1867ACGN#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

200 kHz

1

16

1.8 mA

0.0038 %

5 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

3.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

LTC1867ACGN#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

200 kHz

1

16

1.8 mA

0.0038 %

5 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

3.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

LTC2440CGN#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

350 kHz

1

24

0.0015 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

70 °C (158 °F)

-2.5 V

Serial

0 °C (32 °F)

Matte Tin

Dual

170 ms

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

MAX187BCWE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.096 V

75 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

8.5 µs

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

20 s

240 °C (464 °F)

0.406 in (10.3 mm)

MAX187BCWE+

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.096 V

75 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin - annealed

Track

Dual

8.5 µs

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ADS7830IPWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

70 kHz

1

CMOS

8

0.1953 %

2.7 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

5 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7945SRTET

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2

Yes

5.25 V

2 MHz

1

CMOS

14

5 mA

0.0092 %

5 V

Binary

1.8/5,3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

400 ns

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS1271IPWRG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

105 kHz

1

24

10 mA

0.0015 %

5 V

2's Complement Binary

1.8/3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

105 °C (221 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

18.9629 µs

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LTC1867AIGN#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

200 kHz

1

16

1.8 mA

0.0038 %

5 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

LTC2440IGN

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.75 V

350 kHz

1

24

0.0015 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Tin Lead

Dual

170 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.8895 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.