28 Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADS8372IBRHPR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

28

HVQCCN

Square

Plastic/Epoxy

1

Yes

4.2 V

600 kHz

1

CMOS

16

0.0011 %

5 V

2's Complement Binary

3/5,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC28(UNSPEC)

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-4.2 V

Serial

-40 °C (-40 °F)

Sample

Quad

1.16 µs

S-PQCC-N28

0.039 in (1 mm)

0.236 in (6 mm)

No

0.236 in (6 mm)

ADS574KEG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

40 kHz

1

CMOS

12

0.0244 %

5 V

Binary, Offset Binary

5,5/-15 V

-15 V

In-Line

DIP28,.3

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-10 V

Parallel, Word

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

25 µs

R-PDIP-T28

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

1.405 in (35.69 mm)

ADS8517IBDWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

200 kHz

1

16

0.0023 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

2.5 µs

R-PDSO-G28

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ADS7819PB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

2.5 V

800 kHz

1

CMOS

12

0.0183 %

5 V

2's Complement Binary

±5 V

-5 V

In-Line

DIP28,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

1.25 µs

R-PDIP-T28

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.405 in (35.69 mm)

TLC532AIFN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

28

QCCJ

Square

Plastic/Epoxy

1

Yes

6.8 V

66.67 kHz

1

CMOS

8

2 mA

0.195 %

5 V

Binary

5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-300 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Sample

Quad

S-PQCC-J28

0.18 in (4.57 mm)

0.453 in (11.5062 mm)

No

0.453 in (11.5062 mm)

THS1215CPWR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

15 MHz

1

CMOS

12

0.061 %

3.3 V

Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-2 V

Parallel, Word

0 °C (32 °F)

Sample

Dual

66 ns

R-PDSO-G28

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.382 in (9.7 mm)

ADC0809FN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

28

QCCJ

Square

Plastic/Epoxy

8

Yes

6.8 V

10 kHz

1

CMOS

8

3 mA

5 V

Offset Binary

5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-300 mV

Parallel, Word

-40 °C (-40 °F)

Sample

Quad

116 µs

S-PQCC-J28

0.18 in (4.57 mm)

0.453 in (11.5062 mm)

No

0.453 in (11.5062 mm)

ADS7810UB/1KE4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

800 kHz

1

CMOS

12

0.0183 %

5 V

2's Complement Binary

±5 V

-5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

1.02 µs

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADC10080CIMT/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

80 MHz

1

CMOS

10

32 mA

0.1562 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G28

3

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

Peak-to-peak input voltage range: 2 V

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

ADS7807U/1KG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

40 kHz

1

CMOS

16

0.0046 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

20 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ICL7135CFN

Texas Instruments

Analog To Digital Converter, Dual-Slope

Commercial

J Bend

28

QCCJ

Square

Plastic/Epoxy

1

Yes

7.5 V

1

CMOS

4

2 mA

0.005 %

5 V

Binary Coded Decimal

±5 V

-5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-7.5 V

Parallel, Word

0 °C (32 °F)

Quad

S-PQCC-J28

0.18 in (4.57 mm)

0.453 in (11.5062 mm)

No

0.453 in (11.5062 mm)

TLC545CN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

19

No

5.5 V

76 kHz

1

CMOS

8

0.1953 %

5 V

Binary

5 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Sample

Dual

9 µs

R-PDIP-T28

0.2 in (5.08 mm)

0.6 in (15.24 mm)

No

1.43 in (36.32 mm)

ADS8505IDBG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

250 kHz

1

CMOS

16

0.0061 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

2.2 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS574KU

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

40 kHz

1

CMOS

12

0.0244 %

5 V

Binary, Offset Binary

5,5/-15 V

-15 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-10 V

Parallel, Word

0 °C (32 °F)

Sample

Dual

25 µs

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADC12441CMJ

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

Through-Hole

28

DIP

Rectangular

Ceramic, Glass-Sealed

1

No

5.55 V

55 kHz

1

CMOS

12

0.0183 %

5 V

2's Complement Binary

-5 V

In-Line

0.1 in (2.54 mm)

125 °C (257 °F)

-5.55 V

Parallel, Word

-55 °C (-67 °F)

Sample

Dual

13.8 µs

R-GDIP-T28

0.225 in (5.715 mm)

0.6 in (15.24 mm)

1.49 in (37.846 mm)

ADS931E/1K

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

30 MHz

1

CMOS

8

29 mA

0.9766 %

3 V

Offset Binary

3/5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

1 V

Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

THS1031IPWR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

30 MHz

1

CMOS

10

0.1953 %

3.3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G28

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.382 in (9.7 mm)

TLV5580IPW

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

80 MHz

1

CMOS

8

0.9375 %

3.3 V

Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

800 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Sample

Dual

12.5 ns

R-PDSO-G28

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.382 in (9.7 mm)

TLV5580CDWG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

80 MHz

1

CMOS

8

0.9375 %

3.3 V

Binary

3.3 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

800 mV

Parallel, 8 Bits

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

12.5 ns

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

THS1041IDW

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

1 V

40 MHz

1

CMOS

10

0.1465 %

3 V

Binary, 2's Complement Binary

3 V

Small Outline

SOP28,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-1 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

25 ns

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ADS7842E/1KG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

200 kHz

1

CMOS

12

0.0488 %

5 V

Binary

3/5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

TL0808FN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

28

QCCJ

Square

Plastic/Epoxy

8

Yes

6.8 V

10 kHz

1

CMOS

8

3 mA

5 V

Binary

5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-300 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Quad

116 µs

S-PQCC-J28

0.18 in (4.57 mm)

0.453 in (11.5062 mm)

