20 Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

LTC1609CSW

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

200 kHz

1

16

0.0046 %

5 V

Binary, 2's Complement Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-10 V

Serial

0 °C (32 °F)

Tin Lead

Sample

Dual

3 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

0.504 in (12.8 mm)

MAX11901ETP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

20

HVQCCN

Square

1

Yes

3.6 V

1.6 MHz

1

CMOS

16

0.0008 %

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Quad

S-XQCC-N20

1

0.031 in (0.8 mm)

0.157 in (4 mm)

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

TLC0838CPW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

31 kHz

1

CMOS

8

1.25 mA

0.3906 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

4.5 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

32 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

TLC3544IPWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

4.07 V

200 kHz

1

CMOS

14

0.0061 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

2.785 µs

R-PDSO-G20

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.256 in (6.5 mm)

TLV1548CDB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

87 kHz

1

CMOS

10

1.5 mA

0.0977 %

2.7 V

Binary

3/5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel/Palladium/Gold

Sample

Dual

25 µs

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.283 in (7.2 mm)

AD7707BRU

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

1

CMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

30 s

240 °C (464 °F)

0.256 in (6.5 mm)

AD7707BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

1

CMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

40 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7866ARU-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

1 MHz

1

12

0.0366 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.256 in (6.5 mm)

AD977BRZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

100 kHz

1

BICMOS

16

0.0031 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

8 µs

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

ADC0838CCWM/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

6.3 V

31.25 kHz

1

Bipolar

8

0.3906 %

5 V

Binary

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

32 µs

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

LTC1609CSW#TR

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

200 kHz

1

16

0.0046 %

5 V

Binary, 2's Complement Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-10 V

Serial

0 °C (32 °F)

Tin/Lead

Sample

Dual

3 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

0.504 in (12.8 mm)

LTC2309HF#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

14 kHz

1

12

0.0244 %

5 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

1.8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

LTC2309IF#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

14 kHz

1

12

0.0244 %

5 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

1.8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

MAX1148BCUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

4.116 V

116.66 kHz

1

BICMOS

14

0.0122 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

MAX1148BCUP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

4.116 V

116.66 kHz

1

BICMOS

14

0.0122 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin - annealed

Track

Dual

8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

MAX1280BEUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.52 V

400 kHz

1

BICMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

MAX1280BEUP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

400 kHz

1

BICMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

MAX186CCAP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

10 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

245 °C (473 °F)

0.283 in (7.2 mm)

MAX186CCAP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Matte Tin - annealed

Track

Dual

10 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e3

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

MAX186CCWP-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

10 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

0.504 in (12.8 mm)

MAX186CCWP+T

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Matte Tin - annealed

Track

Dual

10 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

TLV2553IDWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

200 kHz

1

12

1.2 mA

0.0244 %

5 V

Binary, 2's Complement Binary

3/5 V

Small Outline

SOP20,.4

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

4.15 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.505 in (12.825 mm)

AD7091R-5BRUZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

1

12

0.0305 %

3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Track

Dual

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7866BRU

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

1 MHz

1

12

0.0366 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.256 in (6.5 mm)

ADS117L11IRUKT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

No Lead

20

HVQCCN

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

16

2.7 mA

0.0015258 %

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.12SQ,16

1.65 V

0.016 in (0.4 mm)

125 °C (257 °F)

-1 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N20

1

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

ADS1254E/2K5G4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

20 kHz

1

CMOS

24

1.15 mA

0.0015 %

5 V

Offset Binary, 2's Complement Binary

1.8/3.6,5 V

Small Outline, Shrink Pitch

SSOP20,.25

Analog to Digital Converters

1.8 V

0.025 in (0.635 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G20

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

ADS7809P

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

100 kHz

1

CMOS

16

0.0046 %

5 V

Binary, 2's Complement Binary

5 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Sample

Dual

8 µs

R-PDIP-T20

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1 in (25.4 mm)