No

0.453 in (11.5062 mm)

TL532N

Texas Instruments

Analog To Digital Converter

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

1

CMOS

8

5 V

Offset Binary

5 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

Dual

R-PDIP-T28

No

ADS8515IBDB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

250 kHz

1

CMOS

16

25 mA

0.0031 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

4 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

THS1230CPWG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

30 MHz

1

CMOS

12

0.0488 %

3.3 V

Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

-2 V

Parallel, Word

0 °C (32 °F)

Sample

Dual

33 ns

R-PDSO-G28

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.382 in (9.7 mm)

ADS8372IBRHPTG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

28

HVQCCN

Square

Plastic/Epoxy

1

Yes

4.2 V

600 kHz

1

CMOS

16

0.0011 %

5 V

2's Complement Binary

3/5,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC28,.2SQ,20

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-4.2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

1.16 µs

S-PQCC-N28

2

0.039 in (1 mm)

0.236 in (6 mm)

No

e4

30 s

260 °C (500 °F)

0.236 in (6 mm)

ADS1282HPW

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Military

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

1.25 V

1

24

10 mA

0.009 %

2.5 V

2's Complement Binary

±2.5,3.3 V

-2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

175 °C (347 °F)

-1.25 V

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G28

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

ADS7807PB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

40 kHz

1

CMOS

16

0.0023 %

5 V

Binary, 2's Complement Binary

5 V

In-Line

DIP28,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

20 µs

R-PDIP-T28

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

1.405 in (35.69 mm)

ADC0808MFN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

No Lead

28

QCCN

Square

Ceramic, Metal-Sealed Cofired

1

Yes

6.8 V

10 kHz

1

CMOS

8

3 mA

Offset Binary

Chip Carrier

125 °C (257 °F)

-300 mV

Parallel, 8 Bits

-55 °C (-67 °F)

Sample

Quad

116 µs

S-CQCC-N28

No

ADS807E

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

3 V

53 MHz

1

CMOS

12

0.0977 %

5 V

Offset Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-3 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

Peak-to-peak input voltage range: 2, 3 V

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS804U

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

10 MHz

1

Bipolar

12

0.0488 %

5 V

Offset Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

1.5 V

Parallel, Word

-40 °C (-40 °F)

Track

Dual

100 µs

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADC0848BCV

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

28

QCCJ

Square

Plastic/Epoxy

8

Yes

5 V

33 kHz

1

CMOS

8

0.1953 %

5 V

Binary

5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Quad

60 µs

S-PQCC-J28

2A

0.18 in (4.57 mm)

0.45 in (11.43 mm)

No

e0

245 °C (473 °F)

0.45 in (11.43 mm)

ADS574JU/1K

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

40 kHz

1

CMOS

12

0.0244 %

5 V

Binary, Offset Binary

5,5/-15 V

-15 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-10 V

Parallel, Word

0 °C (32 °F)

Sample

Dual

25 µs

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADS8505IDWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

250 kHz

1

CMOS

16

15 mA

0.0061 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

2.2 µs

R-PDSO-G28

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

TLC545IFNR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

28

QCCJ

Square

Plastic/Epoxy

19

Yes

5.5 V

76 kHz

1

CMOS

8

0.1953 %

5 V

Binary

5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Quad

9 µs

S-PQCC-J28

0.18 in (4.57 mm)

0.453 in (11.505 mm)

No

0.453 in (11.505 mm)

ADS7819UB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

800 kHz

1

CMOS

12

0.0183 %

5 V

2's Complement Binary

±5 V

-5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

1.25 µs

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

PCM1750U/1KG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.75 V

192 kHz

1

CMOS

18

0.003 %

5 V

2's Complement Binary

±5 V

-5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.75 V

Serial

-40 °C (-40 °F)

Sample

Dual

20.8 µs

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADS7871IDB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

48 kHz

1

CMOS

14

2 mA

0.0122 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

THS1031CDWG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

30 MHz

1

CMOS

10

0.1953 %

3.3 V

Binary, 2's Complement Binary

3/5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Parallel, Word

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.905 mm)

PGA450IPWRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

2

12

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Dual

R-PDSO-G28

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.382 in (9.7 mm)

ADS7805PG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Other

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

100 kHz

1

CMOS

16

0.0061 %

5 V

2's Complement Binary

5 V

In-Line

DIP28,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-25 °C (-13 °F)

Nickel Palladium Gold

Sample

Dual

8 µs

R-PDIP-T28

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

1.405 in (35.69 mm)

ADS806E

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

830 Hz

1

12

0.0488 %

5 V

Offset Binary

Small Outline

85 °C (185 °F)

1.5 V

Parallel, Word

-40 °C (-40 °F)

Track

Dual

100 µs

R-PDSO-G28

No

ADS8515IBDBR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

250 kHz

1

CMOS

16

25 mA

0.0031 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

4 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS828E/1KG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

75 MHz

1

CMOS

10

0.293 %

5 V

Offset Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

1.5 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS774KUE4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

117 kHz

1

CMOS

12

0.0122 %

5 V

Binary, Offset Binary

5,5/-15 V

-15 V

Small Outline

SOP28,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

8.5 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ADC12138CIMSAX

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

1

12

0.0488 %

5 V

2's Complement Binary

3.3/5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Sample

Dual

8.8 µs

R-PDSO-G28

4

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

20 s

235 °C (455 °F)

0.402 in (10.2 mm)

ADC12138CIWMX

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

1

12

0.0488 %

5 V

2's Complement Binary

3.3/5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Sample

Dual

8.8 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

260 °C (500 °F)

0.705 in (17.9 mm)

ADS7825U/1KE4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

40 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

20 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.703 in (17.85 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.