HI7190IBZ

Renesas Electronics

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

1

24

2 mA

0.0015 %

5 V

Offset Binary, 2's Complement Binary

-5 V

Small Outline

SOP20,.4

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

LTC1290CISW#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.05 V

50 kHz

1

CMOS

12

0.0122 %

5 V

2's Complement Binary

-5 V

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-5.05 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

13 µs

R-PDSO-G20

1

0.104 in (2.642 mm)

0.295 in (7.493 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8015 mm)

LTC1296DCN#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

8

No

5.05 V

46.5 kHz

1

CMOS

12

12 mA

0.0183 %

5 V

Binary, 2's Complement Binary

-5 V

In-Line

0.1 in (2.54 mm)

70 °C (158 °F)

-5.05 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

12 µs

R-PDIP-T20

1

0.15 in (3.81 mm)

0.3 in (7.62 mm)

No

e3

30 s

260 °C (500 °F)

MAX1147BCUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

2.52 V

116.66 kHz

1

BICMOS

14

0.0122 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

MAX1147BCUP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

2.52 V

116.66 kHz

1

BICMOS

14

0.0122 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin - annealed

Track

Dual

8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

MAX149ACAP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

133 kHz

1

CMOS

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-1.25 V

Serial

0 °C (32 °F)

Tin Lead

Sample

Dual

65 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

0.283 in (7.2 mm)

MAX149ACAP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

133 kHz

1

CMOS

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-1.25 V

Serial

0 °C (32 °F)

Matte Tin - annealed

Sample

Dual

65 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e3

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

MAX186DEAP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

10 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

245 °C (473 °F)

0.283 in (7.2 mm)

MAX186DEAP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

133 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5/±5 V

-5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

10 µs

R-PDSO-G20

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e3

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

MAX192BCPP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

8

No

2.048 V

133 kHz

1

CMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

5 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Tin Lead

Track

Dual

2 µs

R-PDIP-T20

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

245 °C (473 °F)

1.03 in (26.16 mm)

MAX192BCPP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

8

No

2.048 V

133 kHz

1

CMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

5 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-2.048 V

Serial

0 °C (32 °F)

Matte Tin - annealed

Track

Dual

2 µs

R-PDIP-T20

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e3

30 s

260 °C (500 °F)

1.03 in (26.16 mm)

TLC1543QDBG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

5 V

Binary

5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

4.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

TLC2543CDBG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

66 kHz

1

CMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

10 µs

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

TLV2556IPWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

200 kHz

1

12

3 mA

0.0244 %

5 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

5.54 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

TLV2556MPWREP

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

200 kHz

1

12

2.4 mA

0.0244 %

5 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Sample

Dual

6.46 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

TLV2556MPWREPG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

11

Yes

4.25 V

200 kHz

1

12

2.4 mA

0.0244 %

5 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Sample

Dual

6.46 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7327TRU-EP-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Military

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

500 kHz

1

CMOS

12

0.0305 %

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

0.026 in (0.65 mm)

125 °C (257 °F)

-10 V

Serial

-55 °C (-67 °F)

Track

Dual

1.6 µs

R-PDSO-G20

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.256 in (6.5 mm)

AD7327TRUZ-EP

Analog Devices

Analog To Digital Converter, Successive Approximation

Military

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

500 kHz

1

CMOS

12

0.0305 %

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

0.026 in (0.65 mm)

125 °C (257 °F)

-10 V

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Track

Dual

1.6 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7703ARZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

16 kHz

1

CMOS

20

0.003 %

5 V

Binary, Offset Binary

-5 V

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

AD7822BRZ

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

2 MHz

1

CMOS

8

0.293 %

3 V

Binary

3/5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Track

Dual

420 ns

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

AD7822BRZ-REEL

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

2 MHz

1

CMOS

8

0.293 %

3 V

Binary

3/5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Track

Dual

420 ns

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.